Automatic Fish Feeder Design

$30-250 USD

Posted 1 minute ago

•

Ends in 6 days

$30-250 USD

Paid on delivery

# Project: Automatic Fish Feeder with Timer-Controlled Opening and Closing Mechanism ## 1. Project Overview I am looking for a mechanical/electrical designer to develop a simple and affordable Automatic Fish Feeder for fish farming. I already have a basic design concept and some reference images. However, I am open to modifying the existing design to achieve a more practical, reliable and cost-effective system. The main objective is to automatically release fish pellets at programmed feeding times using a simple electrical timer and an opening/closing mechanism. ## 2. Main Design Requirements The proposed feeder should consist of: 1. **Feed Hopper:** An existing 5-gallon (19-litre) plastic water dispenser bottle installed upside down to store fish pellets. 2. **Feeder Housing:** A rectangular Stainless Steel 304 housing containing the feeding mechanism. 3. **Automatic Opening/Closing Mechanism:** A simple mechanism that opens the feed outlet when activated and automatically closes it after a preset duration. A spring-return sliding gate with a 12V DC solenoid actuator is one possible solution. 4. **Digital Timer:** An external plug-in programmable digital timer to control the feeding schedule. It should allow multiple feeding times per day. 5. **Electrical Components:** Simple and affordable components such as: - Plug-in digital timer. - 12V DC power adapter. - 12V one-shot timer relay. - 12V DC solenoid actuator. - Suitable fuse and wiring. 6. **Feed Outlet:** A suitable outlet and stainless-steel spreader to distribute pellets into the fish tank. 7. **Support Frame:** A simple Stainless Steel 304 frame to support the feeder above the fish tank. ## 3. Working Principle The proposed operating sequence is: 1. Fish pellets are stored inside the inverted water bottle. 2. The digital timer activates the system at the programmed feeding time. 3. The 12V solenoid actuator opens the feed outlet. 4. Fish pellets are released into the tank. 5. After a preset duration (approximately 1–5 seconds), the actuator switches off. 6. A return spring automatically closes the outlet. The opening duration and feed quantity should be adjustable. ## 4. Proposed Electrical Connection The preferred electrical arrangement is: 240V AC Wall Socket → Digital Programmable Timer → 12V DC Power Adapter → One-Shot Timer Relay → 12V DC Solenoid Actuator. The one-shot timer relay should activate the solenoid for a short period at each scheduled feeding time. I prefer a simple system without Arduino, complicated programming or expensive electronic controllers. ## 5. Materials - Stainless Steel 304: Main housing, support frame and outlet. - Food-grade plastic: Feed gate or metering components. - Existing 5-gallon plastic water bottle: Feed hopper. - Stainless steel and suitable spring material: Opening/closing mechanism. ## 6. Required Deliverables Please provide: 1. Complete 3D CAD design. 2. Front, side and top engineering drawings. 3. Detailed dimensions of all components. 4. Internal mechanism and sectional drawings. 5. Electrical wiring diagram. 6. Exploded assembly drawing. 7. Bill of Materials (BOM). 8. Manufacturing-ready PDF and STEP files. ## 7. Important Design Considerations - Keep the design simple and cost-effective. - Easy to manufacture and assemble. - Easy to clean and maintain. - Prevent fish pellets from getting stuck. - Ensure the gate closes properly after every feeding cycle. - Allow adjustment of feeding quantity. - Suitable for humid fish-farming environments. - Use readily available electrical and mechanical components. ## 8. Design Flexibility I am open to changing the existing rotating-disc mechanism if there is a simpler and more reliable alternative. The priority is not to maintain the original mechanism, but to achieve the main objective: **automatically opening and closing the feed outlet at programmed times to dispense a controlled quantity of fish pellets.** Please review my reference images and propose the simplest practical design. I would appreciate your recommendations, quotation and estimated completion time before proceeding.

Project ID: 40821134

About the project

7 proposals

Open for bidding

Remote project

Active 12 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

7 freelancers are bidding on average $148 USD for this job

User Avatar
Flag of UKRAINE

Hello, A reliable fish feeder depends on a practical actuator and control circuit, and my 15+ years in electronic engineering make me well suited to develop this system around your simple 12V timer-controlled concept. I specialise in electronic design, electrical engineering and hardware development for industrial automation and other demanding applications. I can design the electrical arrangement from the 240V programmable timer through the 12V adapter and one-shot relay to the solenoid, including suitable wiring, protection and control details. My experience with embedded systems, industrial electronics and simulation tools such as LTspice supports careful evaluation of the actuator timing, spring-return operation and reliable repeated switching without introducing unnecessary Arduino-based complexity. I can also produce the complete design documentation required for manufacture, including the wiring diagram, component selection and BOM, while coordinating the mechanical requirements for the stainless-steel housing, gate, outlet and support assembly. I would be pleased to turn your existing concept into a clear, cost-conscious and dependable feeder design. Thanks!

User Avatar
Flag of UKRAINE

Hello, Designing a reliable feeder requires both practical mechanical integration and safe, simple control electronics, an area supported by my 10+ years of experience in electronics, industrial automation, actuators, relays, power supplies, and electromechanical product development. I can develop the feeder’s electrical architecture around the 240V timer, 12V adapter, one-shot relay, fuse, wiring, and solenoid actuator, while integrating the spring-return gate and adjustable dispensing mechanism into a manufacturable stainless-steel housing. My experience with motor and actuator integration, electrical protection, control systems, 3D CAD, CNC manufacturing, 3D printing, and product development is directly relevant to producing a design that is practical to assemble, maintain, and manufacture. I can provide the complete 3D CAD assembly, detailed component drawings, sectional and exploded views, wiring diagram, BOM, and manufacturing-ready PDF and STEP documentation. My combined electronics and mechanical product-development background makes me well suited to deliver this simple, cost-effective automatic fish feeder. Thanks!

User Avatar
Flag of UKRAINE

Hello, My electronics engineering and product-development background directly suits the timer-controlled 12V feeder system you need. I can design the electrical architecture around the programmable timer, 12V adapter, one-shot relay, solenoid actuator, fuse, and wiring, while keeping the system simple and avoiding unnecessary Arduino or complex controller requirements. I also provide mechanical CAD and 3D enclosure design, so I can support the feeder housing, gate mechanism, spring return, outlet, support frame, and assembly integration, not just the electronics. My experience with schematic design, component selection, BOM preparation, manufacturing documentation, and hardware prototyping is well matched to your need for a practical, serviceable design with STEP files, engineering drawings, wiring documentation, and a manufacturing-ready BOM. I can turn your existing concept into a clear, cost-conscious feeder design focused on reliable pellet release, adjustable feeding quantity, straightforward assembly, and suitability for a humid environment. I would be glad to take responsibility for developing this complete electromechanical design. Thanks!

User Avatar
Flag of INDIA

Your automatic fish feeder needs both practical mechanical design and a clear electrical arrangement, and my experience with 3D modeling, SolidWorks, AutoCAD, drafting, CATIA and PCB design is directly suited to developing it. I can create the stainless-steel housing, support frame, feed outlet, spring-return gate and internal assembly as detailed 3D models, while preparing front, side, top and sectional engineering drawings. My CAD and drafting background supports manufacturing-ready documentation with accurate dimensions, an exploded assembly and a BOM. I can also document the 240V timer, 12V adapter, one-shot relay, solenoid, fuse and wiring arrangement, supported by my electronics skill. The design can remain simple, adjustable, cleanable and suitable for humid fish-farming conditions, with attention to reliable pellet flow and proper gate closure. I would be pleased to develop this feeder into complete PDF and STEP deliverables and discuss the project further.

User Avatar
Flag of UKRAINE

Hi there, Could you confirm the pellet size range and the target feed amount per cycle? Also, do you want the hopper and outlet sized for one or multiple bottle types? The main challenge is keeping the mechanism simple while avoiding pellet bridging and incomplete closing. A practical path is to design a gravity-fed hopper, a spring-return sliding gate, and a short-duty 12V solenoid controlled by the timer chain you described. One risk is pellet jamming at the outlet, especially with humidity and mixed pellet sizes. That can be reduced with proper chute angle, smooth internal surfaces, a slightly oversized gate clearance, and a spreader shape that keeps flow stable. Can prepare the 3D CAD, drawings, BOM, wiring diagram, and manufacturing files with clear dimensions and section views. The design can be checked for assembly, cleaning access, and repeatable closing before release. Best, Hlib

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅