Kitbash Character Model from Illustration (Modular STL Parts)

$15-25 CAD / hour

Posted 1 minute ago

•

Ends in 6 days

$15-25 CAD / hour

Recreate the attached illustration (stylized female warrior: short brown bob, freckles, blue scarf, slate gray-blue tunic, tan leather belt and bracers, dark trousers, tall boots, longsword) as a kitbash miniature kit: every part is a separate, watertight STL that we assemble virtually in 3D software before printing. Parts share one world position so any combination imports flush together — this is the first kit in a parts library where torsos, boots, belts, weapons, etc. swap freely across future characters. Kitbash Spec (mandatory) - All parts modeled in place on a shared armature: every file imported at origin (0,0,0) aligns into the full figure with zero adjustment. - Seam edges (neck, shoulders, wrists, hips, ankles, waist) must have matching contours — flush, no gaps or steps, with ~0.2–0.3 mm overlap so the digitally assembled figure prints solid. - Standard seam layout will be reused across all future kits — treat it as spec, not preference. - Demonstrate at least one swap at delivery (e.g., barefoot or alternate hand variant). Technical - 32mm heroic scale (feet-to-eye ~35 mm). - Watertight, manifold, walls ≥ 0.5 mm, no non-uniform scaling. - Source: Blender (.blend) preferred, each part a separate named object. - Naming: model_[part]_[L|R].stl. Milestones - Paid test — $10: Model 2–3 parts of our choosing (e.g., one boot, the belt, one hand). Verifies understanding of in-place alignment and seam spec before full commitment. Paid immediately on acceptance. - 25% — Blockout: Low-detail parts cut at all standard seams, shared world position. Approval gate before detailing. - 40% — Full sculpt: All parts per illustration; delivery includes assembly renders (front/back/side) proving flush alignment + one part-swap render. - 20% — Print prep: Pre-supported files, FDM notes, one test-print revision round. - 15% — Final: All STL/3MF, source file, full-figure STL, one-page exploded assembly PDF. How to Apply (read carefully) Briefly answer: - How you keep multiple part files aligned to a shared world position across separate exports. - One shipped kitbash/multi-part miniature project (link to pictures or files). - Estimated hours and hourly rate. - I won't read people applying with AI. Do not lost your time and mine. Terms - Hand-sculpted only. AI-generated meshes (Meshy, Rodin, image-to-3D, etc.) = immediate termination without payment. We check. - No asset-store bases or recycled kits. - Full commercial rights to all files, derivatives, and the seam spec. - One revision round per milestone; scope changes quoted separately.

Project ID: 40820873

About the project

12 proposals

Open for bidding

Remote project

Active 9 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

12 freelancers are bidding on average $20 CAD/hour for this job

User Avatar
Flag of PAKISTAN

Hi, I understand you need a stylized female warrior divided into clean, modular STL parts that align at one shared origin and can swap with future kits. I will build the Character Design as separate named objects in Blender, keeping each seam matched with the required overlap so the virtual Assembly stays flush. My 3D Modelling approach will cover the blockout gate first, then detailing, watertight checks, scale checks, swap proof, and the requested print-ready files. I can also provide the source .blend, full figure, and assembly views. I do not want to claim a project link I cannot verify, but I can show relevant work in chat. My estimate is about 12 hours per week at CAD 25/hour. Can you share the standard seam layout or reference files, and confirm which 2–3 parts you want included in the paid test? Please start a chat and let’s discuss the test parts and seam standard.

User Avatar
Flag of CAMEROON

Hi, I went through your project description and as a experienced 3d Artist with blender I think I am a great fit for this job. I have many years of experience in 3D printing, asset creation, visualisation and 3d animation. You can see my profile: https://www.freelancer.com/u/BLADESTYLE Lets connect in chat so that We discuss further. Thank You

User Avatar
Flag of INDONESIA

Hi, I'm Juli, a 3D design specialist. I've read your job description and I’m confident I can help. I have solid experience with SolidWorks, Fusion 360, and rendering tools like KeyShot. I focus on precision, fast delivery, and clear communication. I understand the requirements of Project and how to approach it effectively. You can also see similar work on my portofolio. Looking forward to hearing from you. Best regards, Juli

User Avatar
Flag of INDIA

Hi! We are experienced in 3D sculpting and printable model design and would be happy to turn your female warrior illustration into a detailed kitbash miniature. We’ll preserve the character’s appearance, outfit, hairstyle, and proportions while creating separate, watertight STL parts for easy virtual assembly. Each component will be carefully designed with clean geometry, suitable connections, and 3D-printing requirements in mind. Happy to review your reference illustration and get started!

User Avatar
Flag of UNITED STATES

Hi, I have developed similar modular 3D assets where separate parts must align precisely for assembly and printing. For this character kit, I will hand-sculpt the warrior in Blender and keep every named part at the same world origin, using the standardized seam contours and controlled 0.2-0.3 mm overlap so swaps import flush without adjustment. I will verify manifold geometry, minimum 0.5 mm wall thickness, heroic 32 mm scale, consistent naming, and non-uniform-scaling issues before exporting the STL and 3MF files. The delivery will include blockout and assembly renders, a demonstrated part swap, print-prepared files, source .blend, full figure, and exploded assembly PDF. I understand that AI-generated meshes and recycled assets are not acceptable. Happy to discuss the paid test and get started. Best regards, Sebastian

User Avatar
Flag of UNITED STATES

Hey there, I'll create a hand-sculpted, modular 32mm warrior miniature with separate watertight STL parts, consistent seam geometry, and accurate alignment. Every component will retain its original world coordinates, allowing seamless assembly and future part swaps. I will use a shared Blender scene and fixed armature, exporting each part without resetting its position. I'll also provide organized source files, assembly renders, a swap demonstration, and print-ready models with verified manifold geometry. Best regards, Daniyal S

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅