Turnkey dual-channel current controller — working tested prototype and complete owned files

$1500-3000 USD

Posted 1 minute ago

•

Ends in 6 days

$1500-3000 USD

Paid on delivery

Seeking an independent embedded hardware/firmware engineer to design, build, program, test and deliver one complete dual-channel low-voltage electrode controller and matching owned manufacturing files. This is original development from written functional requirements; no existing schematic, PCB or firmware. External nominal 12 V supply. Two electrode pairs operate simultaneously in shared water, with current/voltage limits, controlled polarity reversal, retained polarity state, manual timed dosing, simple buttons/selector and actual-current indication. No wireless, app, display or production batch. Engineer must procure and receive the prototype, program and debug it at their own or managed facility, obtain an agreed representative electrode test fixture, perform documented shared-water and enclosed thermal validation, correct agreed-scope design errors including necessary hardware/re-spins/retesting, and ship a verified complete controller with external supply to Toledo, Ohio. Owner will not test or troubleshoot unfinished hardware. Deliver native schematic/PCB CAD, Gerbers/drills, BOM/CPL, full firmware source/build files and binaries, enclosure cutout/DXF drawings, faceplate artwork, complete assembly/wiring documentation, finished-controller BOM and factory test procedure matching the tested unit, with IP ownership and freedom to manufacture elsewhere. Please provide fixed/capped total with labor, prototype hardware, test setup and shipping itemized, timeline, payment/acceptance milestones, relevant power/current-controller work you personally tested, lab arrangements and exceptions. Full detailed Revision C RFQ and numerical acceptance criteria will be supplied privately to suitable bidders. No treatment-efficacy, chemistry, electrode-life or certification studies requested. Reply requested by November 20, 2026, or provide a firm proposal date. Quotation inquiry only; no contract award or paid work is authorized by this posting.

Project ID: 40819541

About the project

18 proposals

Open for bidding

Remote project

Active 4 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

18 freelancers are bidding on average $2,022 USD for this job

User Avatar
Flag of PAKISTAN

Hello, Live Experts combines embedded systems, electrical engineering, circuit design and PCB layout within a multidisciplinary engineering team, making us well suited to deliver your complete dual-channel controller from original requirements through a tested prototype and owned manufacturing package. Our experience spans electronics, automation and real-world hardware systems, supported by skills in product design and signal processing. We can address the controller’s power/current regulation, electrode-channel operation, polarity control, sensing, PCB implementation and embedded firmware as one integrated system. The requested deliverables, native design files, Gerbers, BOM/CPL, firmware source and binaries, wiring documentation, enclosure drawings and factory test documentation, fit our focus on maintainable, production-ready engineering rather than unfinished proof-of-concept work. I would be pleased to submit an itemized fixed or capped proposal covering prototype hardware, representative test setup, validation, any agreed re-spins and shipping, with clear milestones and acceptance criteria. Choose me to develop and document a complete verified controller you retain full freedom to manufacture. Thanks!

User Avatar
Flag of UKRAINE

Hello, Over 15 years in electronic hardware and firmware engineering makes me well suited to develop your dual-channel electrode controller from functional requirements through a tested prototype and complete manufacturing package. I design complex PCBs and embedded systems for consumer, industrial, automotive, medical and aerospace applications, with hands-on capability across Altium Designer, KiCad and Eagle. My embedded experience includes ARM Cortex, STM32, AVR and C/C++, while LTspice and MATLAB/Simulink support circuit analysis and validation. I can cover the controller’s circuit design, PCB layout, firmware, current/voltage control, user inputs, polarity-state handling and documented testing, then provide the native CAD, production outputs, BOM/CPL, source/build files, drawings and assembly documentation required for ownership and future manufacture. I am prepared to submit a fixed or capped, itemized proposal covering prototype hardware, test setup and shipping, with milestones and acceptance terms aligned to the supplied RFQ. Choose me for a complete, professionally engineered hardware-and-firmware deliverable rather than unfinished development work. Thanks!

User Avatar
Flag of UKRAINE

Hello, Your project requires more than a schematic: it needs an owned, tested embedded controller and complete manufacturing documentation. My experience spans circuit design, embedded systems, PCB layout, firmware development, hardware prototyping and testing, supporting development from concept through Gerbers, BOMs and manufacturing-ready files. I can contribute the complete electronics and firmware skill set needed for this low-voltage dual-channel design, including component selection, schematic capture, PCB layout, embedded C/C++ development and prototype debugging. My work with STM32, ESP32, PIC32, dsPIC, MSP430 and other embedded platforms, together with Altium Designer, KiCad, Eagle and EasyEDA, aligns well with a controller requiring buttons, timed operation, current/voltage monitoring and controlled polarity functions. I also provide engineering documentation, enclosure CAD support, BOM preparation and test reports. I would be pleased to provide a clear fixed or capped quotation with itemized prototype, test and shipping costs, milestones, timeline and any exceptions, then deliver a fully documented controller with the native design and firmware files owned by you. Thanks!

User Avatar
Flag of PAKISTAN

Hello, I can help develop your dual-channel electrode controller through a structured hardware and firmware design process. I will focus on a reliable 12V architecture, independent channel control, current and voltage protection, controlled polarity reversal, retained state, and timed dosing. The design will include a carefully engineered PCB, embedded firmware, clear wiring, and organized manufacturing documentation. I will also account for prototype testing, shared-water validation, thermal checks, debugging, and necessary design revisions against your acceptance criteria. All deliverables will be organized for future manufacturing, including native CAD files, Gerbers, BOM, firmware source, DXF drawings, and assembly documentation. I would welcome reviewing your Revision C RFQ before preparing a realistic fixed-price quotation and timeline.

User Avatar
Flag of SERBIA

I can help develop this dual-channel electrode controller from the functional requirements through a tested prototype and complete handoff package. The work would cover embedded firmware, current and voltage control, polarity reversal and state retention, timed dosing, button/selector inputs, actual-current indication, protection logic, and validation of simultaneous operation in shared water. I would structure the engagement around clear acceptance milestones: requirements and architecture, schematic and PCB design, prototype procurement and assembly, firmware implementation, representative electrode-fixture testing, thermal and shared-water validation, correction of agreed-scope issues, and shipment of the verified controller. The final handoff would include native CAD files, manufacturing outputs, BOM/CPL, firmware source and build files, enclosure and faceplate documentation, assembly/wiring instructions, and a factory test procedure matching the validated unit. I understand that the delivered hardware must be independently tested before acceptance and that all agreed prototype, test, and documentation costs should be transparent and capped. IP ownership and manufacturing freedom can be reflected in the final deliverables and acceptance terms. I would be glad to review the Revision C RFQ and align the proposal with its numerical acceptance criteria, milestones, lab arrangements, and shipping requirements. Regards

User Avatar
Flag of UNITED STATES

My strongest relevant capability is debugging complex software systems, supported by senior-level experience across backend development, APIs, testing, and complete software lifecycles. However, this project requires personally demonstrated embedded hardware, PCB design, firmware, laboratory validation, prototype procurement, and manufacturing-file ownership—experience that is not represented in my profile. I can contribute to firmware-adjacent software, test tooling, documentation, and debugging where appropriate, using my background in Python, APIs, Linux, Git, and structured testing. I would not claim the power/current-controller, schematic, PCB, electrode-fixture, or thermal-validation experience required to responsibly quote this turnkey hardware prototype. For this RFQ, I recommend selecting an engineer with verifiable, personally tested embedded power-electronics work and an established hardware lab arrangement.

User Avatar
Flag of UNITED STATES

Hello, My electrical engineering and PCB layout skills are well suited to developing a complete dual-channel controller from functional requirements through production-ready documentation. I can support the circuit design, power distribution, protection, current/voltage sensing, control interfaces, and PCB implementation needed for an external 12 V embedded device. My background also includes electrical design documentation such as one-line and three-line diagrams, service and feeder calculations, panel schedules, and detailed CAD work using AutoCAD, SolidWorks, Solid Edge, Autodesk Inventor, and Fusion 360. This supports the required native design files, wiring documentation, enclosure drawings, BOM, and clearly organized manufacturing package. I would be pleased to contribute as an independent engineer and provide a practical, fully documented hardware design aligned with your acceptance criteria and ownership requirements. Choose me to discuss the quotation, scope, milestones, and deliverables. Thanks!

User Avatar
Flag of UNITED STATES

✅ Hi, there! ✅ You need a turnkey, dual-channel 12V electrode current controller, built from fresh functional requirements, tested in shared water, then shipped to Toledo with complete owned manufacturing files. I’ll handle end-to-end embedded hardware/firmware engineering: schematic + PCB design, firmware, prototype debug, documented thermal/shared-water validation, and delivery of a verified Revision-matched build package. ✔ My deliverables for you will be: - Native schematic + PCB CAD, Gerbers/drills - Firmware source + build pipeline + binaries - BOM/CPL, assembly/wiring documentation, enclosure cutout/DXF + faceplate artwork - Factory test procedure + acceptance-criteria mapping to the tested unit Next step: please share the “Revision C RFQ” acceptance criteria packet, preferred electrode fixture constraints, and any required connector/enclosure size targets for the cutout artwork. Best regards, Michael

User Avatar
Flag of UNITED STATES

Hello, My Electrical Engineering, Circuit Design, Electronics, and PCB Layout skills align directly with developing the dual-channel controller and delivering its owned manufacturing documentation. I can support the design of the controller hardware, PCB, wiring, enclosure-related drawings, BOM, and complete CAD deliverables from the written requirements. As a licensed Professional Engineer, I bring a practical, documentation-focused approach to technical design, including mechanical/product CAD, fabrication drawings, equipment-related engineering, AutoCAD, and DXF deliverables. My experience producing clear packages for fabricators and contractors is relevant to the requested schematic/PCB files, assembly documentation, cutout drawings, faceplate artwork, and factory test documentation. I would be pleased to contribute to a professional, fully documented controller design and provide a clear proposal covering scope, deliverables, milestones, and exceptions. Thanks!

User Avatar
Flag of UNITED STATES

Hello, My background is in structural and civil engineering rather than embedded hardware, so I want to be transparent: I cannot credibly claim the specialized power-electronics, firmware, prototype testing, or current-controller experience this turnkey controller requires. My relevant strength is Electrical Engineering, supported by 10+ years of professional engineering experience producing accurate technical documentation, engineering calculations, coordinated designs, and construction-ready deliverables for residential, commercial, and light-industrial projects. I am experienced with practical design review, revisions, documentation, and field-condition coordination, which could support the documentation side of a broader engineering effort, but I should not present myself as the sole engineer for this RFQ. If you require electrical documentation or engineering coordination alongside an embedded hardware specialist, I would be glad to discuss how my engineering background could contribute. Thanks!

User Avatar
Flag of UNITED STATES

Hi, My electrical engineering and PCB layout background aligns directly with developing a complete low-voltage dual-channel controller from a written specification through a tested prototype and owned manufacturing documentation. I can support the schematic, board layout, product design, electrical integration, and detailed technical documentation required for a buildable controller rather than only producing a concept. My multidisciplinary engineering experience also helps address the complete product system: power distribution, load balancing, equipment layout, thermal considerations, fabrication documentation, and coordinated electrical design. I understand the importance of delivering native design files alongside Gerbers, drills, BOM/CPL data, wiring and assembly documentation, enclosure drawings, firmware deliverables, and a factory test procedure matching the verified unit. I would be pleased to provide a structured fixed or capped quotation with itemized prototype, test-setup, labor, and shipping costs, together with milestones, timeline, acceptance conditions, and clearly stated exceptions. Select me to develop and document a technically sound controller package suitable for manufacture.

User Avatar
Flag of UKRAINE

Hi there, I’m Vadym, an Electronics Engineer with 10+ years in embedded & power systems, designing from functional requirements through firmware, PCB CAD, and verified test procedures. For your dual-channel low-voltage electrode current controller, I’ll architect the dual simultaneous measurement/control loops, implement polarity reversal with retained state, enforce current/voltage limits, and deliver intuitive manual timed dosing with actual-current indication. I’ll own the full build/test/debug cycle at my facility, correct any agreed-scope hardware/design issues through necessary re-spins and re-testing, then package native schematic/PCB CAD, Gerbers/drills, BOM/CPL, full firmware sources/builds/binaries, enclosure cutout/DXF, faceplate artwork, assembly/wiring docs, factory test procedure, and shipping documentation, so you receive a verified unit ready for your acceptance criteria. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Vadym P.

User Avatar
Flag of UNITED STATES

Hi there, Your turnkey dual-channel electrode controller needs more than a PCB, it needs a fully verified, transferable product package. I’m an Embedded Hardware/Firmware Engineer with 12+ years of experience developing and personally testing mixed-signal current-control systems, embedded firmware, PCB assemblies, and production documentation. I can take Revision C from requirements through architecture, schematic/PCB design, firmware, procurement, assembly, debug, and controlled re-spins. I’ll validate simultaneous shared-water operation, current/voltage limits, polarity reversal and retention, timed dosing, actual-current indication, and enclosed thermal performance using an agreed electrode fixture. You’ll receive the tested controller and supply shipped to Toledo, plus native CAD, Gerbers, BOM/CPL, source/build files, enclosure DXFs, artwork, wiring/assembly documents, factory test procedure, milestone plan, and itemized capped quotation, ready for independent manufacture with full IP ownership. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.

User Avatar
Flag of BULGARIA

Hi, Your dual-channel electrode controller needs to arrive in Toledo as a fully assembled, programmed, tested unit, with complete manufacturing files and ownership transferred to you. The critical challenge is ensuring both electrode pairs operate simultaneously in shared water while maintaining independent current limits, controlled polarity reversal and reliable thermal performance. My approach would be to establish the technical requirements, coordinate hardware and firmware development with a qualified electronics engineer, then manage prototype testing, documentation and final delivery against your acceptance criteria. My background in Python, Testing/QA and project management supports structured development and clear progress tracking. I can start now, with an estimated 6–8 week delivery, subject to the Revision C RFQ and engineering scope. Do you already have a preferred electrode test fixture and target current range? Best regards, kolevk

User Avatar
Flag of UNITED STATES

Hello, I am Dominique, and I am excited to express my interest in your project for developing a dual-channel low-voltage electrode controller. With a robust background in electronics, circuit design, and embedded systems, I am well-equipped to handle the intricacies of this project from inception to completion. Your project requires creating a turnkey solution from scratch, and I understand the importance of delivering a fully functional, tested prototype along with comprehensive manufacturing files. My experience in designing and debugging embedded hardware ensures that I can manage the entire lifecycle of this project, including procuring materials, constructing and testing prototypes, and addressing any design challenges that arise. I have successfully executed similar projects involving precise current control and embedded firmware development, and I am familiar with the nuances of working with electrode systems and managing polarity and dosing. My approach will include rigorous testing, including shared-water and thermal validation, to ensure the controller meets all specified requirements. I am also committed to providing thorough documentation and IP ownership as you have outlined. I am confident in my ability to deliver a reliable and efficient solution that meets your needs and surpasses your expectations. I look forward to the opportunity to discuss how I can contribute to the success of your project. Best regards, Dominique

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅