Factory-Ready Simple PCB Layoutr

$30-250 USD

Posted 1 minute ago

•

Ends in 6 days

$30-250 USD

Paid on delivery

I already have a complete circuit diagram and parts list for a small electronic device; what I need now is a production-ready PCB layout that a standard board house can fabricate without tweaks. The schematic is locked, so the focus is on translating it into a compact, reliable board that meets typical manufacturing design-rule checks. You’re free to work in KiCad, Altium, or Eagle—whichever lets you move fastest and still hand over editable source files. The finished files must sail through online Gerber checkers from JLCPCB, PCBWay, or similar plants with no clearance or drill-size errors. Deliverables • Native project file (KiCad, Altium, or Eagle) • Clean Gerber and drill files, ODB++ if available • Pick-and-place, assembly drawing, and updated BOM Acceptance criteria: DRC passes at 5/5 mil or tighter, all layers align in the board-house preview, and the enclosure footprint I’ll share is respected. A first draft within one week would be ideal so we have time for a quick revision round before sign-off. If that timeline works for you, let’s get this board on the factory floor.

Project ID: 40818633

About the project

4 proposals

Open for bidding

Remote project

Active 7 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

4 freelancers are bidding on average $161 USD for this job

User Avatar
Flag of PAKISTAN

Hi, I understand you already have the locked schematic and parts list, and need a compact PCB layout ready for fabrication without board-house fixes. I will place and route the board around your enclosure footprint, check clearances and drill sizes, run DRC at 5/5 mil or tighter, and verify the layers in a JLCPCB or PCBWay preview. I will provide the editable native project, Gerber and drill files, ODB++ where supported, pick-and-place data, assembly drawing, and updated BOM. I can send the first draft within one week and handle a quick revision round before sign-off. My work will focus on reliable Electronics design using Electrical Engineering checks and practical Engineering for manufacture. Does the enclosure file include mounting-hole locations and height limits, and which board-house stackup should I use for the 5/5 mil DRC target? Please share the schematic, BOM, enclosure file, board-house stackup, and preferred CAD tool. Start chat and let’s discuss the board details.

User Avatar
Flag of UKRAINE

Hello, Turning a locked schematic into a factory-ready PCB is central to my work as an Electronics & PCB Design Engineer with 10+ years of experience in hardware development, PCB layout, DFM, prototyping, testing, and manufacturing documentation. I can translate your existing circuit and parts list into a compact, reliable board while respecting the enclosure footprint and fabrication constraints. My background covers analog and digital electronics, multilayer PCB design, component and footprint libraries, design optimization, and small-batch electronics production. This supports the complete handover you need: editable native design files, clean Gerbers and drill data, assembly documentation, pick-and-place files, and an updated BOM. My experience with manufacturing design and practical CNC/manufacturing environments also helps keep the layout suitable for standard board-house production rather than requiring workshop corrections. I am ready to take responsibility for a clean, fabrication-focused PCB layout and the associated production files, with a first draft targeted within your requested timeframe. Choose me to move your board confidently toward manufacturing. Thanks!

User Avatar
Flag of UKRAINE

Hello, With over 15 years in electronic engineering and extensive experience creating complex PCB layouts for production, I can turn your locked schematic and parts list into a compact, reliable, factory-ready board. I work fluently with Altium Designer, KiCad, and Eagle, allowing me to provide the editable native project files that best suit your workflow. My background spans consumer electronics, industrial automation, automotive, medical devices, and aerospace, where precision, reliability, and industry-standard design practices are essential. Alongside the PCB layout, my electronics and circuit-design experience supports accurate component placement, routing, manufacturing outputs, assembly documentation, and BOM updates. I will ensure the deliverables are prepared for board-house review, including Gerbers, drill files, pick-and-place data, and assembly drawings, while respecting the enclosure footprint and manufacturing constraints. I am ready to create your production-ready PCB and provide a strong first draft within your desired timeline. Choose me to move your design confidently toward fabrication. Thanks!

User Avatar
Flag of POLAND

✅ Hi Mate✅ , Good morning! I am professional engineer with skills including Circuit Design, Electrical Engineering, Manufacturing Design, Electronics, Rapid Prototyping, Documentation, Simulation, PCB Layout, Product Design and Embedded Systems. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅