NJ Architect For 800-Sq-Ft Addition

$30-250 USD

Posted 1 minute ago

•

Ends in 6 days

$30-250 USD

Paid on delivery

I’m adding an 800 sq ft, single-story extension on one side of my home. The goal is a simple, cost-effective layout with two new bedrooms and one full bath that blends cleanly with the existing structure while meeting every local code in New Jersey. Here’s what I need from you, as a currently licensed NJ architect: • Full architectural construction set—site plan, dimensioned floor plan, roof plan, exterior elevations, building sections, door and window schedules, and clear structural notes, all prepared in AutoCAD or comparable CAD software so updates are easy. • Integrated MEP package—lighting and receptacle layout with circuiting and panel schedule, plumbing supply/drain/vent diagrams, and HVAC sizing with duct runs sized for energy-efficient performance. • Permit-ready delivery—signed and sealed PDFs plus two hard-copy sets, along with any township forms or checklists completed so I can walk them straight to the counter. I’ll provide the current survey, site photographs, and the municipality’s submission checklist at kickoff. Please reply with your active New Jersey license number and a realistic timeline from receiving my materials to issuing the stamped set.

Project ID: 40818518

About the project

10 proposals

Open for bidding

Remote project

Active 15 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

10 freelancers are bidding on average $143 USD for this job

User Avatar
Flag of CANADA

Hello, I can produce the complete AutoCAD set for the addition, including site plan, dimensioned floor plan, roof plan, elevations, sections, door and window schedules, and structural notes tied to your existing walls and roof. I'll also lay out lighting, receptacle circuiting, plumbing diagrams, and a preliminary HVAC zoning plan, then hand off the editable files to your NJ-licensed architect of record for review and sealing, since I don't hold a New Jersey license to stamp drawings myself. Just a couple of quick questions: 1. Do you have as-built drawings or framing details for the existing house, and which direction do the roof rafters or joists run where the addition will connect? 2. Which township are you submitting to, and should the exterior match the current siding, trim, and roof pitch exactly or use a contemporary finish? Looking forward to collaborating on this. Portfolio: https://www.freelancer.com/u/anthonym873

User Avatar
Flag of SERBIA

Hello, My AutoCAD and building-architecture skills can support the drafting of a clear, editable construction set for your 800 sq ft addition, including the floor plan, elevations, sections, roof plan, schedules, and coordinated CAD documentation. My background as a senior mechanical engineer gives me strong experience producing precise technical designs, coordinating systems, and creating practical, cost-conscious solutions. I also work with CAD/CAM, AutoCAD, 3D modeling, manufacturing processes, and mechanical systems optimization, useful strengths for developing accurate layouts and clear engineering documentation. However, my profile does not indicate an active New Jersey architect license or authorization to provide signed and sealed architectural, structural, or MEP permit documents. I therefore cannot honestly provide the NJ license number or promise a permit-ready stamped set. I can contribute as an AutoCAD/CAD design professional, while a currently licensed New Jersey architect or engineer handles code certification, sealing, and submission requirements. Thanks!

User Avatar
Flag of PAKISTAN

Hi Dear, I summarize all the details and provide you with clear work . I am a professional architect designer & 3d visualizer with 8 years of experience. you looking for NJ Architect For 800-Sq-Ft Addition I have worked on several similar projects and can deliver quality of work to tight deadlines. You can see an example of one of those projects in my portfolio here: https://www.freelancer.com/u/Syedjunni I can generally compile up to 2 projects per day. with team work I'm interested to hear more about the project If you award me the project I'd be very happy to discuss this further and get started for you as soon as possible. Thanks! Syed

User Avatar
Flag of UNITED STATES

Hi, I am a licensed Architect with 15+ years of experience in residential additions, architectural design, and permit-ready construction documents in New Jersey. I hold an active NJ architectural license. I understand you need complete construction drawings for an 800 sq. ft. single-story home addition with two bedrooms and a full bathroom, designed to integrate with the existing structure. I will prepare site plans, floor plans, elevations, roof plans, sections, structural details, and door/window schedules, along with coordinated electrical, plumbing, and HVAC drawings. All designs will follow the NJ Uniform Construction Code, applicable energy codes, and local zoning requirements. I am ready to get started on your project. Please share your survey, site photos, and township checklist. NJ License No.: [Insert License Number] Best regards, Steven

User Avatar
Flag of UNITED STATES

Hi there, Your 800-sq-ft New Jersey addition needs a practical two-bedroom, one-bath layout that feels original to the home and moves smoothly through township review. As a licensed Architect with 12+ years of residential design and permit-documentation experience, I can develop a coordinated, cost-conscious construction set covering the site and floor plans, roof, elevations, sections, schedules, and structural notes in CAD. I will also integrate electrical, plumbing, and HVAC documentation, checking fixture locations, circuiting, drainage, equipment sizing, duct routing, energy performance, and coordination with the existing structure. Using your survey, photographs, and municipal checklist, I’ll organize the signed-and-sealed permit package, forms, PDFs, and hard-copy sets for a clear submission. My active New Jersey license number and a realistic issuance schedule will be confirmed before engagement based on the township and required engineering coordination. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.

User Avatar
Flag of PAKISTAN

Good Day, I've carefully reviewed your project "NJ Architect For 800-Sq-Ft Addition", and I can already see the potential to turn your vision into something truly exceptional! At Canvas & Core, we bring 9+ years of creative expertise, attention to detail, and a passion for outstanding design. You can Expect Premium-Quality Results, Smooth Communication and Unlimited Revisions until every detail meets your expectations. Your vision deserves the Best. Let's make it happen! Best Regards, Canvas & Core

User Avatar
Flag of UNITED STATES

Hi, I understand you need a permit-ready design for an 800-square-foot, single-story New Jersey home addition with two bedrooms, one full bath, coordinated architectural and MEP plans, and signed and sealed deliverables. I can develop the coordinated CAD construction set from your survey, photographs, and township checklist, including plans, elevations, sections, schedules, structural notes, electrical, plumbing, and HVAC documentation. I will provide a realistic schedule after reviewing the kickoff materials and confirm active New Jersey licensure details before engagement; I hope we can talk together and start immediately. Best regards. Richard

User Avatar
Flag of UNITED STATES

Hello, My 10+ years of structural and civil engineering experience include residential home additions, permit engineering, foundations, framing, roof systems, and detailed construction documents, directly matching the technical needs of your 800-sq-ft New Jersey extension. I can prepare coordinated AutoCAD documentation for the addition, including structural plans and details, foundation and framing design, roof load-path information, site and drainage considerations, and architectural/structural coordination. My experience with single-family homes, ADUs, remodels, and permit plan review supports practical, buildable documents designed for smooth municipal review. I can also coordinate the structural information with the architectural and MEP portions of the package. Please note that my profile identifies me as an engineer rather than a currently licensed New Jersey architect, and it does not provide an NJ architect license number. I would be glad to contribute the structural and civil engineering scope and coordinate with the required NJ architect or MEP professionals for a complete stamped submission. Thanks!

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅