Fix Curved Implant Plate Geometry

$250-750 USD

$250-750 USD

Paid on delivery

Title: SolidWorks Expert Needed – Fix Hole/Lobe Geometry on Curved Medical Implant Plate (Design-Table Driven) Description: I’m looking for an experienced SolidWorks modeler (surface modeling + design tables) to fix the geometry on a curved titanium bone plate that comes in several lengths. The part A curved plate (lordotic curve along its length, concave underside across its width), built from a lofted blank. The outline is cut straight down (vertical walls), matching how it will be 3-axis machined. Screw holes sit in rounded “lobes” at each end and are made with revolved cuts at a compound angle (cranial-caudal and medial-lateral). The part is driven by configurations / a design table: hole spacing changes between sizes, while the hole geometry, screw angles and curve stay the same. The problem The screw seat lands in the correct location on every size. But the wall between the counterbore and the outer edge of the lobe at the top surface changes thickness between sizes. On longer plates it gets noticeably thinner, because the holes sit on a steeper part of the curve. I need the hole-to-lobe relationship to be consistent across every size while keeping vertical outline walls. What I’ve tried Anchoring the hole at a reference point projected onto an offset of the top surface (seat depth). The seat tracks correctly, but the top wall still varies. Surface → Trim → Thicken (walls normal to the surface). This fixes it, but it doesn’t match the vertical-wall machining. Reviewed a reference model that uses offset/extended surfaces, vertical lobe bosses trimmed to the surfaces, and screw angles built from fixed anatomical axes (coronal / cranial-caudal). I want a similar, robust approach. Deliverables A corrected, fully defined SolidWorks part (SW 2024) with a clean feature tree, where every configuration rebuilds without errors and the hole-to-lobe wall is consistent on all sizes. Screw angles defined clearly and editable from named dimensions (cranial-caudal and medial-lateral). A short written or video explanation of the method so I can maintain and extend it (additional sizes, multi-level plates). Optional: a recommended dimensioning scheme for the drawing (hole position and angles on a curved part). Requirements Strong SolidWorks experience with surfacing, reference geometry, equations and design tables. Medical device or orthopedic implant modeling experience strongly preferred. Understanding of how curved parts are machined (3-axis vs. 3+2) is a plus. To apply, please include A brief description of how you’d approach this problem. Your estimated timeline and fixed price.

Project ID: 40817272

About the project

45 proposals

Remote project

Active 5 mins ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

45 freelancers are bidding on average $341 USD for this job

User Avatar
Flag of INDIA

My 9 years of professional mechanical design experience, focused on SolidWorks, align directly with your curved implant plate and configuration-driven geometry requirements. I can work with 3D CAD, surface-based modeling, fully defined parts, and design-table-controlled variations while preserving the vertical outline walls required for 3-axis machining. I will focus on creating a robust relationship between the lobe, counterbore, curved top surface, and screw-seat location so the wall thickness remains consistent across all plate lengths. I can also define the cranial-caudal and medial-lateral screw angles with clear, editable dimensions and maintain a clean feature tree that rebuilds reliably across configurations. My mechanical design background supports a practical modeling solution rather than a surface-only result that conflicts with manufacturing intent. I can provide the corrected SolidWorks 2024 part together with a concise written or video explanation for future sizes and modifications. I would be glad to discuss the fixed scope, timeline, and price and take responsibility for delivering a maintainable model.

User Avatar
Flag of PAKISTAN

Hello, Our SolidWorks and mechanical engineering experience is well suited to resolving configuration-driven geometry problems in manufacturable 3D CAD parts. Live Experts has over a decade of technical delivery experience across engineering and manufacturing, with strong skills in SolidWorks, 3D modelling, CAD/CAM and mechanical design. For your curved implant plate, I can work directly with the lofted blank, offset and trimmed surfaces, vertical lobe geometry, revolved compound-angle cuts, equations and design-table configurations. The focus will be on preserving the required 3-axis machining walls while establishing a consistent hole-to-lobe relationship across every plate length. I will also keep the cranial-caudal and medial-lateral angles clearly editable through named dimensions and provide a clean, fully defined feature tree with configuration rebuilds checked in SolidWorks 2024. I can deliver the corrected part together with a concise written or video explanation covering maintenance, additional sizes and suitable drawing dimensions. I would be glad to apply my SolidWorks and mechanical CAD expertise to make this model robust and production-ready. Thanks!

User Avatar
Flag of TURKEY

Hello; We are interested in your Fix Curved Implant Plate Geometry project. We are a professional team of expert architects from all over the world. Our team offers the highest quality and most effective projects with over 14 years of experience and works with a focus on 100% customer satisfaction. When you choose us, you will have a final delivery that exceeds your expectations. We look forward to working with you! Take a look at our past work on our portfolio: https://www.freelancer.com/u/worldarcpart Kind Regards WORLD ARCHITECTURE PARTNERS

User Avatar
Flag of INDIA

Hello, Fixing the hole-to-lobe relationship on a curved, design-table-driven implant plate is exactly the kind of SolidWorks surfacing problem I enjoy solving. I’d rebuild the critical geometry using controlled reference planes/axes, offset or extended surfaces where needed, and fully driven equations so the screw seat, lobe edge, and wall thickness stay consistent across every configuration while preserving vertical outline walls. My approach is to isolate the governing anatomy and machining constraints first, then clean up the feature order so the hole geometry is referenced from stable construction geometry rather than the changing top curvature. I’ll verify every configuration rebuilds cleanly, keep the feature tree maintainable, and document the method clearly in a short video or written walkthrough for future sizes and variants. Please have a look at our Freelancer portfolio through the links given below. https://www.freelancer.com/u/CreativeDesign50 Could you share the current SolidWorks file and the number of configurations involved? Best regards Kirandeep K.

User Avatar
Flag of MOROCCO

Hello I can deliver a fully defined SolidWorks part with consistent hole‑lobe geometry across all configurations. I am an experienced CAD/CAM designer specializing in CATIA, SolidWorks, and AutoCAD, with over 10 years of professional freelance and teaching experience. I excel at transforming 2D plans into precise, detailed 3D models, creating accurate assemblies, parts, and visualizations ready for manufacturing or prototyping. With my expertise in Part Design, Generative Shape Design (GSD), Drafting, and Assembly Design, I deliver high-quality, production-ready models in STL, STEP, OBJ, or FBX formats. I am detail-oriented, efficient, and committed to exceeding client expectations. You can view my portfolio here: https://www.fr.freelancer.com/u/mouniridmed Best regards, Mounir

User Avatar
Flag of UNITED KINGDOM

The issue appears to be that the screw seat is positioned correctly, but its relationship to the lobe's vertical outer wall changes as the plate curvature and hole spacing vary between configurations. Hello, I'd approach this by separating the hole-position logic from the lobe-boundary geometry rather than relying on a projected seat reference alone. I'd investigate a surface-driven feature strategy using offset and extended reference surfaces, vertically defined lobe geometry and controlled trimming, while keeping the screw axes tied to clearly named cranial-caudal and medial-lateral dimensions. The goal would be a consistent counterbore-to-edge wall relationship without compromising the vertical machining walls. I'd also review the existing equations and design table so the solution rebuilds reliably across every plate length. The feature tree would remain organised and editable, with a short explanation documenting the geometry strategy and how to extend it to additional configurations. Could you share the current SolidWorks 2024 part and design table so I can assess how the existing features and references are structured? Best Regards, Muskan.

User Avatar
Flag of PAKISTAN

I understand you need to resolve complex geometry issues within your design-table driven SolidWorks model for a curved medical implant plate. My experience with intricate surface modeling and parametric design, particularly in medical device applications, aligns perfectly with the challenges you've described, including the precise placement of features like the revolved-cut screw holes within the lobe structures. My approach will involve a thorough review of your existing SolidWorks files to diagnose the root cause of the geometry errors. I will then leverage advanced surfacing techniques and potentially rebuild key features using robust, stable methods to ensure parametric integrity. This will include meticulous attention to curvature continuity and the precise implementation of your design table logic to maintain functionality across all plate lengths. Could you clarify if the current issues stem from specific design table configurations or inherent limitations in the lofting strategy? I'm available for a brief call to discuss your project in more detail and outline how I can efficiently deliver a fully functional and stable SolidWorks model.

User Avatar
Flag of PAKISTAN

Hello, You need the curved plate’s hole-to-lobe wall to stay consistent across design-table sizes, without changing the vertical outline walls needed for machining. The tricky part is locating each counterbore relative to the lobe on the changing curved surface, rather than only tracking the screw seat. A surface-normal offset can solve one issue but conflict with the vertical-wall machining requirement. I’d review the configurations, then use offset or extended surfaces, named axes, and equations to control the lobes and screw angles. I’ve handled similar configurable SolidWorks geometry involving curved surfaces and references across sizes. Please share a few details to help scope the work: 1. Can you provide the SW 2024 part and design table? 2. Are screw angles specified from anatomical axes, or should they follow the reference model? Once I’ve reviewed the part, I can confirm the scope, timeline, and fixed-price estimate, then document the method for future sizes. I look forward to hearing from you. Kind regards, Muqadas Shahzadi

User Avatar
Flag of UZBEKISTAN

Hi, good day! I would like to apply for this project. I can help correct your curved implant plate geometry in SolidWorks 2024 using robust surface modeling, reference geometry, equations, and design-table-driven configurations. I’ll focus on maintaining consistent hole-to-lobe wall thickness across all plate sizes while preserving vertical machining walls and keeping the screw angles fully editable through named dimensions. I’ll also ensure a clean feature tree, error-free configuration rebuilds, and provide a clear explanation of the modeling approach for future modifications. Best,

User Avatar
Flag of PAKISTAN

I'LL FIX YOUR SOLIDWORKS GEOMETRY Hi There, I understand that you need to fix the hole-to-lobe geometry on your curved titanium bone plate to ensure consistency across various sizes while maintaining design integrity. This requires a robust solution that balances precision and manufacturability. As a logo and brand designer with 10+ years of experience in CAD/CAM, I specialize in SolidWorks modeling, particularly in surface modeling and design tables for complex geometries. I ensure original concepts are maintained and provide revisions until you are satisfied, delivering all source files in the required formats. You can view my portfolio here: https://www.freelancer.com/u/Shahmeer9090 Let’s discuss your preferred dimensions, design approach, and timeline so we can achieve the best solution together. Thanks, Shahmeer

User Avatar
Flag of PAKISTAN

Hi, I’ve read your requirements carefully and can fix this SolidWorks geometry with precision. I work with surfacing, reference geometry, equations, and design tables to keep every configuration rebuilding cleanly. My approach would be to study the current feature tree, identify why the hole-to-lobe wall shifts across sizes, and rebuild that relationship using stable references from the anatomical axes and offset/extended surfaces where needed. I’ll keep the vertical outline walls for machining, preserve the screw angles as editable named dimensions, and make sure every plate length rebuilds consistently. With 3+ years of experience in 3D Design, 3D Modelling, and 3D CAD, I’ve handled complex geometry that needs both design intent and manufacturability. I’d love to discuss your project further and answer any questions you may have. Feel free to reach out so we can refine the details together.

User Avatar
Flag of SOUTH AFRICA

Hi there, we might be new to the platform but I'd love to share some relevant examples. Your request for a SolidWorks expert to fix the geometry on a curved medical implant plate sounds right up our alley, and we would love to exceed your expectations. We understand that you need a consistent hole-to-lobe relationship across all sizes while maintaining vertical outline walls. Our approach involves leveraging advanced surfacing techniques and design tables to ensure the wall thickness remains uniform. With our proven track record—multiple 5-star reviews on similar projects and ranking in the top 1 percent among 75 million users—we are confident we can deliver a polished, fully defined SolidWorks part that meets your specifications. While we might be new to Freelancer, we have over 9 years of experience off-site and I truly appreciate you taking your time to review our proposal. I would love to discuss this project more. Kind regards, Trichelle

User Avatar
Flag of PAKISTAN

The wall variation comes from tying the lobe to a projected point on a curved surface rather than to fixed anatomical axes. I'd rebuild the lobes as vertical bosses trimmed to offset surfaces, with screw angles driven by named dimensions so every configuration rebuilds consistently. I can walk you through the approach before starting. Regards, Muhammad Taha

User Avatar
Flag of PAKISTAN

SolidWorks product design and mechanical CAD are central to my work, including 3D parts, manufacturing-ready drawings, GD&T, tolerances and sections. That makes me well suited to correct this curved implant plate while respecting the difference between surface-normal geometry and the vertical walls required for 3-axis machining. I can work with the existing lofted geometry, reference surfaces, compound-angle revolved cuts, equations and configurations/design-table logic to make the hole-to-lobe relationship consistent across plate lengths. My SolidWorks background also supports a clean, fully defined feature tree with named, editable dimensions for the cranial-caudal and medial-lateral screw angles, plus reliable rebuilds for each configuration. I will provide the corrected native SLDPRT and a concise written explanation of the modeling logic so future sizes can be maintained. I would be glad to apply my CAD/CAM and mechanical modeling experience to this implant component and deliver a robust, manufacture-aware SolidWorks solution.

User Avatar
Flag of PAKISTAN

Respected Client, I've carefully reviewed your project "Fix Curved Implant Plate Geometry", and I can already see the potential to turn your vision into something truly exceptional! At Canvas & Core, we bring 9+ years of creative expertise, attention to detail, and a passion for outstanding design. You can Expect Premium-Quality Results, Smooth Communication and Unlimited Revisions until every detail meets your expectations. Your vision deserves the Best. Let's make it happen! Best Regards, Canvas & Core

User Avatar
Flag of UNITED STATES

Hello, My mechanical engineering and 3D CAD background enables me to work carefully with complex 3D geometry and produce practical, manufacturable models. Your curved implant plate requires particular attention to the relationship between the curved surfaces, lobe outline, counterbore, and angled screw axis, and I can apply that engineering focus to develop a robust model across the design-table configurations. I am experienced in 3D modelling, CAD/CAM, and advanced engineering analysis, with a strong focus on accurate geometry and constructible designs. I will deliver a clean, fully defined SolidWorks part with editable dimensions and a feature structure suited to maintaining consistent hole-to-lobe geometry while preserving the required vertical machining walls. I can also provide clear documentation of the final geometry and dimensioning logic for future size variations. I would welcome the opportunity to apply my mechanical CAD expertise to this implant plate and deliver a dependable, maintainable model. Thanks!

User Avatar
Flag of SLOVAKIA

Hello, I’m Kristián Lauko, with 10+ years of experience in 3D Modelling and 3D Rendering, and strong SolidWorks work in surfacing, reference geometry, equations, and design-table driven parts. I understand the issue: the seat stays correct, but the top wall thickness changes as the plate length changes because the hole/lobe relationship shifts along the curve. I would rebuild the geometry with a stable reference scheme using controlled surfaces, fixed anatomical axes, and a consistent lobe definition so every configuration rebuilds cleanly while keeping the vertical machining walls. I have extensive experience creating robust parametric models with clean feature trees, especially where geometry must remain editable across multiple configurations and sizes. I would ensure effective communication throughout the project and would be glad to discuss the model structure and maintainability once you share the file. I’m excited to hear from you. Thanks, Kristián Lauko

User Avatar
Flag of UNITED STATES

Hello, My SolidWorks and mechanical engineering background is well suited to resolving this type of configuration-driven curved-part geometry. I work with 3D CAD, 3D modelling, CAD/CAM, and SolidWorks, with an engineering focus on accurate, fabrication-ready mechanical and product CAD. For your implant plate, I can focus on the relationship between the curved top surface, vertical lobe walls, counterbore geometry, and compound screw axes rather than treating the hole as an isolated cut. My approach would use robust reference geometry, named dimensions, equations, and configuration/design-table logic so the hole-to-lobe wall remains controlled as spacing and plate length change. I can also provide a clean feature tree and explain the editable geometry clearly for future sizes and revisions. My broader experience producing detailed CAD, fabrication drawings, and specialty engineering documentation supports the precision and maintainability this model requires. I would be glad to review the existing SolidWorks part and deliver the corrected SW 2024 model, configuration validation, and concise maintenance explanation. The final timeline and fixed price can be established from the model complexity and number of configurations. Thanks!

User Avatar
Flag of UNITED STATES

Hello, My mechanical engineering and CAD/CAM background is well suited to correcting the hole-to-lobe geometry while preserving the vertical walls required for 3-axis machining. I can work within the existing SolidWorks part structure and focus on maintaining consistent wall thickness across the design-table-driven configurations. I am experienced in producing accurate, practical CAD geometry and organized engineering documentation, with strong attention to fully defined features, editable dimensions, and clean model structure. I can apply a robust surface and reference-geometry solution, keep the cranial-caudal and medial-lateral screw angles clearly controlled, and verify that each configuration rebuilds correctly without errors. I will provide the corrected SW 2024 part together with a concise explanation of the modeling logic and a maintainable dimensioning approach. I estimate 3-5 days, with a fixed price of $350, and would be glad to take responsibility for resolving this geometry cleanly. Thanks!

User Avatar
Flag of UNITED STATES

My mechanical engineering background and 9 years of experience producing detailed, coordinated design documentation make me well suited to resolving a precision-driven implant plate geometry issue. I work extensively with structural and mechanical design concepts, including curved and irregular components, dimensional coordination, technical detailing, and practical manufacturing considerations. I can focus on the relationship between the curved plate surface, vertical lobe walls, counterbore geometry, and configuration-driven hole spacing, while keeping the model organized and maintainable. My experience coordinating complex design changes and identifying conflicts early supports a clean, fully defined SolidWorks model with clearly documented dimensions and editable design intent. I can also provide concise technical documentation explaining the final geometry and recommended drawing dimensions. I would be glad to apply my mechanical engineering and detailed modeling experience to this SolidWorks correction and deliver an organized, maintainable result.

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅