Touch-Screen Arduino Nano Programmer
₹1500-12500 INR
Posted 1 minute ago
•
Ends in 6 days
₹1500-12500 INR
Paid on delivery
I need a complete solution that turns an Arduino Nano into a stand-alone programmer for other Arduino-compatible boards that use ATmega chips. A DWIN touch display will act as the user interface. What the interface must do • Let the user pick the target board, start the flashing process, and monitor a live progress bar with success/fail feedback. • Offer a simple settings menu so I can tweak items such as fuse choices, verify-after-write, and any other parameters you think are essential. System constraints • The program file to be flashed lives inside the Nano itself; no SD card or external PC connection will be available at run-time. • Only ATmega-based Arduino boards need to be supported, so please focus the bootloader / HEX handling code accordingly. • Everything should fit comfortably in the Nano’s memory, so code size optimisation matters. Required deliverables 1. Arduino sketch (.ino) fully commented. 2. DWIN HMI project file with all graphics and touch areas defined. 3. Wiring diagram and a concise setup guide so I can reproduce the build. 4. Short test routine or video proving a board is successfully flashed and verified. Acceptance criteria The system must reliably program at least an Arduino Uno and Nano, show correct progress and final result on the display, and let me change a setting, reboot, and flash again without errors. If you have prior experience with DWIN displays, USBasp-style programming, or bootloader handling on ATmega MCUs, I’d love to see examples.
Project ID: 40816468
About the project
1 proposal
Open for bidding
Remote project
Active 40 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
1 freelancer is bidding on average ₹3,500 INR for this job


Building a stand-alone ATmega programmer requires both firmware and hardware interfacing, and my embedded systems experience with ATmega, Arduino, electronics, microcontrollers, and C programming directly matches this project. I can develop the Nano-based programming solution with a DWIN touch interface for board selection, flashing control, progress reporting, verification status, and configurable fuse/programming options. My experience across Arduino and embedded hardware/software integration is well suited to keeping the implementation practical and memory-conscious while supporting Uno and Nano targets. I can provide the fully commented .ino sketch, DWIN HMI project, wiring diagram, setup guide, and a concise test demonstration covering successful flashing, verification, settings persistence after reboot, and repeat programming. I am ready to deliver a complete, reproducible solution focused on reliable ATmega bootloader and HEX programming. Choose me to turn this programmer concept into a working embedded tool.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗