EasyEDA Vehicle Tracker Board Design
€30-250 EUR
Posted 1 minute ago
•
Ends in 6 days
€30-250 EUR
Paid on delivery
I need a fully-ready EasyEDA project for a compact ESP32-WROOM-32E based board that will perform vehicle tracking and telemetry. The board must accept vehicle power, expose a CAN bus via the SN65HVD230 transceiver, capture motion with an ADXL345, obtain location through an external GPS antenna, and upload all data over the mobile network using the SIM7000G LTE-Cat-M/NB-IoT module. All circuitry, footprints, and routing have to be prepared so I can send the files straight to JLCPCB for assembly. That means the EasyEDA workspace should already include a clean schematic, a routed PCB, a JLC-compatible BOM, and the corresponding CPL/placement file. Please keep the component library limited to parts that JLCPCB can source from its basic or extended catalogue; if a footprint is custom, include it inside the project. Physical requirements • Single automotive power input (9–32 V tolerance) with reverse-polarity and transient protection. • [login to view URL] pads for both GPS and LTE antennas. • A keyed pin header for vehicle harness connections: power, CAN-H/L, and a spare UART. • Board size and exact shape are flexible but should remain small enough to fit in a generic plastic enclosure. Deliverables 1. EasyEDA project archive (schematic + PCB). 2. JLC-formatted BOM and CPL files. 3. Standard Gerbers generated from EasyEDA. I will review by importing the project into EasyEDA, running JLC’s assembly preview, and checking that the CAN, GPS, motion, and cellular sections correspond to the functional blocks above.
Project ID: 40816425
About the project
9 proposals
Open for bidding
Remote project
Active 3 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
9 freelancers are bidding on average €171 EUR for this job


Hi, I understand you need a complete EasyEDA board for vehicle tracking, with ESP32-WROOM-32E, CAN through SN65HVD230, ADXL345 motion sensing, GPS, SIM7000G, and protected 9-32 V vehicle input. I will create the schematic, compact routed PCB, JLCPCB-ready BOM and CPL, custom footprints where needed, and Gerbers. I will also check antenna connections, harness pinout, power protection, grounding, clearances, and assembly availability so the project imports cleanly and passes the JLC assembly preview. My background in Electronics, Microcontroller work, Electrical Engineering, and Engineering fits this board well. Do you already have preferred automotive protection parts, antenna connectors, and enclosure dimensions, or should I select JLCPCB-available options for these? Please start the chat and let’s discuss the enclosure limits, connector details, and preferred parts.


Hello, Designing a manufacturing-ready ESP32 IoT board is central to my work as an electronics engineer specializing in PCB design, embedded hardware, and product development. I work with EasyEDA and can produce the complete schematic, routed PCB, Gerbers, BOM, and manufacturing documentation required for JLCPCB assembly. My experience with ESP32 embedded systems, RF and wireless communication, sensor integration, and IoT hardware directly matches the proposed vehicle tracker. I can incorporate the SN65HVD230 CAN interface, ADXL345 motion sensing, SIM7000G cellular connectivity, external GPS and LTE antenna connections, vehicle power protection for the specified input range, and the keyed harness header. I also handle component selection, BOM validation, JLC-compatible sourcing, and custom footprint creation where needed. I will deliver a clean EasyEDA project prepared for review in EasyEDA and JLCPCB’s assembly preview, including the CPL file and standard Gerbers. Choose me to turn this vehicle telemetry concept into a compact, manufacturable PCB design. Thanks!


Hi there, Could you confirm the exact GPS module/antenna connector style and whether the SIM7000G should use a nano-SIM or soldered SIM holder? Also, do you want any protected test pads or only the vehicle harness header exposed? The main challenge is fitting power protection, CAN, GPS, motion sensing, and cellular RF into one compact EasyEDA board without noisy coupling. A practical approach is a layered schematic with separate power, RF, digital, and CAN sections, then careful placement around the ESP32-WROOM-32E, SN65HVD230, ADXL345, and SIM7000G before routing. One risk is RF and switching-noise interference from the LTE modem into GPS and CAN signals. That can be reduced with controlled return paths, short antenna feeds, solid grounding, decoupling near the modem, and a clean split between high-current automotive input and sensitive logic rails. The project can be prepared as a JLC-ready package with schematic, PCB, BOM, and CPL aligned to assembly rules. Footprints will stay within JLC sourceable parts where possible, and any custom land pattern will be built directly into the project so fabrication is straightforward. Best, Hlib
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗