ASME Pig Launcher Load Calculations
$250-750 USD
Posted 1 minute ago
•
Ends in 6 days
$250-750 USD
Paid on delivery
I already have the general arrangement drawing, full bill of material, and completed pressure-design calculations for a pig launcher and receiver. What I still need is a set of ASME-compliant calculations that demonstrates the equipment’s integrity under seismic, wind, and other anticipated loads. Please base every check on the relevant ASME provisions (pressure vessel section) rather than ASCE 7, Eurocode, or any client-specific rule set. The scope of work is limited to the vessel shell, closures, and nozzles; I do not require leg or foundation analysis at this time. Your package should: • Quantify seismic, wind, and any additional mechanical loads that act simultaneously on the launcher and receiver. • Show stresses, MAWP/MATL comparisons, and utilisation ratios for the shell, closures, and each nozzle. • Reference the drawing and bill of material so that material grades, thicknesses, and weld details are clearly linked to every step of the calculation. • Conclude with a concise summary of pass/fail margins together with any recommendations. I will supply native CAD files, the GA in PDF, and the existing pressure-design spreadsheet immediately upon award. A short calculation sample from your past ASME work will speed up my review.
Project ID: 40815325
About the project
14 proposals
Open for bidding
Remote project
Active 3 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
14 freelancers are bidding on average $404 USD for this job


My 15+ years of engineering design and technical documentation experience, supported by structural engineering expertise and tools including ETABS, SAP2000, AutoCAD, Excel, and Bluebeam, align well with preparing a clear, traceable load-calculation package for your pig launcher and receiver. I can work from your GA drawing, bill of material, CAD files, and existing pressure-design spreadsheet to connect material grades, thicknesses, weld details, shell components, closures, and nozzles throughout the documentation. My background in engineering reports and technical documentation supports presenting load effects, stress checks, MAWP/MATL comparisons, utilisation ratios, and concise pass/fail conclusions in an organized professional format. I will keep the stated scope focused on the vessel shell, closures, and nozzles, with calculations referenced to the applicable ASME pressure-vessel provisions. I am ready to apply my structural engineering and documentation skills to produce a calculation package that is accurate, reviewable, and clearly linked to the supplied design records.


Hello, Structural engineering expertise in load analysis and code-compliant design gives me a strong foundation for evaluating the launcher and receiver under seismic, wind, and combined mechanical loading. My work focuses on accurate structural plans, detailed engineering documentation, and clear coordination between drawings, materials, and design requirements. I can apply this discipline to the vessel shell, closures, and nozzles, linking each check to the GA drawing and bill of material while presenting stresses, MAWP/MATL comparisons, utilisation ratios, and pass/fail margins in a concise calculation package. My engineering drawing skills also support clear traceability between the supplied CAD/PDF information and the final calculations. I will keep the scope focused on the equipment components identified and avoid extending it to legs or foundations. I would be glad to prepare a clear, review-ready ASME-based calculation package for your pig launcher and receiver. Thanks!


Hello, My 10+ years of structural engineering experience in wind, seismic, and load-path analysis directly supports the load assessment required for your pig launcher and receiver. I prepare detailed engineering calculations and technical reports for steel and light-industrial structures, with a strong focus on code-compliant, traceable design documentation. I can develop a calculation package covering the vessel shell, closures, and nozzles, linking each check to the GA drawing, BOM, material grades, thicknesses, and weld details. The report can present simultaneous load effects, stress checks, MAWP/MATL comparisons, utilisation ratios, pass/fail margins, and practical recommendations, while keeping the scope separate from leg and foundation analysis. My structural engineering background also supports clear evaluation of wind and seismic actions and their load paths through the equipment. I would be glad to apply my engineering calculation and technical-reporting skills to produce a clear, review-ready ASME-based package for your project. Thanks!


My 12+ years of structural engineering experience include seismic design considerations, gravity and lateral loading, and detailed structural calculations for steel, concrete, and masonry systems. This background is directly relevant to evaluating the launcher and receiver shell, closures, and nozzles under combined operational, wind, and seismic effects. I can develop a clear calculation package that links the GA drawing, bill of material, material grades, thicknesses, and weld information to each check, including stresses, MAWP/MATL comparisons, utilisation ratios, and pass/fail margins. My experience producing coordinated, technically detailed engineering documentation will help make the results easy to review alongside your existing pressure-design calculations. I would welcome the opportunity to apply my structural engineering expertise to this ASME-focused integrity assessment and provide a concise, well-organized deliverable for your review.


HI, As a licensed engineer with experience in mechanical design, structural engineering, CAD, and engineering analysis, I can prepare a clear integrity package for your pig launcher and receiver focused on the vessel shell, closures, and nozzles. My multidisciplinary background allows me to connect the GA drawing, bill of material, material grades, thicknesses, and weld details directly to each calculation. I can assess the applicable seismic, wind, and simultaneous mechanical loading, then present stresses, MAWP/MATL comparisons, utilisation ratios, and pass/fail margins in a professional calculation report. My proficiency with AutoCAD, SolidWorks, Revit, and simulation tools also supports accurate interpretation of your native CAD files and existing pressure-design work. I will keep the assessment aligned with the relevant ASME pressure-vessel provisions and clearly identify recommendations where margins require attention. Choose me to produce a technically organised, review-ready calculation package for your launcher and receiver.


Hi, I am a Mechanical Engineer with 15+ years of experience in pressure vessel design, structural integrity assessment, and ASME engineering calculations. I understand you need seismic, wind, and combined mechanical load assessments for a pig launcher and receiver, limited to the vessel shells, closures, and nozzles. I will review the existing pressure calculations, GA drawings, and BOM, then evaluate applicable load combinations, local stresses, nozzle loads, MAWP/MATL limits, and utilization ratios using relevant ASME Section VIII provisions and supporting engineering methods. Deliverables include a detailed calculation package, code references, stress summaries, pass/fail margins, and recommendations. I am ready to get started on your project. Please share the GA, CAD files, BOM, and pressure-design spreadsheet. I can provide a relevant calculation sample for review. Best regards, Jordan


✅ Hi, there! ✅ You already have the GA, full BOM, and pressure-design package, I’ll produce ASME Code (Section VIII pressure-vessel provisions) load calculations showing seismic, wind, and simultaneous mechanical loads for the launcher and receiver. I’ll use ASME Section VIII methodology to build a complete shell/closure/nozzle integrity package tied directly to your CAD/BOM thicknesses, material grades, and weld details. ✔ My deliverables for you will be: - ASME-compliant seismic + wind load combination and simultaneous load cases - Stress results for shell, closures, and each nozzle with utilisation ratios - MAWP/MATL comparisons and pass/fail margins for every component - A clear summary of recommendations (repairs/allowables/next checks) Send the native CAD, the GA PDF, and your existing pressure-design spreadsheet so I can start the ASME-linked stress and utilisation workflow immediately. Best regards, Michael


Hello, I provide structural engineering and engineering drawing support with experience producing clear, code-aware technical documentation from coordinated design information. Your existing GA, bill of material and pressure calculations can be organized into a traceable calculation package linking each shell, closure and nozzle check to its material, thickness and weld details. My structural engineering background supports the required load assessment and presentation of stresses, MAWP/MATL comparisons, utilisation ratios and pass/fail margins for the vessel components within scope. I also work with SolidWorks, AutoCAD and Tekla, allowing me to review and reference native CAD information alongside the PDF drawings and calculation data. I will keep the package focused on the launcher and receiver pressure-boundary components, with clear references to the applicable ASME provisions rather than unrelated design standards. I can prepare a professional, review-ready calculation document and concise recommendations based on the supplied design information. Any required final engineering certification or stamp would be provided by an appropriately licensed professional. Thanks!


HI, Structural and mechanical engineering are the core of my work, with experience in load calculations, structural analysis, mechanical design, and detailed engineering documentation for industrial projects. This aligns directly with your need to verify a pig launcher and receiver under seismic, wind, and other simultaneous loads while keeping the assessment focused on the shell, closures, and nozzles. I can develop a clearly referenced calculation package connecting the GA, bill of material, material grades, thicknesses, and weld details to each check. My structural engineering background supports stress evaluation, MAWP/MATL comparison, utilisation assessment, and concise pass/fail conclusions for the vessel components, with recommendations where margins require attention. I will base the work on the applicable ASME pressure-vessel provisions requested rather than substituting another design code. I am ready to apply my mechanical design and structural analysis experience to produce a technically organized, review-ready package for your launcher and receiver.


Hello, Our mechanical engineering support and structural engineering skills align directly with your need for integrity checks on the pig launcher and receiver under seismic, wind, and combined operating loads. I can work from your GA drawing, BOM, native CAD files, and existing pressure-design calculations to keep material grades, thicknesses, weld details, shell sections, closures, and nozzles traceable throughout the calculation package. The deliverable will focus precisely on the stated scope: shell, closures, and nozzles, with load effects, stress checks, MAWP/MATL comparisons, utilisation ratios, and clear pass/fail margins. I will structure the calculations around the applicable ASME pressure-vessel provisions specified for the project rather than substituting another design code, and include concise recommendations wherever margins require attention. Live Experts brings over a decade of technical delivery experience across engineering, mechanical support, industrial automation, and hardware-focused projects. I am ready to prepare a professional, reviewable calculation package for both launcher and receiver. Thanks!
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗