KiCad PCB Design Engineer Required – Custom 4G/2G GPS Tracker Hardware Modification
₹1500-12500 INR
Posted 1 minute ago
•
Ends in 6 days
₹1500-12500 INR
Paid on delivery
We are looking for an experienced electronics hardware and PCB design engineer to modify an existing open-source GPS tracker design using KiCad. The current design uses an ESP32-S3 microcontroller and SIM868 GSM/GNSS module. We want to customize it for commercial vehicle tracking applications. Required Modifications Vehicle Power Input Support 9–36V DC input. Include reverse-polarity, overvoltage and transient protection. Design suitable DC-DC power regulation for GSM current peaks. Ignition Detection Support 9–36V ACC ignition input. Detect ignition ON/OFF through an ESP32 GPIO. Include input protection, filtering and hysteresis. Backup Battery Support a 3.7V, 500 mAh single-cell Li-ion battery. Automatic charging when external power is available. Automatic switchover when vehicle power is disconnected. Battery protection and low-battery monitoring. External Relay Control Switched-ground output using a MOSFET. Compatible with external 12V/24V relay coils. Include appropriate electrical protection. Existing Hardware Retain ESP32-S3 and SIM868. Retain GSM and GNSS antenna connections. Review and optimize the existing circuit. Minimize PCB size and BOM cost. Required Deliverables Complete modified KiCad schematic. Updated PCB layout. KiCad project and source files. Gerber and drill files. BOM with manufacturer part numbers. Pick-and-place files. Electrical rule check (ERC) and design rule check (DRC) reports. Power-path calculations and design notes. Manufacturing-ready design documentation. Preferred Experience GSM/GNSS tracker hardware design. Automotive 12V/24V electronics. Li-ion battery charging and power-path management. ESP32 and SIMCom modules. KiCad PCB design and manufacturing. Important: We will provide the existing KiCad source files to the selected freelancer. The engineer must review the existing design and validate all modifications before delivering the final manufacturing files.
Project ID: 40815016
About the project
2 proposals
Open for bidding
Remote project
Active 11 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
2 freelancers are bidding on average ₹7,300 INR for this job


The trickiest part here is the 9-36V input feeding SIM868 current peaks, so I'd start with the buck stage and bulk capacitance, then add the load-dump and reverse protection in front of it. The battery path, ACC input and relay driver follow from that. I'll review your existing KiCad files first, then deliver the updated schematic, layout, manufacturing files, BOM with part numbers and the power calculations. About 8 days. I have solid experience with GSM/IoT modules, battery boards and industrial power electronics, and some of my PCB boards are in my portfolio.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗