SolidWorks Enclosure Symbol Audit

$10-30 USD

Posted 1 minute ago

•

Ends in 6 days

$10-30 USD

Paid on delivery

I will send you the full reference package—my PCB CAD file, the current SolidWorks models for the two enclosure tops, and the matching PDF drawings. Working in SolidWorks 2025 (or later), your first job is to open the enclosure parts and confirm that every printed-circuit BOARD LED lines up exactly with the Symbols on the enclosure and the call-outs on the PDFs. Use both sources side-by-side; that dual check is important to me. If you spot even the slightest mis-alignment, make the correction inside the SolidWorks part, then update the dimensions that show the new position on the PDF drawing so the documentation always reflects the model. When everything is perfect, export one clean STL of each top with the symbols actually cut through (those openings should read as transparent/null in the file). Return the native SLDPRT versions without the cut-outs preserved—so I end up with two versions of every part. Deliverables: • Corrected SLDPRT files (no cut-outs) • Updated enclosure PDF drawings where changes were required • STL files with the symbol cut-outs made and set as voids • Brief confirmation report of the checks performed and any adjustments made That’s it—quick QA, precise results, all in the latest SolidWorks environment.

Project ID: 40814482

About the project

7 proposals

Open for bidding

Remote project

Active 7 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

7 freelancers are bidding on average $77 USD for this job

User Avatar
Flag of UNITED STATES

Hello, Precision-focused 3D modeling and CAD/CAM skills make me well suited to audit your SolidWorks enclosure tops and verify that the PCB LEDs, enclosure symbols, and PDF call-outs agree exactly. My background in structural engineering and detailed construction documentation has trained me to work carefully with dimensions, coordinated drawings, and model accuracy. I understand the importance of maintaining consistency between the native SLDPRT parts and their drawings. I can review the two enclosure models against the supplied PDF references, correct any detected symbol misalignment, update affected drawing dimensions, and provide the required versions: corrected parts without preserved cut-outs, STL exports with the symbol openings represented as voids, updated PDFs where needed, and a concise confirmation report. I would be glad to apply my CAD/CAM and 3D modeling experience to deliver a clean, carefully checked enclosure package in the latest SolidWorks environment. Thanks!

User Avatar
Flag of SLOVAKIA

Hello, Legislatíva Lauko here, with 10+ years of experience in 3D Modelling and 3D Rendering, including precise SolidWorks part review, CAD correction, and technical drawing updates. I understand your enclosure symbol audit needs a side-by-side check of the PCB CAD, SolidWorks tops, and PDF drawings to confirm every LED symbol aligns exactly. I’ll correct any offsets in the model, update the affected PDF dimensions, and prepare clean STL exports with the cut-outs set as voids, plus the native SLDPRT files without preserved cut-outs. Start the chat, and we can review the files and details further. Regards, Legislatíva Lauko

User Avatar
Flag of UKRAINE

Hi there, SolidWorks Enclosure Symbol Audit looks like a precise CAD QA job, matching PCB LED lines with enclosure symbols and updating drawings whenever alignment shifts. As a Full Stack Developer with 10+ years delivering accurate, versioned digital artifacts, I’ll run a strict side-by-side check in SolidWorks 2025+, correct any misalignment directly in the two enclosure top SLDPRT parts, and ensure the PDF callouts/dimensions mirror the model changes. I’ll then export clean STLs: one set with symbol cut-outs made as voids (openings transparent/null), and the native SLDPRT versions without cut-outs preserved. You’ll receive corrected SLDPRTs, updated enclosure PDFs, STLs ready for review/production, plus a brief confirmation report covering every check and adjustment. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Vadym P.-

User Avatar
Flag of UNITED STATES

Hi there, I can complete the SolidWorks enclosure symbol audit with the exact dual-reference verification you require. As a Mechanical CAD Designer with 12+ years of relevant SolidWorks experience, I will compare both enclosure tops against the PCB CAD data and matching PDF call-outs, checking every BOARD LED and symbol position precisely. I will correct even minor misalignments in SolidWorks 2025 or later, update affected drawing dimensions, and verify model-to-document consistency. You will receive corrected native SLDPRT files without cut-outs, clean STL files with symbols fully cut through as true voids, revised PDFs where needed, and a concise QA report documenting all checks and adjustments. I will also validate the STL geometry before delivery to ensure the openings export correctly and each file is production-ready. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.

User Avatar
Flag of UNITED STATES

Hello, My CAD/CAM and 3D modelling skills are directly suited to auditing the SolidWorks enclosure tops, checking the PCB LED locations against the enclosure symbols and PDF call-outs, and producing accurate native and export files. My mechanical engineering background and 10+ years of professional engineering experience support careful model-and-drawing coordination, precise revisions, and clear technical documentation. I can work with the supplied enclosure parts and drawings, correct any symbol misalignment in the SolidWorks models, update affected PDF dimensions, and provide the two required versions of each top: corrected SLDPRT files without preserved cut-outs and STL exports with the symbol openings represented as voids. I will also provide a concise confirmation report identifying the checks completed and any adjustments made. Choose me for a precise, documentation-focused SolidWorks audit and clean deliverable package. Thanks!

User Avatar
Flag of UNITED STATES

Hello, SolidWorks and 3D CAD expertise make me well suited to audit your enclosure tops with the precision this project requires. I can work through the supplied PCB CAD files, SolidWorks parts, and PDF drawings to verify that each LED location matches the enclosure symbols and documented call-outs. My mechanical engineering background supports careful dimensional checking and accurate part corrections, while my experience with SolidWorks and CAD/CAM aligns directly with producing the required native SLDPRT files and STL exports. I can also update affected drawing dimensions and provide both the versions without preserved cut-outs and the STL files with the symbol openings represented as voids. I will deliver a concise confirmation report documenting the checks and any adjustments made. Choose me for a precise, documentation-focused SolidWorks audit and clean final deliverables. Thanks!

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅