Fix Ricoh MP C6004 Paper Jams
$15-25 USD / hour
Posted 1 minute ago
•
Ends in 6 days
$15-25 USD / hour
My Ricoh MP C6004 has started jamming almost every time I print in black-and-white. The sheets stop inside the machine, right around the toner / fuser section, so I suspect the feed path or fuser rollers need attention—possibly a pickup clutch, worn rollers, or a sensor giving false feedback. I need a technician who knows this model inside out to inspect, diagnose, and eliminate the jam source, then test the machine until it runs a full stack smoothly. Replacement parts (rollers, sensors, fuser parts) can be billed separately once we confirm what is required; I’m happy to approve them quickly so the fix isn’t delayed. Please outline how soon you can be onsite, your experience with Ricoh colour MFPs—especially the MP C6004 or similar—and what checks you’ll perform before and after the repair. A short post-service report confirming jam-free operation will complete the job.
Project ID: 40814229
About the project
1 proposal
Open for bidding
Remote project
Active 24 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
1 freelancer is bidding on average $19 USD/hour for this job


Hello, Repeated paper jams around the toner and fuser section of your Ricoh MP C6004 need a proper mechanical diagnosis rather than simply replacing rollers and hoping the problem disappears. I'd approach this by tracing the complete paper path and identifying exactly where the sheet stops. The inspection would cover the registration and transport rollers, feed mechanisms, pickup clutch operation, paper sensors, fuser entrance and exit rollers, and relevant paper-path guides. I'd also compare the jam behaviour between black-and-white and colour printing to determine whether the issue is related to a specific feed path, operating condition, or component. Once the root cause is identified, I'd confirm the required replacement parts and obtain approval before carrying out repairs. After servicing, I'd run repeated black-and-white and colour print tests, including a multi-page paper-feed test, to verify consistent paper transport. The handover would include the diagnosed cause, repairs performed, any replaced components, and post-repair test results. Is the jam code displayed on the Ricoh's control panel consistently the same, and does the sheet stop at exactly the same physical location each time? Thank you,
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗