System Validation Specialist Needed

$750-1500 CAD

Posted 1 minute ago

•

Ends in 6 days

$750-1500 CAD

Paid on delivery

Location: Bowen Island - BC Canada Subject: Request for Engineering Review, Validation and Certification – Existing Electrical Installation Dear Sir or Madam, I am contacting you to determine whether you would be willing to undertake an engineering review, validation and certification of an existing electrical installation on my property on Bowen Island, British Columbia. The installation was completed approximately 20 years ago and has operated flawlessly ever since, with no performance issues. The system is connected to the utility grid and uses three transformers to transmit electricity over approximately 2,300 feet across the property. The configuration is as follows: 1. At the bottom of the property, the incoming 220-volt supply is stepped up to 600 volts. 2. Approximately 1,300 feet uphill, a second transformer steps the voltage down to 220 volts to supply a second residence. This is achieved through a T-connection, while the 600-volt line continues uphill. 3. At the upper end of the property, approximately 2,300 feet from the bottom, a third transformer steps the voltage down from 600 volts to 220 volts to supply the main residence. Technical Safety BC has inspected the installation and identified certain non-conforming aspects, including concerns regarding the transformer configuration and bonding. However, the installation has not been ordered shut down and remains in operation. What I am seeking is a professional engineering review of the existing installation, with the objective of having it validated and certified as safe and compliant, supported by the appropriate engineering documentation for Technical Safety BC. An essential requirement is that the existing T-connection supplying the second residence must be retained. Installing a separate electrical supply line to that residence would be prohibitively expensive. My preference is to have the existing installation validated and certified, with any necessary corrective work identified, rather than undertake an entirely new design or replacement of the system. I would appreciate your confirmation as to whether your firm can undertake this type of engineering review and certification, and what the process and estimated costs would be. I can provide photographs of the transformers, their nameplates, the T-connection, and correspondence from Technical Safety BC. I look forward to hearing from you. Kind regards, Jean Michel Krief

Project ID: 40814010

About the project

4 proposals

Open for bidding

Remote project

Active 5 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

4 freelancers are bidding on average $1,219 CAD for this job

User Avatar
Flag of NIGERIA

Jean Michel, your Bowen Island installation, three transformers stepping voltage across 2,300 feet with a T-connection serving the second residence, is exactly the kind of engineering challenge I take on. I can review the Technical Safety BC findings on transformer configuration and bonding, then prepare certification documentation while preserving your T-connection as required. My background spans Engineering, Project Management, and Design for utility-scale electrical systems, so I can map corrective work without a full redesign. Could you share the Technical Safety BC inspection report and transformer nameplate photos so I can pinpoint the exact bonding and configuration deficiencies before scoping the certification work? Chukwudi

User Avatar
Flag of UNITED STATES

My expertise is software engineering and compliance, not professional electrical engineering, so I cannot responsibly claim the qualifications required to inspect, validate, seal, or certify this installation for Technical Safety BC. I can, however, support the documentation side of the project through structured technical document preparation, evidence organization, and compliance-focused reporting. My experience covers system architecture, detailed technical documentation, testing, security, and compliance-oriented work, which could help organize transformer nameplates, photographs, inspection findings, correspondence, and proposed corrective actions for review by a qualified British Columbia electrical engineer. For the actual engineering assessment—particularly the transformer configuration, T-connection, bonding, protection, and certification—you should appoint a licensed professional engineer authorized to practise in BC and familiar with Technical Safety BC requirements. I would be glad to assist with the technical documentation and compliance package once that professional is engaged.

User Avatar
Flag of UNITED STATES

Hello, As a multi-state licensed Professional Engineer, I can provide a disciplined technical assessment and engineering documentation review for your existing installation. My background includes engineering calculations, structural and technical assessments, building-code compliance, design reviews, and signed and sealed engineering documents where authorized. I can review the available transformer, conductor, connection, bonding, and installation information against the applicable requirements and clearly document non-conforming conditions, required corrective work, and the technical basis for any certification. My experience preparing professional engineering documentation and coordinating permitting supports a clear submission for review by the relevant authority. Because electrical certification in British Columbia may require authorization by a qualified local electrical professional, I would also identify where coordination with a BC-licensed electrical engineer or Technical Safety BC is necessary rather than overstating my authorization. I am ready to assess the existing configuration with the T-connection treated as an important project constraint and provide practical engineering support toward compliance and approval. Thanks!

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅