Dual Site GL.iNet VPN Setup
$30-250 USD
$30-250 USD
Paid on delivery
I’m looking to establish a rock-solid, secure tunnel between two [login to view URL] routers—each a different model—so that every bit of my work traffic leaves through my home connection, which already has a public IP. The goal is full-tunnel routing: once the link is up, devices behind the remote router should behave as if they’re sitting on the home network, inheriting its IP, DNS, and any security policies I apply there. Here’s what I need from you: design the best protocol choice (OpenVPN, WireGuard, or another option you recommend for stability and speed), configure both routers end-to-end, harden the setup against leaks or unauthorized access, and troubleshoot until latency and reconnect performance are solid. A short hand-off document and a quick screen-share walkthrough will wrap the job so I can maintain or replicate the configuration later. I already have the equipment Server Location (Texas): [login to view URL] Brume 2 (GL-MT2500) connected behind an AT&T Gateway (BGW210) with a public IP. Client Location (Mexico): [login to view URL] Beryl AX (GL-MT3000). But I couldn't set it up myself
Project ID: 40814011
About the project
50 proposals
Remote project
Active 1 min ago
Looking to make some money?
Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs


You need a dependable, full-tunnel link between your Texas and Mexico routers so the Mexico side behaves like your home network, with no leaks and no surprises. I'm a network engineer with about 20 years in enterprise networks and a CCNP Enterprise certification. VPN and multi-vendor troubleshooting are a core part of my work. How I'd handle it: - Remote, structured assessment of both sites - A protocol recommendation based on your needs for stability and speed - Configuration with a change plan and rollback - Leak and access testing, plus reconnect and latency verification - A concise hand-off document and a screen-share walkthrough I can't guarantee specific results, but I work methodically until the setup is verified. Two quick questions: 1. Roughly how many devices will use the Mexico router? 2. Have you got any tunnel partly working, or are we starting fresh?
50 freelancers are bidding on average $122 USD for this job


Hi, I read your brief: a short hand-off document and a quick screen-share walkthrough will wrap the job so you can maintain or replicate the configuration later. How I'd handle it: 1. Confirm the topology, addressing and crypto parameters on both ends before touching production. 2. Build and test the tunnel and routing, with firewall rules limited to what each side needs. 3. Hand over configs, a test checklist and short runbook notes. Relevant past work: I delivered multiple 5.0-rated VPN builds (SonicWall, L2TP, OpenVPN, a 2-hop chained VPN on a Synology NAS with Docker). Two quick questions: - Which devices or platforms terminate each end of the tunnel? - Do any subnets overlap between the sites? Manoj, Synetal Solutions


I will configure a secure WireGuard site-to-site full-tunnel VPN between your Brume 2 (GL-MT2500) in Texas and Beryl AX (GL-MT3000) in Mexico, including AT&T BGW210 port forwarding, routing, DNS, and remote-network access. I’ll harden both routers against DNS/IP leaks and unauthorized access, configure automatic reconnection, troubleshoot speed and latency, and provide a documented setup with a screen-share walkthrough so you can maintain it confidently. Best Regards, Muhammad


The AT&T BGW210 is the real gate here. Most ISP gateways don't pass inbound VPN traffic cleanly even with a public IP because of SIP ALG, port forwarding quirks, or double-NAT hiding behind CGNAT despite what the dashboard says. I'd verify the public IP is actually routable first, then put the Brume 2 in DMZ mode on the gateway and run WireGuard server-side. Client config on the Beryl AX would force all traffic through the tunnel with a kill-switch rule and DNS pointed back to Texas so nothing leaks if the connection drops. I built a similar VPS infrastructure setup under 24 hours for an Australian client, full server hardening and routing included. You can see that and other network work at ffulb.com. Once I can SSH into both routers I'll confirm the gateway isn't blocking UDP 51820, set up the tunnel, lock down the firewall, and walk you through it over screen-share with a short doc so you can rebuild it later if needed.


The connection issue between your Texas GL-MT2500 Brume 2 and the AT&T BGW210 gateway usually stems from double NAT blocking incoming WireGuard UDP handshakes. - Configure IP Passthrough on the BGW210 so the public IP binds directly to the Brume 2 MAC address, removing firewall interference. - Deploy WireGuard instead of OpenVPN to maximize speed between Texas and Mexico while tuning MTU sizes to prevent packet fragmentation. - Enforce a strict kill-switch and custom DNS rules on the Beryl AX so remote devices never leak traffic to local ISPs. I have 31 completed projects with a 5.0 rating on Freelancer, specializing in Linux servers and DevOps. Delivery is at a fixed price of $130. Does your AT&T line in Texas have a dynamic or static public IP? Aria


Hello, the part that decides this job is the AT&T Gateway (BGW210) in front of your Brume 2, since it can block the tunnel unless it passes one UDP port through to the router. I would check that first, then set up WireGuard with the Brume 2 as the home end and the Beryl AX as the client, sending all its traffic and DNS through the tunnel. I would also write down both routers' current admin settings before changing anything, so a bad rule cannot lock you out of the Texas unit. The last step is a screen-share to turn the tunnel on, test for leaks and confirm it reconnects after a drop.


Configure the Brume 2 as the home WireGuard server. Configure the Beryl AX as the remote WireGuard client. Set up full-tunnel routing so remote internet traffic exits through your Texas home connection. Configure DNS routing and firewall rules to prevent traffic leaks if the VPN disconnects. Review the AT&T BGW210 gateway, public IP, and UDP port forwarding. Check LAN subnet compatibility and configure access to required home-network devices. Test public IP, DNS leaks, connectivity, latency, and automatic reconnection. Provide a configuration handover document and a screen-share walkthrough. I would also test the behavior after restarting both routers and temporarily interrupting the connection, rather than considering the setup complete simply because the initial tunnel connects. Before starting, I would confirm: Is the public IP on the AT&T gateway static, or does it change periodically? What are the LAN subnet ranges at both locations? Should all remote-router traffic use the home connection, or only selected devices?


Hello, A two router full tunnel between the Texas Brume 2 and Mexico Beryl AX needs more than simply importing a VPN profile. The AT&T BGW210 path, public IP, gateway rules, DNS behavior, fail closed routing, and reconnect handling all need to work together so remote devices consistently exit through home. I will select and configure the most suitable protocol for speed and stability, then verify routing, DNS, leak prevention, access controls, latency, and recovery after interruptions. Web Security will guide the hardening, while a clean Typescript based validation utility can document reachable services and expected routes without adding unnecessary complexity. I will also test common failure cases, confirm that traffic cannot silently bypass the tunnel, and provide a concise handoff document covering credentials, router settings, troubleshooting, and replication. The Artificial Intelligence experience in my wider toolkit also supports a careful, evidence based troubleshooting process rather than guesswork. I can take this from the current failed setup to a tested configuration and finish with a practical screen share walkthrough. Gabriel
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗