Development of a Working Ultrasonic Time-of-Flight (TOF) Prototype -- 2

₹37500-75000 INR

Posted 1 minute ago

•

Ends in 6 days

₹37500-75000 INR

Paid on delivery

This is a hardware development project. I require a fully functional working prototype, not a simulation, research paper, or theoretical design. The final deliverable must demonstrate ultrasonic TOF measurement on small non-ferrous metal components through a working prototype and demonstration video. I need help taking a lab-bench concept for measuring ultrasonic wave velocity and turning it into a rugged, handheld instrument that works reliably on Platinum, Silver, Nickel, and brass samples. The core tasks include designing the full analog front-end (pulser/receiver, low-noise pre-amp, gain control, anti-alias filters), selecting and driving the piezo transducers, and implementing a precise time-of-flight algorithm in an embedded platform. I am open to ARM, DSP, or FPGA solutions as long as we can achieve micro-second timing resolution and keep power draw low enough for a battery-powered unit. On the digital side I will need firmware that triggers the pulse, captures echoes through a high-speed ADC, processes the signal (envelope detection, filtering, thresholding), and converts flight time to velocity with temperature compensation. A simple menu-driven interface on a small LCD/OLED plus USB-C data output should round out the user experience. Because the device must differentiate among Platinum, Silver, Nickel, and brass, repeatability and calibration routines are critical. I would like a calibration workflow that lets the user store reference blocks and automatically correct readings. Deliverables • Schematics and PCB Gerbers for the analog and digital boards • BOM with production-grade components • Firmware source code and build instructions • Signal-processing algorithm documentation (MATLAB or Python reference OK) • 3D files for a compact enclosure, including battery bay • One working prototype verified on all four metals against known velocity tables Acceptance criteria 1. Velocity error ≤ ±1 % on each listed metal over 15–35 °C. 2. Battery life ≥ 6 h continuous use. 3. Complete, compilable firmware and reproducible PCB files provided. If you have proven experience in ultrasonic NDT, low-noise mixed-signal design, and embedded C/C++ (or VHDL/Verilog), I’d like to review relevant past work and discuss your preferred approach.

Project ID: 40813892

About the project

1 proposal

Open for bidding

Remote project

Active 20 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅