IoT-based Machine Utilization Monitoring project for a CNC machine and conventional lathe. -- 2

₹1500-12500 INR

Posted 1 minute ago

•

Ends in 6 days

₹1500-12500 INR

Paid on delivery

The objective is to detect machine states (OFF, IDLE and RUNNING) and record their operating times using an ESP32. We want a non-invasive current measurement solution. The machine has an incoming AC supply through a stabilizer, which is converted internally to DC for the motor. I need help with: Selecting the correct AC/DC current sensor. Designing the sensor interfacing and signal-conditioning circuit. Preparing the complete hardware BOM and wiring diagram. Testing the setup to distinguish OFF, IDLE and RUNNING states. I already have an ESP32 DevKit and some basic electronics components. Could you help validate and build a working hardware prototype? Please share your experience and estimated charges.

Project ID: 40812193

About the project

2 proposals

Open for bidding

Remote project

Active 5 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

2 freelancers are bidding on average ₹6,250 INR for this job

User Avatar
Flag of UNITED KINGDOM

Since the motor is fed through an internal AC/DC drive, the best signal is usually the AC input current, measured with a split-core CT sensor clamped on one phase. IDLE versus RUNNING then comes down to a current threshold plus some hysteresis and a time filter. I'll pick the sensor, design the burden and conditioning stage for the ESP32 ADC, deliver the BOM, wiring diagram and state-detection firmware with time logging. I've worked on industrial instrumentation and monitoring devices, and ESP32 and STM32 firmware. Prototype package in about 5 days.

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅