CNC Program for Citizen A20 — Nylon Part
$250-750 USD
Posted 1 minute ago
•
Ends in 6 days
$250-750 USD
Paid on delivery
We need a CNC programmer to develop a program for one nylon part on our Citizen A20. Prior Swiss-lathe programming experience is welcome but is not required. Please describe your relevant CNC programming experience and how you would verify compatibility with this machine. State whether you will do the programming personally or use another specialist. Confirmed machine and setup: - Citizen A20 VIIPL, 2010 - FANUC Series 32i; startup display G203-60.0 - Guide-bushing configuration, confirmed by our shop - Starting stock: 5/8-inch (0.625-inch) natural nylon 6/6 rod - Station 1: cutoff; station 2: turning - Cutoff holder marking: Kyocera KGDL10-3JX The engineering drawing and machine/tooling photos will be provided privately to candidates. Exact insert geometry, offsets, clearances and machine-specific commands must be verified before finalizing the program. Let us know if you need an existing successful machine program as a compatibility reference. Required deliverables: 1. Editable G-code suited to our confirmed machine configuration and part drawing. 2. Matching tooling and offset list, including insert requirements. 3. Setup sheet covering stock, guide bushing/workholding, tool positions, cutoff and special setup requirements. 4. Program verification and remote support through first-part prove-out, including corrections for the agreed drawing and machine setup. Our shop will perform the controlled machine prove-out and inspect the first article. Please quote your total fixed price for this scope, the number of correction/support rounds included, and a realistic delivery period with a clear start point. Identify any missing information before committing. We will confirm the drawing and scope before awarding. Please submit an actual bid rather than a placeholder price or delivery estimate. Any scope changes must be agreed before additional work.
Project ID: 40811827
About the project
15 proposals
Open for bidding
Remote project
Active 2 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
15 freelancers are bidding on average $405 USD for this job


Hello, Our CNC programming, CAD/CAM, and engineering-drawing skills directly match the need for an editable program and complete setup documentation for your nylon part. Live Experts LLC also brings over a decade of technical delivery experience across manufacturing, industrial automation, and mechanical engineering support. I can personally handle the programming through Live Experts LLC, rather than passing the work to an unidentified third party. The confirmed Citizen A20 VIIPL, FANUC Series 32i, guide-bushing setup, 5/8-inch nylon 6/6 stock, station assignments, and Kyocera cutoff holder will be treated as fixed machine inputs. I would verify machine compatibility against the drawing, tooling photos, exact insert geometry, offsets, clearances, and any available successful reference program before finalizing the G-code. The deliverables would include editable CNC code, tooling and offset requirements, and a clear setup sheet, with remote support during the controlled first-part prove-out and agreed correction rounds. My fixed price is [insert actual fixed price], including [insert number] correction/support rounds. Delivery is [insert delivery period] starting from receipt and confirmation of the final drawing, tooling information, and required machine-reference data. I would be pleased to take responsibility for this programming scope and support your shop through verification. Thanks!


Hello, Greetings , Good afternoon! I’ve carefully checked your requirements and really interested in this job. I’m a skillful mechanical engineer by using 3D CAD Software. I’m offering best quality and highest performance at lowest price. I can complete your project on time and your will experience great satisfaction with me. I’m well versed in Solidworks, AutoCAD, Manufacturing Engineering, Manufacturing, G-code, CAD/CAM, Engineering Drawing and CNC Programming and several 3D CAD Software. I have rich experienced in Industrial & Mechanical design. For more information about me, please refer to my portfolios. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details.. Thank you


I've successfully programmed similar complex components on Citizen Swiss-type lathes, ensuring tight tolerances and efficient cycle times. My experience with FANUC controls, specifically the 32i series, allows me to quickly adapt to your machine's G203-60.0 configuration and leverage its advanced capabilities for optimal part production. My approach involves a detailed review of your part print and material specifications. I'll then develop the G-code program using Mastercam, simulating the machining process to identify potential collisions and optimize toolpaths. Verification of compatibility with the Citizen A20 VIIPL will involve cross-referencing machine parameters and utilizing the simulator's post-processor to ensure accurate execution. I will personally handle all programming to maintain direct quality control. Given the guide-bushing setup, are there any specific tooling preferences or existing toolholders you'd like me to consider? I'm confident I can deliver a robust and efficient program for your nylon part. I'm available for a brief call to discuss your project further.


The Citizen A20 nylon-part program will be hand-written, editable G-code based on your existing successful program, so the machine-specific codes come from a file your shop has already run. I do the programming personally, with AI assistance. I have no Swiss-lathe production work to cite, so I check compatibility line by line against your reference program, FANUC 32i conventions and a backplot before prove-out. The full scope costs 375 USD. It covers the G-code, a tooling and offset list with insert requirements for the KGDL10-3JX cutoff and the station 2 turning tool, a setup sheet, and written support through first-part prove-out with 2 correction rounds. The first milestone is 75 USD and is part of the total. It buys a process plan and the tooling and offset list, accepted when your shop confirms they match the drawing and machine. The remaining 300 USD is paid in later milestones. To start, I need the drawing, the machine and tooling photos, and that reference program. Price: 375 USD fixed · Timeline: 8 working days from access/brief Konrad


Hello, My CAD/CAM and engineering-drawing skills are directly relevant to developing and documenting a CNC program from your part drawing and confirmed Citizen A20 setup. I can interpret the drawing accurately, prepare editable program documentation, and produce a coordinated tooling, offset, and setup package for your shop’s review. My engineering background includes detailed technical design, plan production, shop-drawing review, and multidisciplinary quality control using AutoCAD and Revit. That experience supports careful checking of dimensions, materials, tool positions, clearances, and setup requirements. I would personally complete the programming and documentation rather than outsourcing it. Machine compatibility would be verified against the Citizen A20 VIIPL, FANUC Series 32i controls, guide-bushing configuration, station assignments, confirmed tooling, and any successful reference program you provide before finalizing the code. Because the profile does not document prior Citizen Swiss-lathe programming, I would treat the machine-specific commands and insert geometry as items requiring confirmation from the drawing, tooling photos, and shop reference material. I can provide a fixed-price quote, included correction rounds, and delivery period after reviewing those materials and confirming the exact scope. Thanks!


Hi, Dear. I am a licensed Professional Engineer with CAD/CAM experience relevant to technical CNC documentation. I will personally prepare the program, tooling list, setup sheet, and verification notes.


Hello, My CAD/CAM background and engineering drawing expertise allow me to produce clear, editable manufacturing documentation from your part drawing and confirmed Citizen A20 setup. I can develop the CNC program, tooling and offset list, and setup sheet around the FANUC Series 32i, guide-bushing configuration, 5/8-inch nylon 6/6 stock, and specified cutoff and turning stations. I will personally complete the programming rather than subcontracting it. My engineering and CAD experience supports careful review of tool positions, stock, workholding, clearances, insert requirements, and machine-specific details. Before finalizing, I would verify compatibility against the drawing, machine configuration, tooling photos, exact insert geometry, offsets, and, if available, an existing successful machine program. The controlled prove-out and first-article inspection can then be supported with agreed corrections. I can provide the editable G-code, matching tooling/offset documentation, and setup sheet, with the final fixed price, included correction rounds, and delivery period established after reviewing the private drawing and machine references. I would be glad to personally support this Citizen A20 programming scope. Thanks!


✅ Hi, there! ✅ I can develop the full Citizen A20 VIIPL (FANUC Series 32i) CNC program for your Citizen A20 nylon 6/6 rod part, then support first-part prove-out until your shop can approve the first article. I’ve programmed Swiss-style/FANUC lathes and will map your guide-bushing configuration and station 1 cutoff + station 2 turning workflow into a clean, editable G-code build. ✔ My deliverables for you will be: * Editable, machine-suited G-code (verified against your confirmed setup) * Tooling + insert and complete offset list (including Kyocera KGDL10-3JX cutoff holder data) * Setup sheet: stock (5/8" rod), guide bushing/workholding, tool positions, and special cutoff/setup notes * Remote verification and correction rounds for first-part prove-out (based on your approved drawing) I’ll only finalize commands after reviewing the provided drawing and machine/tooling photos (and I can reference an existing successful program if you share one). Best regards, Mike


Hi, My CAD/CAM expertise and licensed engineering background enable me to translate your nylon part drawing into a precise, manufacturable CNC solution while respecting the Citizen A20 setup and FANUC control requirements. I can develop the editable G-code, tooling and offset list, and a clear setup sheet covering the 5/8-inch nylon stock, guide-bushing arrangement, cutoff and turning stations, and required setup conditions. My mechanical engineering experience, 3D CAD capability, and familiarity with SolidWorks and AutoCAD support accurate interpretation of the drawing and manufacturability checks. I will perform the programming personally and will verify machine compatibility against the confirmed Citizen A20 VIIPL, FANUC Series 32i configuration, station assignments, tooling information, and any successful reference program supplied before finalizing machine-specific commands. My fixed-price quote is [insert price], including [insert number] correction/support rounds, with delivery within [insert period] from receipt of the confirmed drawing and machine/tooling references. I would be glad to support your controlled first-part prove-out and make corrections within the agreed scope.


Hi there, Your Citizen A20 VIIPL nylon-part scope calls for careful machine-specific validation, not generic FANUC code. I am a CNC Programmer and Manufacturing Engineer with 12+ years of experience developing turning programs, tooling plans, setup documentation, and first-article prove-out support. I will personally create the editable G-code for the FANUC 32i/G203-60.0 environment, using the drawing, tooling photos, and an existing successful program as a syntax and compatibility reference. Before release, I will verify insert geometry, offsets, guide-bushing clearances, cutoff details for the Kyocera KGDL10-3JX holder, synchronization, and machine-specific commands. You will receive the program, complete tooling/offset list, setup sheet, and remote prove-out support. I can include two correction rounds and deliver within five business days after receiving the approved drawing, photos, tooling data, and reference program. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.


Hi, I can personally develop the editable G-code, tooling/offset list, and setup sheet for your 2010 Citizen A20 VIIPL with FANUC 32i, guide bushing, and 0.625-inch nylon 6/6 stock. My CNC programming approach emphasizes machine-safe code, practical setup documentation, and controlled prove-out support. Before release, I will compare the drawing and tooling photos against an existing successful A20 program, verify G/M-code conventions, channel and spindle behavior, cutoff orientation, insert geometry, offsets, clearances, and nylon-specific cutting requirements. I will also support first-article prove-out remotely and revise the program for the agreed drawing and setup. Once I review the private files and reference program, I can confirm a firm fixed scope, realistic delivery period from receipt of complete inputs, and the included correction rounds. Could you provide one proven A20 VIIPL program so I can confidently match your machine-specific code conventions? I’m ready to review the drawing, photos, and machine reference files and move forward promptly. Richard


✅ Hi There✅ , Good afternoon! I am professional engineer with skills including CAD/CAM, Manufacturing Engineering, Engineering Drawing, Manufacturing, CNC Programming and G-code. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,


Hello, My CAD/CAM and engineering-drawing skills can support the documentation side of your Citizen A20 nylon-part project, including interpreting the drawing and producing organized technical files. However, my profile does not show prior Citizen A20, Swiss-lathe, FANUC 32i, or CNC G-code programming experience, so I cannot honestly claim the machine-specific programming and prove-out expertise this scope requires. I can work from the supplied drawing and tooling information for CAD/CAM documentation, but compatibility verification of guide-bushing operation, station assignments, cutoff tooling, insert geometry, offsets, clearances, and machine-specific commands should be performed by an experienced Citizen/FANUC Swiss-lathe specialist. I also cannot responsibly state a fixed price, correction-round count, or delivery period for this programming scope without that specialist capability. For an accurate and safe result, I recommend selecting a freelancer with demonstrated Citizen A20 and FANUC Series 32i programming experience. Thanks!
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗