Comprehensive MV/LV Electrical System Studies

$3000-5000 SGD

Posted 1 minute ago

•

Ends in 6 days

$3000-5000 SGD

Paid on delivery

Electrical System Studies – MV & LV Harmonic Assessment – Assessment in accordance with IEEE 519 or equivalent IEC standards, covering transformers, cables, switchgear, generators and load distribution. System frequency: 50 Hz. Load Flow Analysis – Analysis of the overall electrical power distribution system. Short Circuit Analysis – Short-circuit fault level assessment for the overall power system. Transformer Selection – Verification of transformer ratings based on the calculated maximum demand and system requirements. Protection Coordination Study – Coordination of protective devices, including relays, ACBs, MCCBs and other protection devices. Voltage Drop Calculation – Voltage drop assessment for both MV and LV distribution systems. Earthing Calculation – Assessment of the overall earthing system and grounding requirements. MV Cable Sizing – Verification of MV cable sizes based on current-carrying capacity, voltage drop and short-circuit withstand capacity. Surge Protection Assessment – Selection and verification of suitable surge protection devices (SPDs).

Project ID: 40811269

About the project

8 proposals

Open for bidding

Remote project

Active 9 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

8 freelancers are bidding on average $4,415 SGD for this job

User Avatar
Flag of PAKISTAN

Hello, Electrical engineering support for industrial systems is a core capability of Live Experts LLC, backed by over a decade of technical delivery experience and hundreds of completed projects. Our multidisciplinary team combines electrical, electronics, automation, PLC/SCADA and engineering expertise, making us well suited to comprehensive MV/LV power system studies. I can support your requirements across load flow, short-circuit assessment, transformer rating verification, protection coordination, voltage-drop calculations, earthing, MV cable sizing, harmonic assessment and surge protection. Our experience in industrial automation, manufacturing, embedded systems and control environments helps connect calculations with practical equipment and operational requirements, while our circuit design and electrical engineering skills support technically consistent documentation. Live Experts LLC is ready to deliver a clear, dependable MV/LV study package aligned with the applicable IEEE 519 or equivalent IEC requirements. Choose me for a multidisciplinary engineering team focused on practical, production-ready results. Thanks!

User Avatar
Flag of UKRAINE

Hello, My strength is electrical and circuit design, with a focus on reliable hardware development and engineering documentation. While my profile is primarily centered on PCB and embedded systems rather than dedicated MV/LV power-system studies, I can contribute relevant electronics expertise to reviewing system interfaces, protection-related hardware, transformers, switchgear, and distribution requirements. I work across schematic design, component selection, BOM validation, hardware prototyping, testing, and technical reports, using tools including MATLAB/Simulink, Multisim, and Proteus. This background supports careful assessment of electrical design details, documentation quality, and the relationship between equipment ratings and system requirements. I would be transparent about the limits of my specialist MV/LV study experience while applying my circuit-design expertise wherever it aligns with your scope. I would welcome the opportunity to support this project with accurate electrical engineering documentation and dependable circuit-design input. Thanks!

User Avatar
Flag of UKRAINE

Hi there, Could the study be based on an existing single-line diagram, or should the system model be built from scratch? Also, do you already have utility fault levels and generator data for the harmonic and short-circuit cases? The main task is to turn your MV and LV network into a consistent study model and check it against real operating conditions. I would build the load flow, fault, harmonic, and protection coordination cases in ETAP or DIgSILENT, then verify transformer loading, cable sizing, voltage drop, and SPD selection against the same model. A key risk is mismatched input data between equipment schedules, protection settings, and actual installed ratings. That is usually handled by reconciling the drawings, nameplates, and vendor data first, then iterating the study until the results are stable and defensible. For this scope, the work needs careful validation, clear assumptions, and readable study reports that engineering and operations teams can use. Could the study be based on an existing single-line diagram, or should the system model be built from scratch? can be confirmed early, then the calculations, coordination curves, and recommendations can be delivered in a structured package. Best, Hlib

User Avatar
Flag of UNITED STATES

Hi there, The main requirement is a coordinated MV/LV electrical system study covering harmonics, load flow, fault levels, protection, voltage drop, earthing, cable sizing, transformers, and surge protection at 50 Hz. I have strong hands-on experience in Engineering, Electronics, and Electrical Engineering and have solved similar problems involving distribution-system verification and protection coordination. My approach would be to: * Review the existing single-line diagrams, equipment data, cable schedules, protection settings, and current implementation. * Identify the root cause of any inconsistencies and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using validated MV/LV study models and calculation documentation. * Test edge cases, reliability, performance, security, and integration behavior across normal and fault conditions. * Deploy or integrate the fix without disrupting the existing system. I will check IEEE 519 or equivalent IEC compliance, transformer loading, voltage-drop limits, short-circuit withstand, relay/ACB/MCCB selectivity, and earthing assumptions as one consistent model. Protection coordination must be validated against both maximum fault current and minimum fault current so downstream devices remain selective. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable. I can start by reviewing the sin

User Avatar
Flag of POLAND

✅ Hey Mate✅ , Good morning! I am an expert engineer with skills including Circuit Design, Electronics, Electrical Engineering and Engineering. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅