Licensed electrical engineer: low-voltage cabling for LED lighting systems -- 2
$15-25 USD / hour
Posted 1 minute ago
•
Ends in 6 days
$15-25 USD / hour
We design, manufacture and distribute permanent architectural LED lighting systems that are installed on residential and commercial buildings throughout the United States. To support our continued growth, we are engaging an experienced electrical engineer to independently evaluate and recommend the most suitable wiring solutions for our installations. Our systems operate at 24V and 36V DC and use a three-conductor configuration comprising positive, negative and digital data lines, supplemented by dedicated power-injection runs. These cables are routed through garages, interior walls, attics and soffits before terminating in exterior aluminum lighting tracks. The tracks are mounted both beneath protected roof eaves and along fully exposed rooflines, where they are subject to rain, condensation, prolonged UV exposure and extreme temperature swings. Your primary task will be to identify flexible, stranded-copper cables, ideally 16/3 or 16/4 for combined power and data and 14/2 for power injection. We welcome well-reasoned alternative constructions if they offer superior performance, durability or value. We expect you to research manufacturers and specific products independently rather than relying on a single distributor's catalog. For every recommended cable, you will verify the UL or ETL listing, the applicable cable-type marking and full compliance with NEC Article 725 and its corresponding provisions in the 2023 NEC. You will also confirm each product's suitability for in-wall, attic and wet-location use, along with its moisture resistance and sunlight resistance. In addition, the assessment should document rated operating temperatures, minimum installation temperatures for cold-weather work and overall cable flexibility. Of particular importance is a clear determination of whether our 36V DC circuits in wet, exposed locations remain within Class 2 limits, together with the implications if they do not. Our objective is to standardize on cost-effective products that are readily available in the US, with at least one qualified alternate for each cable category. The final deliverable will be a professional written report presenting the recommended cables with their part numbers, verified certifications, approved applications, suppliers and current pricing. The report should include a side-by-side comparison table as well as links to manufacturer datasheets and certification records. Candidates holding an electrical PE license and proven expertise in NEC Article 725, low-voltage lighting and UL/ETL certification will be given strong preference.
Project ID: 40810819
About the project
5 proposals
Open for bidding
Remote project
Active 10 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
5 freelancers are bidding on average $22 USD/hour for this job


Hello, I am an Electrical and Electronics Engineer with experience in low-voltage electrical systems, power distribution, cable selection, and product development. I am interested in supporting your evaluation and standardization of wiring solutions for your architectural LED lighting systems. I can independently research and compare suitable 16/3, 16/4, and 14/2 stranded-copper cables from multiple US manufacturers, focusing on: - UL/ETL certifications, cable markings, and 2023 NEC Article 725 requirements. - Suitability for in-wall, attic, wet, and outdoor installations. - UV/sunlight resistance, moisture protection, temperature ratings, and flexibility. - 24V/36V DC circuit classification and applicable Class 2 limitations. - Manufacturer specifications, part numbers, availability, and competitive pricing. Deliverables: A professional technical report including recommended cables, qualified alternatives, certification verification, supplier information, pricing, manufacturer datasheets, and a side-by-side comparison table. I will prioritize reliable manufacturer documentation and clearly distinguish verified compliance from items requiring further confirmation. Before starting, I would like to clarify: 1. What are the maximum circuit current and typical cable-run lengths? 2. Which digital communication protocol does your lighting system use? 3. Do you require exclusively UL/ETL-listed products? Best regards


Having successfully designed and implemented low-voltage DC distribution networks for similar architectural lighting projects, I understand the critical balance between performance, safety, and cost-effectiveness required for your 24V and 36V systems. My approach will focus on identifying cabling solutions that minimize voltage drop, ensure signal integrity for your digital data lines, and meet NEC compliance for residential and commercial installations. I propose a multi-faceted evaluation. First, I'll analyze your existing system specifications and installation environments to identify potential challenges like temperature fluctuations, interference, and physical abrasion. Then, I will research and compare UL-listed, low-voltage cables from reputable manufacturers, focusing on conductor gauge, insulation material (e.g., PVC, plenum-rated), and shielding options. My analysis will include calculating voltage drop for various run lengths and load scenarios and assessing the suitability of specific cable types for direct burial, conduit, or aerial installation, considering factors like UV resistance and flexibility. I will also explore options for power injection cable management to ensure robust power delivery. To ensure we align perfectly, what are your primary concerns regarding signal degradation or installation complexity with your current wiring methods? Could you share any specific architectural constraints or environmental factors that have presented challenges in the past? I'm available for a brief call to discuss your project in more detail and outline how I can deliver a comprehensive and actionable wiring solution.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗