Wind Turbine Shaft Vibration Modelling

€8-30 EUR

Posted 1 minute ago

•

Ends in 6 days

€8-30 EUR

Paid on delivery

I need a technically sound yet practical study of a wind-turbine main shaft that pinpoints its vibration and bending behaviour. The core of the job is to build an analytical model—closed-form where possible—then back it up with a finite-element simulation so the theory and the numerics agree. Scope • Develop the governing equations for bending and torsional vibration of the hollow steel shaft, including boundary conditions representative of a hub and gearbox connection. • Extract natural frequencies, mode shapes, critical speed maps and bending stress distributions. • Validate the analytical results in a reputable FEA environment (ANSYS, Abaqus, or an equivalent tool you are comfortable with). • Extend the study to a fatigue check under normal operational torque and bending loads only; no need to cover start-up or gust scenarios at this stage. Deliverables – A concise technical report (PDF) outlining assumptions, derivations, results, and engineering conclusions. – Native calculation files or notebooks (MATLAB, Python, or Mathcad). – FEA model files, mesh, material cards and post-processing plots. Acceptance criteria The analytical and simulation frequencies should agree within ±5 %, and stress predictions within ±10 % for the first three bending modes. Any divergence must be explained. When you reply, attach a detailed project proposal that walks me through your methodology, expected timeline, and past experience with rotor or shaft dynamics—this will be the key factor in selecting the freelancer.

Project ID: 40810619

About the project

10 proposals

Open for bidding

Remote project

Active 5 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

10 freelancers are bidding on average €63 EUR for this job

User Avatar
Flag of UKRAINE

Hi there, How is the shaft connected at the hub and gearbox side: should the supports be treated as rigid, flexible, or with bearing stiffness? Do you already have shaft geometry, material data, and operational load values for torque and bending? The main challenge is to keep the analytical model realistic enough to match the FEA while still staying closed-form where possible. I would start with Euler-Bernoulli or Timoshenko beam equations for the hollow shaft, add torsional vibration, then build a consistent load case and boundary condition set for the hub and gearbox interfaces. A key risk is mode mismatch between the theory and the FE model if the connection stiffness, element choice, or mass distribution is not aligned. That is usually handled by checking sensitivities on boundary conditions, section properties, and mesh density until the first three bending modes converge within the target limits. For the study, the report will cover derivations, assumptions, critical speed maps, bending stress results, and a fatigue check under normal operating loads only. The numerical work can be carried out in ANSYS, Abaqus, or a comparable tool, with MATLAB or Python used for the analytical calculations and result comparison. A clear workflow for validation and post-processing will make the divergence easy to explain if any appears. Best, Hlib

User Avatar
Flag of INDIA

can start right now I have checked the details. I can handle this hollow steel shaft analysis by setting up the closed-form bending and torsional governing equations with hub and gearbox boundary conditions, then matching them against an ANSYS FEA model to hit your ±5% frequency and ±10% stress agreement targets. I will also run the steady-state operational fatigue check and package up the MATLAB/Python scripts, native FEA files, and the PDF report. Quick question: do you have a preferred tool between MATLAB and Python for the analytical calculations and notebook delivery? let do it, and I will include the full methodology, timeline, and rotor dynamics background in my attached proposal.

User Avatar
Flag of UKRAINE

Hi, I hope you’re doing well. I can help develop the analytical and numerical study for your wind-turbine main shaft, with a clear focus on bending and torsional vibration, critical speeds, and fatigue under operating torque and bending loads. I have experience with Python, and I would suggest building the calculation workflow so the derivations and checks stay transparent and easy to validate against the FEA results. I would start by setting up the governing equations, shaft properties, and boundary conditions for the hub and gearbox connections, then derive the natural frequencies, mode shapes, and stress distributions. In parallel, I would build the finite-element model in ANSYS, Abaqus, or an equivalent tool, matching material properties, constraints, and mesh refinement so the analytical and simulation results can be compared directly. I’d also document any differences clearly and check fatigue using the operational load case only. My process would be to review the assumptions, build the calculation notebook, implement the FEA model, and then compare the first three bending modes against your acceptance criteria. After that, I would prepare the technical report, native calculation files, and post-processing plots, along with notes on the modelling setup and key findings. I’d also be happy to help with fixes, updates, and ongoing maintenance as your needs grow. Best regards, Ruslan

User Avatar
Flag of UNITED KINGDOM

Your main shaft needs a dual-track approach: rigorous closed-form equations validated against finite-element results, with quantified divergence so you know where simplifications live. I'll start by building the governing equations for a hollow shaft under combined bending and torsion, applying boundary conditions that reflect your hub and gearbox interface. Once the natural frequencies and mode shapes are extracted analytically, I'll build an equivalent FEA model in ANSYS or Abaqus, mesh it carefully, and run modal and stress analysis. The comparison, within your ±5% frequency and ±10% stress tolerance, becomes the foundation for your fatigue check under operational loads. Deliverables include a technical report with clear assumptions and derivations, working code in MATLAB or Python for the analytical model, and complete FEA files with material properties and post-processing plots. I've worked on rotor dynamics for industrial compressors and generator shafts; the methodology transfers directly to wind turbines, though your scale and loading regime may demand close attention to connection details and damping representation. Regards, MISS -

User Avatar
Flag of POLAND

✅ Hello there✅ , Good evening! I am skilled engineer with skills including Python, Abaqus, Finite Element Analysis, Mechanical Engineering, MATLAB, Ansys, Statistical Analysis and Matlab and Mathematica. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,

User Avatar
Flag of DENMARK

Hello, My strongest match for this project is my MATLAB and Python capability, which supports reproducible analytical calculations, numerical modelling, data processing, and clear technical visualisation. I can develop calculation scripts or notebooks for the hollow shaft’s bending and torsional vibration equations, modal results, critical-speed plots, stress distributions, and fatigue calculations under the specified operational loads. My background is in practical computational development, including image processing, algorithm implementation, testing, and optimisation. That experience translates well to building maintainable engineering calculations, checking results systematically, and presenting comparisons between analytical predictions and numerical outputs. I can also organise the technical report, native MATLAB/Python files, and post-processing plots clearly; however, my profile does not specifically document prior rotor-dynamics work or hands-on ANSYS/Abaqus experience, so I would not overstate that part of my background. I would be glad to apply my MATLAB/Python modelling skills to this study and provide a structured, technically transparent deliverable. Thanks!

User Avatar
Flag of PHILIPPINES

Hi , Good morning! I am skilled electronics engineer with skills including Abaqus, Mechanical Engineering, Matlab and Mathematica, Statistical Analysis, MATLAB, Ansys, Finite Element Analysis and Python. Please send a message to discuss more regarding this project. Many thanks

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅