Mini PWM Motor BMS PCB
$30-250 USD
Posted 1 minute ago
•
Ends in 6 days
$30-250 USD
Paid on delivery
I need a custom PCB that keeps everything for my project on one tiny board: a PWM driver for a small N20 DC motor, full Li-ion BMS, USB-C charging and the simple interface of an on/off switch plus two LEDs (one to show the board is on, one for charge status). The motor speed must be adjustable with a little onboard knob, not fixed. Power will come from a single 3.7 V 18650 cell, so the battery management section has to cover charge, over-charge, over-discharge and short-circuit protection while sharing the USB-C port with the charger. Efficiency and footprint are both important; every square millimetre you can save counts. I’m comfortable testing, but I need you to give me manufacturing-ready files and clear guidance for assembly. Deliverables • Schematic with labeled blocks for PWM stage, BMS/charger and user interface • Compact PCB layout (Gerber, drill, pick-and-place, 3D STEP) ready for JLCPCB/PCBWay upload • Complete, in-stock BOM with part numbers and footprints • Brief assembly/bring-up notes, including potentiometer value for the speed range and how the LEDs are wired to indicate power and charge states I work in KiCad, but Altium or Eagle is also fine as long as exports are provided. Let me know your preferred tool chain, any component lead times I should be aware of, and how small you expect the final board to be. (Side note, if you can figure out how to wire in a small finger trigger to control speed same as the potentiometer for precise control instead of a micro switch that would also be helpful)
Project ID: 40810541
About the project
16 proposals
Open for bidding
Remote project
Active 12 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
16 freelancers are bidding on average $141 USD for this job


Hello, Over 15 years in electronic engineering, including production-focused PCB design with KiCad, Altium Designer and Eagle, directly matches your need for a compact, manufacturing-ready motor board. I can design the integrated PWM motor driver, single-cell Li-ion charger/BMS protection and switch/LED interface while keeping the footprint and efficiency in focus. My experience spans complex PCB layouts, embedded systems and consumer, automotive and industrial electronics, supported by circuit simulation with LTspice and MATLAB/Simulink. I will provide the schematic, compact layout exports, Gerber, drill, pick-and-place and 3D STEP files, along with a complete component/footprint BOM and clear assembly and bring-up notes. The adjustable speed control can be designed around the onboard potentiometer, with the finger-trigger alternative evaluated as a practical analogue control input. I am ready to deliver this in KiCad or an equivalent toolchain with manufacturing-ready exports and careful component selection. Choose me to turn your requirements into a compact, reliable PCB ready for assembly. Thanks!


Hello, An experienced electronics and PCB design engineer with 10+ years in hardware development, power electronics, motor integration, and manufacturing documentation, I can develop your compact single-cell motor board from schematic through production-ready files. My background in component selection, PCB layout, DFM, prototyping, testing, troubleshooting, and small-batch production directly matches your need for a reliable PWM motor stage, Li-ion charging/protection, USB-C, LEDs, switch, and adjustable speed control. I can work in KiCad and provide the required schematic, compact layout, Gerbers, drill files, pick-and-place, 3D STEP, complete BOM with footprints and part numbers, plus assembly and bring-up notes. My experience with analog/digital electronics, power supplies, electrical protection, motor and actuator integration, and 3D CAD supports careful footprint optimization and mechanical fit. I can also evaluate a finger-trigger speed input as an alternative potentiometer interface while keeping the design practical and manufacturable. Choose me for end-to-end electronic product development with clear manufacturing documentation and a design focused on efficiency, protection, and minimal board area. Thanks!


Hey, the main design challenge is fitting the motor driver, single-cell Li-ion protection, USB-C charging and adjustable speed control onto one compact PCB without compromising thermal performance or battery safety. I'd approach this in KiCad, separating the PWM motor stage, charging and protection circuitry, and user interface into clearly labelled schematic blocks. The layout would prioritise short motor-current paths, appropriate MOSFET ratings, thermal management, USB-C charging connections and accessible test points. I'd also include the manufacturing exports, 3D STEP model, BOM and assembly/bring-up documentation. The finger-trigger idea is worth exploring: a small linear potentiometer or Hall-effect position sensor could provide proportional speed control instead of a simple microswitch, while retaining the onboard potentiometer as an alternative or calibration control. Could you share the N20 motor's rated voltage and stall current, so the driver and protection components can be selected appropriately? Best Regards, Muskan.


Your single-board motor controller needs both compact PCB design and careful power engineering, which aligns directly with my 8+ years in electronics, power electronics, embedded systems, and PCB layout. I design hardware from circuit concept through simulation, validation, documentation, and final implementation, with reliability and safety in mind. I can develop the KiCad design around the N20 PWM motor stage, single-cell Li-ion charging and protection, USB-C power input, switch, status LEDs, and onboard speed control. My circuit-design and PCB-layout experience is well suited to minimizing the footprint while keeping the design practical for JLCPCB or PCBWay manufacturing. I can also evaluate the finger-trigger concept as an analog speed-control input alongside the potentiometer, and document the selected value and wiring. You will receive the labeled schematic, compact layout, manufacturing exports, BOM with footprints and part numbers, 3D STEP model, and concise assembly and bring-up notes. I will use KiCad and provide the complete production package in the requested formats. Choose me to develop a robust, manufacturable board for your motor and battery system.


Hi , Good evening! I’ve carefully checked your requirements and really interested in this job. I’m a skillful mechanical engineer by using 3D CAD Software. I’m offering best quality and highest performance at lowest price. I can complete your project on time and your will experience great satisfaction with me. I’m well versed in Solidworks, AutoCAD, CAD/CAM, Electronics, Circuit Design, Electrical Engineering, Embedded Systems, PCB Layout and Prototyping and several 3D CAD Software. I have rich experienced in Industrial & Mechanical design. For more information about me, please refer to my portfolios. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details.. Thanks


Hi there, Can the USB-C port be power-only with no data path, and do you want the trigger input to replace the potentiometer or act as a second control source? Which exact motor current, LED behavior, and target board size should I design around for the first revision? The main challenge is fitting PWM drive, Li-ion protection, and USB-C charging onto one very small PCB without hurting thermal margin or battery safety. A clean approach is to split the design into clear blocks in KiCad, then size the MOSFET, charger, and protection parts around the N20 motor current and a single-cell 18650 charge path. One risk is noise from the motor affecting charge detection and protection logic. That can be handled with short high-current traces, solid ground return, input filtering, and careful placement of the charger, sense parts, and switch node away from the USB and LED lines. For the speed control, a potentiometer can be mapped to an analog PWM setpoint, and a finger trigger can be wired the same way if you want a more tactile control. After schematic and layout, I can prepare Gerbers, pick-and-place, STEP, and an in-stock BOM, plus assembly notes and bring-up guidance for JLCPCB or PCBWay. Best, Hlib


Hello, My Electrical Engineering background and CAD/CAM skills enable me to produce clear, coordinated technical design documentation for compact hardware projects. Your mini motor board requires careful integration of the PWM motor driver, single-cell Li-ion charging and protection, USB-C power, switch, LEDs, and adjustable speed control within a constrained footprint. I can develop the schematic and PCB documentation with clearly labeled functional blocks, component footprints, and manufacturing outputs suited to your preferred fabrication workflow. My engineering experience across multidisciplinary projects also supports disciplined coordination, design review, and practical assembly documentation. The optional finger-trigger control can be addressed as an alternate speed-input concept alongside the onboard potentiometer, subject to the selected circuit architecture. I would be glad to apply my Electrical Engineering and CAD/CAM expertise to create a compact, well-documented board package with the required fabrication and assembly files. Thanks!


Respected Client, Your project " Mini PWM Motor BMS PCB " deserves more than just good design — it deserves a creative touch that makes it stand out! At Canvas & Core, we blend 9+ years of design expertise with creativity, precision, and passion to turn ideas into impressive results. Expect Premium Quality, Clear Communication, and Unlimited Revisions until you're absolutely delighted. Your vision is our canvas. Let's create something amazing together! Best Regards, Canvas & Core


✅ Hi, there! ✅ You’re looking for a single ultra-compact mini PCB that combines an adjustable PWM driver for an N20 motor, a full Li-ion BMS with protections, and USB-C charging plus a simple on/off + LEDs interface. For this kind of mixed power/BMS + control board, I work from first-principles schematic design through manufacturing-ready exports (KiCad-ready, and I can also deliver Altium/Eagle exports if you prefer). ✔ My deliverables for you will be: * Schematic with clearly labeled PWM, BMS/charger, and UI blocks * Compact PCB layout with Gerbers, drill, pick-and-place, and 3D STEP for JLCPCB/PCBWay upload * In-stock BOM with part numbers and footprints sized for minimal area * Assembly/bring-up notes (including potentiometer value/speed range and exact LED wiring for power + charge) Best regards, Mike


Hi there, Your main challenge is consolidating an adjustable N20 motor PWM driver, single-cell Li-ion charging and protection, USB-C power, status LEDs, and the switch interface onto one compact, manufacturing-ready PCB without compromising safety or efficiency. I have strong hands-on experience with Engineering, Electronics, Manufacturing, and Electrical Engineering, and have solved similar problems involving compact power electronics, motor control, and production-ready PCB documentation. My approach would be to: * Review the electrical requirements, motor load, battery limits, enclosure constraints, and preferred manufacturing process. * Identify the root design requirements and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using KiCad, including the PWM stage, BMS/charger, USB-C input, protection, LEDs, switch, and adjustable control. * Test edge cases, reliability, performance, security, and integration behavior, including charge faults, motor startup current, short-circuit protection, and thermal margins. * Deploy or integrate the fix without disrupting the existing system by providing Gerbers, drill files, pick-and-place, STEP, BOM, and assembly/bring-up notes. The finger-trigger option should be evaluated as an analog control input with suitable filtering and protection, while preserving the potentiometer fallback and stable PWM behavior across the usable battery voltage range. I prefer fixing the actual
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗