QCC3095 DSP Firmware: EQ & Limiter

€250-750 EUR

Posted 1 minute ago

•

Ends in 6 days

€250-750 EUR

Paid on delivery

I need a working firmware build for the Qualcomm QCC 3095 DSP that enables every available equalizer block and adds a two-band brick-wall limiter to the Bluetooth music playback path only. The signal should first pass through a 2nd-order high-pass and low-pass filter, be split into two bands, and then feed its own limiter instance. I want the split frequency to be fully adjustable later inside the standard Qualcomm tuning tools, so please expose that parameter accordingly. Inside those same tools I still need all of Qualcomm’s stock EQ controls, plus an extra set of independent controls for each of the two limiter bands. You do not have to perform the tuning; my team will handle that after we flash and verify the build. Deliverables • Compiled firmware image ready for flashing to QCC 3095 • All source or patch files required to rebuild the project in Qualcomm ADK/SDK • A brief implementation note that lists the signal-flow block diagram, the newly exposed parameters, and how to access them from the Qualcomm tools I will test by loading the image, confirming the processing path in the tuning software, and checking that both limiter bands operate independently with an adjustable crossover point.

Project ID: 40810227

About the project

19 proposals

Open for bidding

Remote project

Active 6 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

19 freelancers are bidding on average €509 EUR for this job

User Avatar
Flag of PAKISTAN

Hello, Digital Signal Processing, C programming, and embedded-systems expertise make me well suited to implement this QCC3095 audio firmware customization. My background spans more than a decade of technical delivery across embedded systems, electronics, and automation, with a practical focus on production-ready solutions. I can contribute the DSP and C skills needed for the Bluetooth music playback path: preserving Qualcomm’s stock EQ controls, adding the two-band limiter processing, exposing independent band parameters, and making the crossover frequency available through the standard tuning workflow. My embedded and electronics experience also supports the compiled flashing image, rebuildable source or patch files, and concise implementation documentation covering the signal flow and exposed controls. I would be pleased to deliver a clear, verifiable QCC3095 firmware package that your team can flash, inspect, and tune confidently. Thanks!

User Avatar
Flag of PAKISTAN

Hi, I understand you need a working QCC3095 firmware build where the Bluetooth music path runs through stock EQ, a split adjustable from Qualcomm tuning tools, and two independent brick-wall limiter bands. I will implement the signal flow with the 2nd-order high-pass and low-pass filters, expose the crossover and limiter controls, preserve Qualcomm’s existing EQ controls, and provide the flash-ready image, rebuildable source or patch files, and a clear implementation note. I will use C Programming and Electronics knowledge for the DSP changes, keep the work tracked with Git, and make the firmware easy for your team to tune and verify in the standard Qualcomm tools. Which Qualcomm ADK/SDK version and existing QCC3095 project or firmware baseline should I use for the implementation? Please start chat and let’s discuss the ADK/SDK version, current project files, and build setup.

User Avatar
Flag of UKRAINE

Hello, My 15+ years in embedded firmware engineering and strong C programming background align well with implementing DSP audio processing for the QCC3095. I develop reliable embedded systems across consumer electronics and other demanding industries, with experience taking firmware projects from concept through production. The requested firmware build, rebuildable Qualcomm ADK/SDK source or patches, and implementation note require disciplined embedded development and clear technical documentation. My C/C++ and embedded-systems expertise supports the EQ, crossover, and independent limiter integration, while my MATLAB/Simulink experience is relevant to signal-processing design and verification. I will keep the Bluetooth music playback path isolated and document the signal flow and exposed tuning parameters clearly for your team. I am ready to apply my firmware and electronics experience to deliver a practical QCC3095 DSP implementation and supporting build materials. Thanks!

User Avatar
Flag of UKRAINE

Hello, Embedded firmware development is central to my work, with hands-on experience in Embedded C/C++, wireless systems, and product-level electronics. That background aligns well with implementing DSP signal processing in a Bluetooth audio path and delivering rebuildable firmware assets rather than only a design concept. My embedded-systems expertise supports the required EQ, crossover, and limiter integration, while my experience with MATLAB/Simulink and engineering documentation is relevant to defining the signal flow and documenting exposed parameters for Qualcomm tuning tools. I can provide the compiled QCC3095 firmware image, source or patch files needed for an ADK/SDK rebuild, and a concise implementation note covering the processing blocks, adjustable crossover, and independent limiter controls. I am ready to apply my firmware and electronics experience to this DSP build and deliver an implementation your team can flash, inspect, and tune. Thanks!

User Avatar
Flag of UKRAINE

Hello, My 10+ years in embedded systems and electronics development give me a strong foundation for integrating and validating DSP firmware in a real product environment. I work across complete development cycles, from system architecture and embedded control through testing, troubleshooting, commissioning, and documentation, so I can support the QCC3095 implementation with a practical focus on a flashable, verifiable build. My embedded systems experience covers microcontrollers, wireless communication, analog and digital electronics, and end-to-end product testing. For this project, I can apply that background to the Bluetooth music playback path, preserve Qualcomm’s stock EQ controls, expose the adjustable crossover and independent limiter-band controls through the tuning interface, and provide the required rebuild files and implementation note. I will keep the deliverables focused on the compiled image, source or patches, signal-flow documentation, and parameter access details your team needs for tuning and verification. I would be glad to take responsibility for this DSP firmware integration and deliver a clear, testable package for your QCC3095 evaluation. Thanks!

User Avatar
Flag of COLOMBIA

My 8+ years in embedded firmware development and electronics engineering make me well suited to implement and integrate DSP processing for the QCC3095 playback path. I work with C/C++ embedded systems and have taken electronic projects through design, simulation, validation, documentation, and final implementation, which aligns well with your need for a rebuildable firmware image and clear implementation notes. I can apply these skills to the Qualcomm ADK/SDK source or patch structure, preserve the stock EQ controls, and expose the adjustable crossover and independent two-band limiter controls through the standard tuning tools. My experience in system integration and troubleshooting is also relevant to verifying that the processing remains limited to Bluetooth music playback and that both limiter bands operate independently. I would be glad to deliver the firmware build, rebuild-ready source or patches, and concise signal-flow and parameter documentation for your QCC3095 validation process.

User Avatar
Flag of UNITED STATES

Hi there, The QCC3095 DSP firmware must preserve Qualcomm’s full stock EQ path while adding a music-playback-only two-band brick-wall limiter with an adjustable crossover exposed in the standard tuning tools. I have strong hands-on experience with C Programming, Programming, and Electronics, and have solved similar problems involving embedded signal-processing pipelines and parameterized firmware integrations. My approach would be to: * Review the existing QCC3095 firmware, Qualcomm ADK/SDK configuration, DSP graph, and current tuning-tool parameter definitions. * Identify the root cause and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using C Programming within the Qualcomm DSP signal path, including the 2nd-order high-pass/low-pass split and independent limiter controls. * Test edge cases, reliability, performance, security, and integration behavior across music playback, bypassed paths, crossover settings, and limiter-band operation. * Deploy or integrate the fix without disrupting the existing system, delivering a flashable image, rebuildable source or patches, and implementation notes. The limiter must be inserted only on the Bluetooth music playback route, while parameter IDs and tuning metadata remain stable and clearly exposed for later adjustment. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable. I can sta

User Avatar
Flag of VIETNAM

Hello. "BUILD A TWO-BAND LIMITER DIRECTLY INTO THE QCC3095 BLUETOOTH AUDIO PATH" - The main challenge is preserving Qualcomm’s existing EQ controls while adding independent limiter processing without affecting other audio paths. I would first review the available Qualcomm ADK/SDK, existing DSP configuration, and tuning-tool support to confirm the correct implementation approach. The proposed signal flow would include the second-order high-pass and low-pass filters, adjustable crossover, and separate limiter instances for the two bands. I would preserve the stock EQ controls, expose the crossover and independent limiter parameters through the supported tuning interface, and provide the firmware image, rebuildable source or patches, and implementation notes. Before committing to the firmware build, I would need to verify SDK access, supported DSP blocks, and the available flashing and testing setup. These details are essential for delivering a build that can actually be flashed and tuned. Which Qualcomm ADK/SDK version and existing firmware project are you using? Looking forward to working with you.

User Avatar
Flag of INDIA

Hello Sir, I can deliver a robust firmware build for the Qualcomm QCC 3095 DSP that includes all equalizer blocks and a two-band brick-wall limiter for Bluetooth music playback. My approach involves implementing the 2nd-order high-pass and low-pass filters, adjustable crossover frequency, and ensuring all controls are accessible in Qualcomm's tuning tools. I am ready to start right away. What specific frequency range do you envision for the limiter bands? Thanks, Deepak

User Avatar
Flag of SERBIA

I can implement the QCC3095 DSP firmware changes for the Bluetooth music playback path, preserving Qualcomm’s stock EQ controls while adding a configurable two-band limiter architecture. The implementation will include: • 2nd-order high-pass and low-pass filtering before the split • Adjustable crossover frequency exposed through Qualcomm’s standard tuning tools • Independent limiter instances and controls for both frequency bands • No processing changes to unrelated audio paths • A flash-ready compiled firmware image • Rebuildable source or patch files compatible with your Qualcomm ADK/SDK • A concise implementation note documenting signal flow, exposed parameters, and tuning-tool access I’ll structure the parameter mappings so your team can perform final tuning after flashing, then verify the playback path, crossover adjustment, and independent operation of both limiters. The deliverables will be organized for straightforward build, flash, and validation.

User Avatar
Flag of UKRAINE

Hi there, Does the QCC3095 project already have an ADK/SDK base that builds cleanly, and which Qualcomm tuning tool version should the controls target? Should the crossover be exposed as a single tunable parameter with a fixed range, or mapped to an existing DSP control type? The main task is to place the playback-only path through EQ, then a split crossover stage, and finally two independent brick-wall limiter branches before recombining. That usually means touching the DSP graph, exposing the parameters through the standard metadata layer, and keeping the stock EQ controls intact while adding the new limiter band controls. One risk is parameter visibility in the Qualcomm tools, because a block can work in firmware yet still not appear correctly for tuning. I would handle that by wiring the crossover and limiter gains into the same tool-facing schema used by the native EQ blocks, then verifying names, ranges, and update paths in the image build. After the build is flashing, the next step is checking signal flow, confirming the crossover is adjustable, and making sure both limiter bands react independently under test tones and music playback. The handoff will include the source or patch files and a short note with the block diagram, exposed parameters, and where they live in the tool chain. Best, Hlib

User Avatar
Flag of INDONESIA

Your QCC3095 music path needs two independent limiter bands with a crossover you can change later in the Qualcomm tuning tools, and that is what I'll build. I can do this for you, including the flashable image, the rebuild files and the short note on the new parameters. I'll stay on it until the build behaves the way you expect when you test it. Which ADK version are you building against right now? I'll make sure the processing path and both limiter bands are easy for you to check in the tuning software. Sela

User Avatar
Flag of PHILIPPINES

Hello, "QCC3095 TWO-BAND BRICK-WALL LIMITER INTEGRATION" - I think your goal is to extend Qualcomm's existing DSP playback chain without losing any stock EQ functionality or affecting other audio paths. I'd approach this by first reviewing the QCC3095 ADK/SDK configuration and existing Bluetooth music processing graph. I'd then integrate the second-order high-pass and low-pass crossover, route the resulting low and high bands into independent limiter instances, and expose the crossover frequency and individual limiter parameters through the standard Qualcomm tuning interface. I'd preserve the existing EQ controls and ensure the new processing is restricted to Bluetooth music playback only. After integration, I'd check parameter visibility, signal routing, independent band control, and build compatibility. Delivery would include the compiled flashable firmware, rebuildable source patches, and an implementation note documenting the signal flow and tuning parameters. Looking forward to work with you. Thanks.

User Avatar
Flag of BRAZIL

Hello, A QCC3095 build that preserves Qualcomm stock EQ controls while adding a music playback only two band brick wall limiter needs careful DSP graph integration and tuning tool exposure. The key risk is not merely compiling firmware, but ensuring the high pass and low pass filters, adjustable crossover, independent limiter instances, and existing EQ blocks appear correctly in the standard Qualcomm tools. I would implement the signal flow, expose the split frequency and limiter controls through the appropriate parameter definitions, then provide the flashable image, rebuildable ADK or SDK source changes, and an implementation note with the block diagram and tool access details. I will also verify that the limiter bands remain independently controllable without affecting other Bluetooth paths. My background includes C Programming and Artificial Intelligence, with Typescript and React Native experience supporting clear tooling and documentation when needed. The deliverables will be organized for straightforward flashing, review, and later tuning by your team. Gabriel

User Avatar
Flag of PHILIPPINES

Hello Mate!Greetings , Good morning! I am skilled electronics engineer with skills including C Programming, Embedded C++, Electronics, Digital Signal Processing, Firmware Development and Embedded Systems. Please send a message to discuss more about this project. Have a great time

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅