Custom Motor Control PCB Design

$10-30 USD

Posted 1 minute ago

•

Ends in 6 days

$10-30 USD

Paid on delivery

I need a brand-new printed circuit board engineered from the ground up that will reliably drive and manage small-to-medium motors or pumps. The board’s sole purpose is motion control, so component choices, trace widths, and thermal management should all reflect the inrush currents and back-EMF typical of motor loads. Core expectations • Schematic capture and PCB layout, ready for fabrication • Bill of Materials with part numbers in stock at major suppliers • Manufacturable Gerber files, drill files, and pick-and-place data • Basic firmware pin mapping (if a microcontroller is included) • A quick design note highlighting motor-driver selection, protection features, and test points I’m flexible on CAD tools—Altium Designer, KiCad, or Eagle are all fine—as long as the final files are industry-standard. The finished board should fit within a 100 mm × 80 mm envelope and run from a single 12 V rail; please allow headroom for up to 5 A continuous per channel. To wrap up the project, I’ll review the schematic and 3D layout, then sign off once the Gerbers pass a quick DFM check.

Project ID: 40809486

About the project

5 proposals

Open for bidding

Remote project

Active 5 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

5 freelancers are bidding on average $23 USD for this job

User Avatar
Flag of UKRAINE

Hello, Over 15 years in electronic hardware and firmware engineering makes me well suited to develop your motor-control PCB from concept through fabrication-ready output. I specialise in complex circuit design and PCB layouts using Altium Designer, KiCad, and Eagle, with experience serving industrial automation, automotive, medical, and aerospace applications. Your requirements align closely with my circuit design, electrical engineering, embedded systems, and PCB layout expertise. I can produce the schematic, compact 100 × 80 mm layout, fabrication Gerbers, drill files, pick-and-place data, supplier-ready BOM, and firmware pin mapping where a microcontroller is used. My background with ARM Cortex, STM32, AVR, ESP32, C/C++, and LTspice also supports thoughtful driver selection, protection, thermal considerations, and validation of the 12 V motor-load design. I will deliver clear design documentation, practical test points, and a professional 3D PCB layout ready for your DFM review. Choose me to develop a reliable, manufacturable motor-control board tailored to your application. Thanks!

User Avatar
Flag of PAKISTAN

Greetings Dear Hiring Manager I can design your 12 V motor control PCB with high current drivers protection and thermal optimization 1. How many motor channels are required? 2. Are the motors brushed DC or brushless? 3. Is 5 A continuous required per channel? 4. Do you need PWM speed and direction control? 5. Is a microcontroller required on the board? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat

User Avatar
Flag of UKRAINE

Hi there, What motor types and control method do you need on the board, and how many channels should be supported? Do you want discrete MOSFET stages or an integrated driver, and is current sensing required per channel? The main challenge is to keep 12 V power clean and stable while handling 5 A continuous load and startup spikes. A good approach is to build the power stage around a driver that fits the motor type, then place wide copper paths, proper decoupling, flyback protection, and clear test points around the high-current loop. One risk is thermal buildup near the switching devices and connector area, especially inside a compact 100 mm by 80 mm board. That can be handled with careful copper area planning, via stitching, and layout rules that keep the noisy return current away from logic and signal lines. The work can cover schematic, PCB layout, BOM with stocked parts, Gerbers, drill files, and pick-and-place data. If a microcontroller is included, I can also map the firmware pins and note the key bring-up checks, then review the layout and DFM details with you before release. Best, Hlib

User Avatar
Flag of UNITED KINGDOM

For 12 V motor loads at 5 A per channel, the main things are the driver choice, wide copper for current, and proper flyback and TVS protection against back-EMF. I'll design a 2-channel H-bridge board with an STM32 inside your 100x80 mm outline, in Altium or KiCad, whichever you prefer. You'll get schematic, layout, Gerbers, drill, pick-and-place, BOM with in-stock parts, pin mapping and a short design note. I've built motor driver and power boards before, and some are in my portfolio. Do you need DC brushed motors or brushless?

User Avatar
Flag of PHILIPPINES

Hi , Good afternoon! I am an expert electronics engineer with skills including Altium Designer, PCB Layout, Circuit Design, Firmware Development, Electronics, Electrical Engineering, Motor Control and Embedded Systems. Please contact me to discuss more regarding this project. Hope to hear from you soon

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅