Low-Power LoRaWAN Wearable Hardware Design

$1500-3000 USD

Posted 1 minute ago

•

Ends in 6 days

$1500-3000 USD

Paid on delivery

TITLE: Hardware design for low-power LoRaWAN device (STM32WL, 915 MHz, KiCad) DESCRIPTION: I'm developing a low-power LoRaWAN wearable device and I'm looking for an experienced electronics engineer to handle the complete hardware design. I handle firmware, backend and field testing myself. Scope: - Schematic and PCB layout in KiCad (likely 4 layers) - 915 MHz RF design around an STM32WL (integrated LoRa), with external antenna - GPS module and a few I2C sensors - Ultra-low-power design on a primary (non-rechargeable) cell, with switchable power domains - A high-voltage pulse output stage with a hardware-level fail-safe - Manufacturing-ready files for JLCPCB SMT assembly: Gerbers, BOM with LCSC part numbers, pick & place, assembly drawings - Short design rationale document explaining key decisions - Support during bring-up of the first prototypes Requirements: - Proven experience with sub-GHz RF layout (LoRa or similar), with examples you can share - Experience with ultra-low-power battery devices - Experience with high-voltage circuits is a strong plus - Fluent in KiCad - Good communication in English or Spanish A detailed specification will be shared with shortlisted candidates after signing an NDA. In your bid, please include: 1. 1-2 similar projects you've done (sub-GHz RF, low power, HV) 2. Estimated price and timeline, ideally split by milestone (schematic → layout → final files) 3. How many revision rounds are included 4. What kind of support you offer if the first prototypes have design errors Please start your bid with the word "LoRa" so I know you read the full post. Generic copy-paste bids will be ignored.

Project ID: 40809224

About the project

9 proposals

Open for bidding

Remote project

Active 8 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

9 freelancers are bidding on average $2,339 USD for this job

User Avatar
Flag of PAKISTAN

Hi, LoRa , I understand you need a complete low-power wearable board built around STM32WL at 915 MHz, with GPS, I2C sensors, switched power domains, and a safe high-voltage pulse stage. I can handle the Electronics and Electrical Engineering work from the KiCad schematic through PCB Layout, while keeping the design ready for JLCPCB assembly. I would first review the specification, battery and pulse requirements, then complete the schematic, RF and power review, four-layer layout, DRC checks, and manufacturing files including Gerbers, BOM, LCSC numbers, pick-and-place, and assembly drawings. I can also provide a short design note, revision rounds, and practical support during first prototype bring-up. My estimated plan is 35 days: schematic, layout, review, and final production files in clear milestones. Could you share the expected high-voltage pulse voltage, current, duration, and required hardware fail-safe behavior?. Please start chat and let’s discuss the NDA, requirements, and prototype plan.

User Avatar
Flag of UKRAINE

Hello, LoRa Over 15 years in electronic engineering, I design complex PCB layouts and embedded IoT hardware using KiCad, STM32 and ARM Cortex platforms, directly matching your need for an STM32WL wearable board with integrated LoRa, sensors and manufacturing-ready documentation. My experience spans complete product development across consumer, medical, industrial, automotive and aerospace electronics, including PCB design and layout, STM32 systems, I2C, SPI, UART and low-level hardware integration. I can provide the KiCad schematic and layout, production files, BOM, pick-and-place data, assembly drawings and design rationale required for JLCPCB SMT assembly. My background also includes LTspice and MATLAB/Simulink for evaluating power and circuit behaviour, while clear communication in English supports effective prototype bring-up. I can structure the work around schematic, PCB layout and final manufacturing files, with revision rounds and prototype-support terms defined clearly before starting. I would be pleased to apply my hardware design experience to your low-power LoRaWAN device and discuss the project further. Thanks!

User Avatar
Flag of UKRAINE

Hello, LoRa expertise combined with 10+ years in electronics and PCB development makes me well suited to your STM32WL wearable hardware. My background covers schematic design, component selection, multilayer PCB layout, low-power electronics, STM32, sensors, I2C, wireless communication and LoRaWAN, from concept through prototyping, troubleshooting and manufacturing documentation. I can handle the KiCad hardware design and prepare production documentation including Gerbers, BOM, footprints, assembly files and design rationale. My experience with industrial electronics, power electronics, machine safety and control systems is also relevant to your high-voltage pulse stage and hardware fail-safe requirements. I have supported complete product development cycles through prototype testing, debugging, commissioning and small-batch production, which fits the bring-up support you need. For the milestone estimate, I would propose pricing and timing split across schematic, PCB layout, and final manufacturing files after reviewing the specification under NDA. I will define revision rounds clearly in the milestone scope and provide practical support during prototype bring-up, including troubleshooting and design corrections where needed. I would be glad to deliver this hardware professionally from architecture through manufacturing-ready files. Thanks!

User Avatar
Flag of UKRAINE

LoRa Hi there, Which exact GPS module and high-voltage pulse requirements are already fixed, and do you want the antenna matched for a specific enclosure? Are there any hard limits for standby current, battery chemistry, or peak pulse timing that should drive the power tree? The main challenge is balancing RF performance, ultra-low power, and safe HV switching in one wearable board. A practical flow is to build the schematic first around STM32WL, clean power domains, RF matching, and sensor interfaces, then move into a controlled 4-layer layout in KiCad with return paths, grounding, and creepage rules handled early. The biggest risk is usually RF detuning and noise coupling from the HV stage into the sub-GHz section. That can be managed with partitioned placement, filtered domain switching, careful antenna feed routing, and a fail-safe hardware interlock that defaults to a safe state on reset or fault. Shortlisted work can be split into schematic, layout, and manufacturing files, with review at each step. For bring-up, support should cover schematic-level troubleshooting, ECOs for first prototypes, and fast checks on RF, power, and assembly issues before a second spin. Best, Hlib

User Avatar
Flag of UNITED KINGDOM

LoRa on an STM32WL at 915 MHz mostly comes down to a clean RF path: a tight matching network, solid ground reference and a proper antenna keepout on the 4-layer stack. I work in KiCad and have done low-power sub-GHz wireless nodes, battery-powered STM32 boards and a lot of industrial electronics. Some of that is in my portfolio. Timeline: schematic in 7 days, layout in 10 more, JLCPCB files and rationale document in 3 more. Two revision rounds are included. If the prototypes have design errors, I'll fix them and reissue the files at no charge, and help during bring-up.

User Avatar
Flag of PHILIPPINES

Hey , Good morning! I am an expert electronics engineer with skills including Manufacturing, Electronics, PCB Design and Layout, PCB Layout, LoRa, STM32, Product Design and Electrical Engineering. "LoRa" Please contact me to discuss more regarding this project. Appreciate your prompt response

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅