Fusion LTO Battery Cell Library
$30-250 USD
Posted 1 minute ago
•
Ends in 6 days
$30-250 USD
Paid on delivery
I need a complete Autodesk Fusion 360 library part for the Hakadi 2.4 V / 2500 mAh 23680 lithium-titanate battery cell referenced here: [login to view URL] Please base every critical dimension on the measurements shown on that product webpage; treat those as final even if they differ from drawings you may find elsewhere. The cell will mount to my PCB through through-hole pins or tabs, and the footprint only needs the two electrical holes—no extra mechanical holes or holder outlines. What I expect back is a single, ready-to-use library entry that contains: • A clear schematic symbol with correct pin numbering and names • A PCB footprint matching the two through-hole connections, aligned to the symbol’s pin order • A properly scaled 3-D model that snaps to the footprint origin in Fusion 360’s PCB workspace I’ll verify fit by dropping the part into an existing board and running a Fab DRC, so please keep pad spacing, hole sizes, and model origin precise. Provide the .lbr (or .fusionlibrary) file plus the native 3-D body if you build it separately. If you normally script footprints or use libraries like [login to view URL], that’s fine—as long as the final library imports directly into Fusion 360 Electronics without warnings.
Project ID: 40809222
About the project
9 proposals
Open for bidding
Remote project
Active 2 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
9 freelancers are bidding on average $161 USD for this job


Hello, Creating a Fusion 360 component that is both electrically correct and mechanically accurate requires PCB library expertise alongside 3D CAD precision, exactly the combination I use as an electronics and PCB design engineer with 10+ years of experience in hardware development, component libraries, PCB layout, and product design. I can produce the complete Hakadi LTO cell library entry with a clear two-pin schematic symbol, correctly numbered through-hole footprint, and a properly scaled 3D body aligned to the footprint origin for Fusion 360’s PCB workspace. My experience with schematic design, component and footprint libraries, 3D modeling, mechanical/electronic integration, and design for manufacturing directly supports your Fab DRC and board-fit requirements. I will base the critical geometry on the dimensions shown on the specified product page and provide the native library and separate 3D body where applicable. Choose me to create a clean, import-ready Fusion 360 library part suitable for immediate PCB placement and verification. Thanks!


For a two-hole cell part, the details that usually cause DRC trouble are pad pitch, drill size and where the 3D model origin sits. I'll take the dimensions from the Hakadi page, build the symbol, footprint and body in Fusion 360 with pin order matched, and test the import for warnings. You'll get the library file plus the native 3D body in two days. Some of my PCB boards are in my portfolio. Will the cell have pins or solder tabs?


Hi there, I can build a complete Autodesk Fusion 360 Electronics library entry for the Hakadi 2.4 V / 2500 mAh 23680 lithium-titanate cell, using the exact critical dimensions from the referenced product page. With 12+ years of experience in mechanical/CAD modeling and electronics library creation, I’ll deliver: a clear schematic symbol with correct pin numbering/names, a PCB footprint containing only the two through-hole electrical pads (no extra mechanical holes), and a properly scaled 3D body that snaps to the footprint origin inside Fusion 360’s PCB workspace. I’ll keep pad spacing, hole sizes, and origin alignment precise for Fab DRC verification, and ensure the library imports cleanly into Fusion 360 Electronics without warnings. You’ll receive the .lbr/.fusionlibrary plus the native 3D body as needed. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.


I can build this library part. From the product page the cell is 23 × 68 mm (23680 format), so I'll model a 23 mm diameter cylinder, 68 mm body length, Z+ up, origin at the footprint centre. Footprint: two through-hole pads only — no mechanical holes — with hole size and pad spacing sized for your chosen tabs/pins (I'll confirm your tab dimensions before finalising). Symbol: two pins, + (pin 1) and - (pin 2), with pin 1 aligned to the positive pad in the footprint. The 3D body will be a properly scaled STEP cylinder inserted into the package and origin-matched to the footprint exactly. Delivered as .lbr plus the native STEP body. Can you confirm the exact tab or pin dimensions you'll solder, since the hole spacing and drill size depend on that?


Hi Mate , Good morning! I am skilled electronics engineer with skills including Electronics, Autodesk Fusion 360, 3D Modelling, CAD / SolidWorks, CAD/CAM, PCB Layout, 3D CAD and Product Design. Please send a message to discuss more regarding this project. Thanks and Regards


Hi, I am a professional Electronics CAD Designer with 15+ years of experience in PCB component libraries, schematic symbols, footprint design, and 3D modeling using Autodesk Fusion 360. I understand you need a complete Fusion 360 Electronics library for the Hakadi 2.4V 2500mAh 23680 LTO battery, using the manufacturer's specified dimensions. I will create a correctly numbered schematic symbol, a two-hole through-hole PCB footprint, and an accurately scaled 3D model aligned with the footprint origin. Deliverables include an import-ready .lbr or .fusionlibrary file and native 3D CAD model, with pad mapping and DRC compatibility checked. Estimated turnaround: 2–3 business days. Please share your preferred pin or tab configuration and mounting details. Best regards, Jordan
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗