3D-printable CAD model of WHOOP 5.0 sensor body (WS50) – accurate strap hinge required

$10-30 USD

Posted 1 minute ago

•

Ends in 6 days

$10-30 USD

Paid on delivery

I need an accurate 3D model of the WHOOP 5.0 sensor body (model WS50), exactly as shown in the attached photo, at real size. The model WILL BE 3D PRINTED, so it must be designed for printing (see below). Overall size: 34.7 x 24 x 10.6 mm (L x W x H), published spec. I will confirm with calipers and send my measurements; use my measurements where they differ. MOST IMPORTANT – THE STRAP HINGE: The strap connection must be dimensionally accurate. That means the raised stepped block at the end where the strap clips in, the groove along the bottom edge, and the small hole at the other end. The printed part must click into the real WHOOP strap just like the original device. Tolerance on these features: ±0.1 mm. My caliper measurements: - Hinge block: width __ mm, height __ mm, depth __ mm, step height __ mm - Groove: width __ mm, depth __ mm, length __ mm - Hole: diameter __ mm, distance from end __ mm MUST BE 3D-PRINTABLE: - Printer: FDM, 0.4 mm nozzle, PLA+ / PETG - Clean, watertight (manifold) STL: no holes, no inverted or zero-thickness faces - Minimum wall thickness 1.2 mm; no feature thinner than 0.8 mm - Flat bottom face that sits on the print bed - Hinge designed to print with no supports or minimal supports; use chamfers instead of fillets on downward-facing edges where possible - Hinge clearance as an editable parameter (default 0.15 mm) so I can tune the fit after test prints - Tell me the best print orientation Other requirements: - Units in mm, 1:1 real scale - Match the outer shape: curved top, flat bottom, rounded edges and chamfers - Solid outer body only (no electronics or internal parts) - No text, logos or engraving needed Deliverables: - Parametric SolidWorks file (.SLDPRT) – required - STEP + STL files - A screenshot showing the key dimensions I will test-print the model. If it doesn't print cleanly or the hinge doesn't fit the strap, you fix it (2 revisions included). Budget: $5 fixed. Please only bid if you are OK with $5. No counter-offers

Project ID: 40808670

About the project

3 proposals

Open for bidding

Remote project

Active 9 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

3 freelancers are bidding on average $23 USD for this job

User Avatar
Flag of PAKISTAN

Hey there, I can help reverse-engineer the WHOOP 5.0 WS50 sensor body into a precise, parametric SolidWorks model at 1:1 scale, with particular attention to the stepped strap hinge, bottom groove, and retaining hole. I can make the hinge clearance editable and prepare the geometry for FDM printing. Could you please share the attached reference photo and your completed caliper measurements, especially the hinge dimensions and strap interface? So I can help deliver the editable SLDPRT, STEP, watertight STL, and a dimensioned screenshot, with two revisions for fit adjustments. I’m happy to work within your stated $5 fixed budget. One note: ±0.1 mm physical fit cannot be guaranteed by an uncalibrated FDM printer, so test-print feedback will be important. Thanks!

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅