Cellular IoT RF PCB Design

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

I need a complete RF-grade PCB layout for a wireless sensor / IoT application that will connect over cellular networks (4G, LTE-M or NB-IoT). The board has to integrate a proven modem footprint plus the supporting RF layout details that keep emissions and sensitivity within spec. Beyond the modem itself, the design must also accommodate: • a matched antenna connection and SIM/eSIM interface, • on-board GPS for location reporting, • headers or pads for sensor inputs while keeping the entire system optimised for low-power, battery-driven operation. Please take the project from schematic capture through to production-ready Gerbers, BOM and assembly drawings. I’ll review the stack-up, RF matching network, impedance calculations and any tuning notes, so include those in the hand-off package. Feel free to work in Altium, KiCad, Eagle or another professional tool—just confirm which one you’ll be using so I can open the files on my side. A brief explanation of the routing strategy around the RF front end and GPS section will help me verify that best-practice isolation and grounding are respected. If you have previously shipped cellular IoT boards with solid TRP/TSR results, let me see an example so we can move quickly to layout and design freeze.

Project ID: 40808127

About the project

14 proposals

Open for bidding

Remote project

Active 11 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

14 freelancers are bidding on average $471 USD for this job

User Avatar
Flag of PAKISTAN

Hi, I understand you need a complete cellular IoT PCB, starting with schematic capture and ending with production-ready Gerbers, BOM, and assembly drawings. I will build the modem, SIM/eSIM, GPS, antenna feed, sensor headers, and battery power sections with careful RF separation, grounding, controlled impedance, and a clear matching network. I will document the stack-up, impedance calculations, routing choices, and tuning notes so your review and design freeze are straightforward. My Electronics and Electrical Engineering approach will keep the PCB Layout practical for manufacturing and low-power operation, using a professional tool you can open and edit. Which cellular modem and GPS modules are selected, and do you already have their approved reference layouts, stack-up, and antenna requirements? Please share the modem and GPS part numbers, antenna plan, preferred PCB tool, and any existing schematic or reference design. Start a chat and let’s discuss the RF targets and move quickly toward layout.

User Avatar
Flag of INDIA

My PCB layout and electronics engineering skills align directly with your need for a production-ready cellular IoT board. I can develop the design from schematic capture through PCB layout and prepare the Gerbers, BOM, assembly drawings and technical documentation required for manufacturing. Your modem, antenna connection, SIM/eSIM interface, GPS section and sensor headers can be incorporated as part of a carefully organised electronics design, with attention to RF routing, grounding, power distribution and battery-oriented product design. I can also document the selected stack-up, impedance calculations, RF matching network and relevant tuning notes so the hand-off package is practical for review and production. Using professional PCB design practices, I will provide clear, accurate engineering files and documentation for your sensor application. My background in Electrical Engineering, Electronics, PCB Layout and Product Design makes me well suited to take this board from concept to fabrication-ready output. I would be glad to contribute to your design and help move it confidently toward design freeze.

User Avatar
Flag of UKRAINE

Hello, Over 15 years in electronic hardware and firmware engineering, I have designed complex PCB layouts and IoT solutions through the full product lifecycle, from concept to production. Your cellular sensor board needs disciplined RF layout, power-conscious design and production-ready documentation, and my experience across Altium Designer, KiCad and Eagle aligns directly with those requirements. My PCB layout and antenna-design skills support the modem, matched antenna connection, SIM/eSIM interface, GPS section and sensor headers while maintaining appropriate RF separation, grounding and impedance considerations. I can provide the editable design files together with Gerbers, BOM, assembly drawings, stack-up information, impedance calculations and RF tuning notes. My embedded background with ARM Cortex, STM32, AVR and ESP32, plus I2C, SPI and UART experience, also helps ensure the hardware interfaces are practical for low-power IoT operation. I am ready to apply my electrical engineering, electronics and PCB layout experience to create a professional cellular IoT design package that is clear, reviewable and ready for manufacturing. Choose me to move your board toward a reliable design freeze. Thanks!

User Avatar
Flag of UKRAINE

Hello, RF, high-speed, low-power and IoT PCB design are central to my electronics engineering work, making this cellular sensor board a strong match for my expertise. I can take the design from schematic capture through PCB layout, Gerbers, BOM and manufacturing documentation using Altium Designer, KiCad, Eagle or EasyEDA, with the source files provided in the tool you select. My experience includes RF and wireless communication design, low-power IoT boards, sensor integration, embedded systems and custom footprint creation. I can incorporate the cellular modem, matched antenna interface, SIM/eSIM connection, GPS section and sensor headers while addressing controlled-impedance routing, grounding, RF isolation, stack-up documentation and manufacturing readiness. My background with BLE, Wi-Fi, LoRa, Zigbee and other embedded wireless platforms also supports careful treatment of sensitive RF and digital sections. I will provide the production documentation needed for review, including impedance calculations, RF matching details, routing notes and assembly drawings. My PCB layout and electronics engineering skills make me ready to turn this into a reliable, manufacturable design. Thanks!

User Avatar
Flag of COLOMBIA

Over 8 years in RF engineering and electronics design gives me the right foundation for a cellular IoT board where RF integrity, power efficiency and production readiness must work together. I design PCB layouts for embedded and RF modules and can take your project from schematic capture through validated documentation and manufacturing outputs. My experience covers circuit design, PCB layout, embedded systems, RF modules, simulation, testing and system integration. I can address the modem footprint, antenna feed and matching network, SIM/eSIM interface, GPS section, sensor headers and battery-oriented power design while maintaining disciplined grounding and isolation around sensitive RF areas. The hand-off can include production Gerbers, BOM, assembly drawings, stack-up and impedance documentation, plus RF routing and tuning notes. I will use a professional PCB design tool and provide openable source files alongside the manufacturing package. My background in troubleshooting, validation and compliance-focused hardware development helps me deliver a robust, reviewable design rather than only a routed board. I would be glad to apply that experience to your cellular IoT design and take it through design freeze.

User Avatar
Flag of UNITED STATES

Hello, My electrical engineering background makes me well suited to produce accurate, coordinated technical design documentation for your cellular IoT PCB project. I can support the schematic-to-documentation workflow and ensure the board package is organized clearly for review and manufacturing. Your requirements involve careful integration of the cellular modem, antenna connection, SIM/eSIM interface, GPS, sensor headers, and battery-conscious electrical design. My broader engineering experience includes multidisciplinary coordination, detailed plan production, technical review, and quality-focused documentation, skills directly relevant to preparing a complete handoff package with schematics, BOM, Gerbers, assembly drawings, stack-up information, and design notes. I can work within the professional PCB design environment selected for your project and communicate the RF front-end and GPS layout decisions clearly in the final documentation. I would be glad to apply my electrical engineering expertise to deliver a precise, production-focused design package. Thanks!

User Avatar
Flag of UNITED STATES

Hello, My Electrical Engineering skill is relevant to your cellular IoT PCB requirements, including RF layout, modem integration, antenna connections, GPS, SIM/eSIM interfaces and low-power sensor hardware. I can support the schematic and PCB design documentation through production files, including Gerbers, BOM, assembly drawings, stack-up information, impedance calculations and RF matching details. My broader engineering background includes 10+ years of professional experience producing accurate, detailed technical documentation and coordinated design packages for practical, buildable projects. For this project, I would provide clear documentation of the RF-front-end and GPS routing strategy, grounding and isolation considerations, and the supporting manufacturing package. I would be glad to apply my Electrical Engineering capability to your cellular IoT board and discuss the design further. Thanks!

User Avatar
Flag of UNITED STATES

Hi, Dear. I am a licensed electrical engineer experienced in technical CAD documentation for engineered projects. ✅ Electrical Engineering ✅ Detailed technical drawings I will provide organized design documentation for review and production. Send me message to discuss in detail. Thank you.

User Avatar
Flag of UNITED STATES

Hi there, I’m a RF PCB Design Engineer with 12+ years of experience taking cellular IoT hardware from schematic capture through production-ready outputs. For your LTE-M/NB-IoT wireless sensor board, I’ll create the complete RF-grade PCB layout with a proven cellular modem footprint, including the matched antenna interface, SIM/eSIM implementation, and GPS RF section. I’ll deliver a hand-off package containing stack-up recommendations, impedance and matching network calculations, routing strategy for RF front-end/GPS isolation and grounding, plus tuning notes, TRP/TSR oriented layout checks, and design-for-manufacture deliverables: Gerbers, BOM, and assembly drawings. I can work in Altium (file deliverables confirmed) and will ensure low-power, battery-driven considerations are reflected in component choices and layout practices. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅