Complete SolidWorks 3D Machine Design, Sheet-Metal DXFs & FEA Stress Simulation — Hydraulic Tracked Mini-Dumper (1000kg / 550kg High-Lift)

₹6000-10000 INR

Posted 1 minute ago

•

Ends in 6 days

₹6000-10000 INR

Paid on delivery

I am manufacturing an indigenous Hydraulic Tracked Mini-Dumper (Power Barrow) in India with a 1000 kg horizontal transport capacity and 550 kg high-tip scissor-lift capacity. All master dimensions, structural steel profiles (IS 2062), hydraulic cylinder bore/stroke specs, and preliminary 2D/3D reference scripts are ready. I need an experienced SolidWorks Mechanical Design Engineer (Sheet Metal, Weldments & Static FEA Simulation specialist) to build the complete, 100% manufacturable 3D SolidWorks Master Assembly (.SLDASM / .SLDPRT), animated kinematic motion mates, 1:1 .DXF CNC laser-cutting flat patterns, and a shop-floor 2D manufacturing drawing book. Machine Specifications & 5 Sub-Assemblies to Model: 1.SA-01 Base Chassis & Rubber Track Undercarriage (850 mm Overall Width): Ladder chassis (1150 × 850 mm) using ISMC 100×50 mm main channels and RHS 80×40×5 mm cross-members. Contoured 10 mm MS laser-cut track side frames (670 mm track gauge, 915 mm ground contact length) for 180 × 72 × 37 rubber tracks, Ø82.5 mm rear orbital motor pilot bores, 8 bottom track rollers, front spring tensioner, and 5 mm foldable rear operator foot pedal. 2.SA-02 High-Lift X-Scissor Mechanism (1500 mm Discharge Height): Angled X-scissor arms (950 mm pin-to-pin) using RHS 80×40×5 mm tubes, Ø35 mm EN8 center pivot shaft, and Ø25 mm EN8 end pins. Upper tipping cradle (1100 × 700 mm in RHS 80×40×5 mm) with 12 mm MS front 100° dump hinge lugs (Ø30.5 mm pin bore). Diagonal 63 mm Bore × 450 mm Stroke hydraulic lift cylinder. 3.SA-03 290L Sloped Dump Hopper (CNC Sheet Metal): 1220 × 800 × 600 mm sloped hopper body with a 35° front discharge lip, modeled in 4 mm IS 2062 sheet metal (4.0 mm inner bend radius, 0.42 K-factor) plus 50 mm Bore × 380 mm Stroke under-body tipping cylinder. 4.SA-04 Self-Loading Boomerang Shovel & Scoop Bucket: Curved L/Z boomerang loader arms (10 mm MS laser-cut plate) with 3 pivot pin bores (Ø30.5 mm base, Ø25.5 mm cylinder elbow, Ø25.5 mm bucket tip). 780 mm wide contoured front scoop bucket (5 mm sheet shell + 6 mm side cheeks + 10 mm EN8 beveled cutting edge) driven by 2x 50 mm Bore × 350 mm Stroke side cylinders. 5.SA-05 Rear Engine Tower, 12L Tank & 5-Spool Operator Console: Tapered sheet-metal operator hood (4 mm side panels + 6 mm top deck) with ventilated louver slots. Slotted 8 mm base plate for a 420cc (13.5 HP) engine, 12L hydraulic tank (320 × 280 × 260 mm), top-mounted 5-spool control valve bank, and tubular orange operator safety grab handle.

Project ID: 40807995

About the project

Open for bidding

Remote project

Active 57 yrs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅