Fix Leaking Water Heater Connection

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

My water heater itself is fine, but the pipe or fitting right above it has started to drip steadily. I need someone who can pinpoint the exact spot, replace or reseal the connection, and leave the area bone-dry when you’re done. Here’s what I expect: • Trace and confirm the leak at the pipe/connection above the heater • Repair or replace the faulty fitting using code-compliant parts • Turn the system back on and run it long enough to prove there’s no seepage The job is complete only when the joint stays dry under normal operating pressure for at least 30 minutes. Please tell me when you can come, what basic parts you usually carry for this kind of repair, and how long you’ll need once you’re on site.

Project ID: 40807753

About the project

9 proposals

Open for bidding

Remote project

Active 8 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

9 freelancers are bidding on average $434 USD for this job

User Avatar
Flag of NIGERIA

The steady drip at the pipe fitting above your water heater is a clear sign of a worn seal or joint that needs proper diagnosis before any fix. With a background in Engineering, I’ll trace the exact leak point, replace the fitting with code-compliant parts, and pressure-test the joint to confirm it stays bone-dry under normal operating conditions. I carry standard copper/PEX fittings, Teflon tape, and sealant for this type of repair. Could you confirm whether your plumbing above the heater is copper, PEX, or galvanized, so I bring the right fittings? Chukwudi

User Avatar
Flag of UNITED STATES

Hi, Dear. I am a licensed professional engineer with MEP and plumbing design experience. I can assess the leaking connection and provide a code-conscious repair recommendation. Send me a message to discuss details.

User Avatar
Flag of UNITED STATES

Hello, Pinpointing and correcting plumbing connection problems is directly supported by my Plumbing and Mechanical Engineering skills. I can inspect the pipe or fitting above your water heater, identify the precise source of the drip, and determine whether the connection needs resealing or replacement with an appropriate code-compliant part. My 10+ years of professional engineering experience across residential, commercial, and light industrial projects also means I approach repairs with attention to safe, practical, buildable solutions and proper system operation. I can verify the repaired joint under normal operating pressure and confirm it remains dry through the requested 30-minute test. I’m ready to provide a careful, professional repair focused on resolving the leak rather than masking it. Choose me to handle this water-heater connection issue with the plumbing and mechanical expertise it requires. Thanks!

User Avatar
Flag of UNITED STATES

Hi there, I’m a Plumbing Engineer with 12+ years of field experience fixing leaking water-heater connections. From your description, the heater itself is sound and the drip is at the pipe/fitting above it. I will pinpoint the exact leak location by tracing the connection and inspecting seals, threads, and adjacent components, then repair or replace the faulty fitting with code-compliant parts. After resealing/refixing, I’ll restore service and run the system long enough to verify the joint stays bone-dry under normal operating pressure. I treat your “30 minutes without seepage” completion requirement as the acceptance standard, ensuring the area is dry when I leave and the repair holds.

User Avatar
Flag of UNITED STATES

Hello, My 15+ years across plumbing, MEP systems, and construction make me well suited to diagnose and correct a leaking water-heater connection. I can trace the drip to the exact pipe or fitting, assess whether it needs resealing or replacement, and use appropriate plumbing parts with attention to applicable code requirements. My background as a licensed architect and structural engineer includes plumbing and piping layouts, mechanical systems, building-code reviews, and residential construction work. That combination helps me evaluate the connection safely rather than treating only the visible symptom. For this type of repair, I typically work with compatible couplings, adapters, connectors, thread sealant, and replacement gaskets as needed; the exact part depends on the existing pipe and fitting. I can arrange an on-site visit and expect the repair itself to require approximately 1-2 hours once access is available, including restoring operation and monitoring the joint under normal pressure for at least 30 minutes. Choose me for a careful, code-conscious repair that leaves the connection dry and verified. Thanks!

User Avatar
Flag of UNITED STATES

Hello, My engineering background in construction and mechanical systems is well suited to diagnosing a leaking water-heater connection and identifying whether the issue is the pipe, fitting, or seal rather than the heater itself. I focus on practical, code-compliant solutions and understand the importance of leaving a repair safe, sound, and fully verified. I can trace the source, repair or replace the faulty connection with appropriate parts, restore normal operation, and verify that the joint remains dry under operating pressure. My experience in engineering design and construction supports careful attention to fit, alignment, and real-world installation conditions. I am ready to handle this repair professionally and confirm the connection stays dry through the required testing period. Choose me for a precise, dependable assessment and repair. Thanks!

User Avatar
Flag of UNITED STATES

Hello, no problem. I can help assess the leak at the pipe or fitting above your water heater, identify the exact source, and determine whether the connection needs resealing or replacement. The repair should use appropriate code-compliant fittings and materials, followed by restoring the system to normal operating pressure and monitoring the joint for at least 30 minutes to confirm it remains completely dry. Typical parts may include replacement nipples, threaded adapters, unions, shutoff valves, dielectric fittings, approved thread sealant, and compatible pipe sections, depending on the pipe material and connection type. Please share your location, a few photos of the leaking connection, and the water heater type so I can assess the likely repair, confirm availability, and estimate the time needed on site. Sincerely, John

User Avatar
Flag of UNITED STATES

Hi, I am an experienced plumbing professional with 15+ years of experience in residential plumbing repairs, water heater connections, leak detection, and pipe fitting replacements. I understand your water heater is functioning properly, but a leaking pipe or fitting above it needs to be identified and repaired. I will inspect the connections, locate the exact source of the leak, and repair or replace the faulty fitting using code-compliant materials. After restoring water pressure, I will test the repaired connection for at least 30 minutes to confirm it remains leak-free. I typically work with copper, PEX, and threaded fittings, including couplings, adapters, valves, and sealing materials. Estimated repair time: 1–2 hours after inspection. Please share your location and photos of the leaking connection so I can confirm the required parts and availability. Best regards, Jordan

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅