Shed Foundation Drawing Plans

$30-250 USD

$30-250 USD

Paid on delivery

I am trying to buy a metal building an i need help with concrete the metal building will be 30x40x14 or 30x50x14 i need drawings for permit on the concrete pad. I am not sure if i need to pour a monolic pad or a step wall my issue is my driveway is on opposite side of yard in a low area i have bought clay to make my pad the same as my driveway it puts me 14inchs low on one end an about 6 inchs on other end and i think code in my area says my footing needs to be 12inch below undisturbed soil for frost line. Building requires 12x12 footing with 2 pieces of rebar running the whole way

Project ID: 40807637

About the project

45 proposals

Remote project

Active 1 min ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

User Avatar
Flag of UNITED STATES

Hi! I can help prepare the foundation drawings for your proposed 30×40 or 30×50 metal building. The main challenge is accommodating the uneven site elevations and imported clay fill while ensuring the footings reach suitable bearing soil and meet local frost-depth requirements. I'd first review the site elevations, building specifications and footing requirements, then develop the appropriate foundation layout, sections, reinforcement details and concrete drawings. I'd also compare the monolithic slab and stepped stem-wall approaches so the most practical solution can be evaluated before construction. For structural calculations and permit approval, I'd coordinate with a qualified local engineer. Could you share your project location, site measurements and metal building manufacturer's foundation specifications? Best regards

45 freelancers are bidding on average $99 USD for this job

User Avatar
Flag of INDIA

Your shed foundation permit drawings require both accurate drafting and sound civil/architectural understanding, which aligns directly with my experience in architectural engineering, civil engineering, and construction drawings. I can prepare clear AutoCAD plans for the 30×40 or 30×50 metal building, including the concrete pad, footing layout, dimensions, elevations, rebar notes, and the changing site grade you described. My background in 2D drafting, 3D modelling, building architecture, and architectural design enables me to represent the 14-inch-to-6-inch grade difference clearly and develop drawings that communicate the proposed pad and footing arrangement effectively. I can also document the relevant foundation concept—such as a monolithic slab or stepped foundation—based on the site conditions and the building requirements you provided, including the 12×12 footing and continuous rebar detail. I am ready to produce professional, permit-oriented foundation drawings in AutoCAD and support the project with precise architectural and civil drafting. Choose me to turn your building and site information into clear, usable plans.

User Avatar
Flag of INDIA

Your metal building permit package needs clear, accurate 2D drafting that reflects the changing site elevation, footing depth, and concrete requirements. My 6+ years of design experience, combined with skills in 2D Drafting and CAD/CAM, enable me to prepare professional foundation drawing plans for your 30×40 or 30×50 metal building. I can develop a clear plan showing the concrete pad, 12×12 footing, continuous reinforcement, stepped conditions where the grade changes, and the relationship between the proposed pad and surrounding elevations. My architectural and drafting background allows me to present the information in a clean, permit-oriented format while accounting for the 14-inch-to-6-inch grade difference described. I would be glad to prepare a precise foundation drawing package that clearly communicates the proposed construction. Choose me for organized, professional CAD drafting tailored to your building project.

User Avatar
Flag of INDIA

My architectural working-drawing and AutoCAD experience directly matches your need for permit-ready concrete foundation plans for a 30×40 or 30×50 metal building. I can prepare clear 2D drafting that reflects the different site elevations, including the approximately 14-inch and 6-inch grade differences you described. My background in architectural design, 3D modeling, SketchUp, Revit, Tekla and AutoCAD allows me to translate the building and site conditions into accurate, easy-to-review drawings. I can detail the proposed pad and footing arrangement, show stepped or monolithic options where appropriate, and document the 12×12 footing and continuous two-rebar requirement based on the information provided. Since local frost-depth and permit requirements can vary, the drawings can be clearly presented for review by the relevant local authority or engineer. I am ready to produce professional foundation drawing plans that make the elevation and concrete requirements easy to understand. Choose me to turn your metal-building foundation concept into precise CAD documentation.

User Avatar
Flag of VIETNAM

How are you? Your project matches well with my skills. Please check my profile. https://www.freelancer.com/u/lamvanduong I'll provide all drawing sets and wonderful result such as PDF, DWG(2D drawings), rendering images and BIM(3D model). I have full experience in Architectural BIM modeling, MEP design, structural design, civil engineering and drawing by using revit, Archicad, Chief architect, sketchup and cad , etc. I'll use your country building code to permit. Let's discuss more about project and start together. Best regards

User Avatar
Flag of BANGLADESH

hi there, i am an architect and shed building drawing expert, i have 15 years of experience on shed house footing plan, foundation plan, column, beam, and steel structural design with necessary measurement and scale in autoCAD. i am able to do your shed house foundation plan, floor plan, elevation design with necessary measurement and scale very expertly

User Avatar
Flag of PAKISTAN

Hi, I’d be happy to help prepare the concrete foundation and permit drawings for your 30×40 or 30×50 metal building. I have experience in architectural drafting and permit drawing preparation, including foundation plans, dimensions, sections, and construction details using AutoCAD. I can review your site conditions, elevation differences, and building requirements to develop a clear drawing package for permit submission. I would also coordinate the footing details with your local code requirements and any required engineering specifications. I’m available to get started once you share the building specifications and any local permit requirements.

User Avatar
Flag of COLOMBIA

Hello, I have experience preparing concrete foundation plans, slab details, and structural drawings for residential and metal buildings. Your site elevation differences and imported clay fill need careful consideration to determine whether a monolithic slab, stepped footing, or another foundation design will provide adequate support and meet local code requirements. I'll review your site elevations, soil conditions, and metal building specifications to develop a practical foundation solution for either the 30×40×14 or 30×50×14 building. I'll prepare dimensioned foundation plans, footing sections, reinforcement details, anchor bolt layouts, and construction notes while verifying frost-depth and bearing requirements. I'll deliver permit-ready DWG/PDF drawings for review by a locally licensed structural engineer, who can provide the required seal if applicable. Thanks for reading my proposal. Edwin

User Avatar
Flag of INDONESIA

Hi, there I’m pleased to submit my proposal for your architectural project. As an experienced architect, I provide clear, well-considered design solutions supported by accurate drawings and strong attention to detail. I’ve worked on a wide range of architectural projects and enjoy collaborating closely with clients to ensure the final outcome aligns with both functional needs and design goals. I’d be happy to contribute my experience to your project. Please feel free to review my portfolio for examples of previous work, and I look forward to discussing your requirements in more detail. Thank you for your consideration. Best regards.

User Avatar
Flag of PAKISTAN

Hello, Permit-ready concrete foundation drawings for a 30×40 or 30×50 metal building are a strong match for my architectural drafting and civil engineering background. I produce accurate 2D drafting and AutoCAD documentation for construction and permit use, with experience delivering approval and construction drawing sets to US, UK, Australian and Middle East standards. Your changing site elevation, clay fill, frost-depth requirement and choice between a monolithic pad and stepped foundation need to be clearly represented in the drawings. I can document the proposed slab, footing layout, elevations, sections, grade transitions, reinforcement notes and the required 12×12 footing with continuous rebar, while keeping the set clear for permit review and contractor pricing. I will prepare a professional, revision-tracked drawing package in AutoCAD and PDF, with native files included. Choose me for accurate foundation documentation that communicates the site conditions and proposed concrete design clearly. Thanks!

User Avatar
Flag of PAKISTAN

Hi, I’m a Mechanical Engineer with experience in AutoCAD, technical drafting, and engineering design documentation. I can help prepare clear, dimensioned foundation and concrete-pad drawings for your proposed 30×40 or 30×50 metal building, including footing layouts, elevations, slab dimensions, and reinforcement details based on the applicable engineering specifications. I can also help compare the monolithic slab and stepped foundation layouts to accommodate the 6–14 inch site elevation difference. Since frost depth, soil conditions, and local building codes determine the final foundation design, I would coordinate the drawings with your local building requirements and an appropriately licensed structural/civil engineer for approval and permitting. Thanks.

User Avatar
Flag of VIETNAM

Hi there ? I have extensive experience using Revit, Chief architect, Autocad and archicad for architectural and MEP modeling, including creating detailed BIM models, floor plans, and construction documentation. I can ensure your project is accurately modeled with full parametric functionality for easy updates. I can start with an initial model draft for your review. Looking forward to collaborating! thank you

User Avatar
Flag of UZBEKISTAN

Hi, I would be glad to assist with the foundation design and permit drawings for your 30x40 or 30x50 metal building. The difference in grade across the proposed pad, along with the requirement to extend footings below the local frost depth and the specified 12x12 footing with continuous rebar, needs to be addressed carefully. I can evaluate the elevation differences and proposed fill, then develop a suitable foundation detail—whether that involves a monolithic slab, stepped footings, or a retaining/step wall configuration. The final drawing package can show the concrete layout, footing sections, reinforcement, and relevant construction details. I'd first like to review your location, site elevations, and building supplier's foundation requirements so the design can be coordinated with local code and permit expectations.

User Avatar
Flag of PAKISTAN

Hi, I’ve read your requirements and can handle this project with accuracy and care. I can create clear permit-ready foundation drawings for your metal building, considering the pad dimensions, slope conditions, frost-line depth, and the 12x12 footing with continuous rebar. My approach is to review the site conditions, evaluate whether a monolithic slab or step wall foundation is the better fit, and develop drawings that clearly show the concrete pad layout, footing details, and structural notes needed for submission. The final deliverable will meet your expectations and support a smoother permit process. I have 3+ years of experience in 3D Modelling, 2D Drafting, and AutoCAD. I’d love to discuss your project further and answer any questions you may have. Feel free to reach out so we can refine the details together.

User Avatar
Flag of PAKISTAN

With more than 6 years as an AutoCAD expert, draftsman, and civil engineer, I create the detailed 2D construction drawings needed to support shed and garage permit applications. Your 30×40 or 30×50 metal building requires a clear concrete foundation plan that addresses the changing pad elevations, footing depth, frost-line requirements, and the specified 12×12 footing with continuous rebar.

User Avatar
Flag of BANGLADESH

I have experience preparing permit-ready concrete foundation and slab drawings for metal buildings, including footing details, rebar layouts, slab dimensions, elevations, and construction details. I understand the issue with your 30x40x14 or 30x50x14 building and the difference in site elevations. The 14-inch to 6-inch grade variation, added clay fill, and the requirement to reach undisturbed soil below the local frost depth need to be addressed properly in the foundation design. I can develop the drawings around the required 12x12 footing with continuous reinforcement and show the appropriate slab, footing, grade transitions, and elevation details. I can also prepare the drawings in a clear format suitable for permit submission and coordinate the design with the metal building dimensions and manufacturer requirements. If a monolithic slab is not appropriate because of the grade difference, the drawings can clearly detail the required stepped foundation/wall arrangement. I have handled similar concrete and structural drafting work before and can work from your building plans, site dimensions, and local requirements. I can start immediately and provide a fast turnaround. Pricing is flexible depending on the final scope and required permit set.

User Avatar
Flag of PAKISTAN

Hello, I can professionally prepare detailed concrete foundation and slab drawings for your 30×40 or 30×50 metal building, including footing details, slab layout, reinforcement, dimensions, and sections. I have expertise in AutoCAD, Revit, and architectural drafting, and can quickly deliver clear, accurate permit-ready drawings while coordinating with your local building code requirements. Regards, Muhammad Nouman Malik

User Avatar
Flag of PAKISTAN

Thanks for posting the project With 8 years of relevant CAD drafting and structural design coordination experience I can help prepare clear concrete foundation and permit drawing documentation for your proposed 30x40x14 or 30x50x14 metal building I understand your concern regarding the sloped yard the clay fill and the difference in elevation of approximately 14 inches on one end and 6 inches on the other The key consideration is determining whether a monolithic slab or stepped foundation wall is appropriate while accounting for the local frost depth and the required 12x12 footing with two continuous rebars I can help with Concrete pad and foundation layout drawings Dimensioned footing and slab details Elevation and step details based on site levels Rebar layout and section details based on approved engineering requirements Clear PDF and editable CAD drawings for permit submission Before finalizing the design the local frost depth soil conditions building requirements and whether the clay fill is properly compacted must be verified A licensed local structural engineer should review and approve the foundation design Please share your city and state the metal building specifications and any site elevation information so I can assess the drawing requirements Best Regards Sidra https://www.freelancer.pk/u/sidratulm20

User Avatar
Flag of UNITED STATES

Hello, Foundation and concrete permit drawings for metal buildings align directly with my structural, civil, and architectural engineering experience. I design and analyze concrete, steel, wood, and masonry systems, while preparing detailed structural and permit-ready plans in AutoCAD and Revit. Your uneven site elevation and clay fill make the foundation approach especially important. My civil engineering background covers grading, drainage, site development, and coordination with geotechnical recommendations, while my structural experience supports detailing items such as continuous footings, reinforcement, slab design, and the transition between a monolithic slab and stepped foundation walls. I can produce clear 2D drawings that address the proposed 30x40 or 30x50 building, elevation changes, footing depth, and required rebar layout for permit review. I bring the multidisciplinary experience needed to coordinate the concrete pad with the building and site conditions. Choose me for accurate, practical, code-conscious foundation drawings prepared for your permit submission. Thanks!

User Avatar
Flag of UNITED STATES

Hello, With 10+ years of structural and civil engineering experience, I can develop permit-ready foundation drawings for your proposed 30×40 or 30×50 metal building, including the concrete pad, footing layout, reinforcement, and site elevation conditions. My background includes foundation and footing design, reinforced concrete, grading, drainage, retaining walls, and permit engineering for residential, commercial, and light-industrial projects. I can evaluate the 6-14 inch grade difference created by the imported clay and address whether a monolithic slab, stepped foundation, or another foundation arrangement is appropriate based on the site and applicable frost-depth requirements. The plans can also reflect the building’s required 12×12 footing and continuous two-bar rebar detail, coordinated into clear AutoCAD construction documents. I provide practical, buildable engineering documents that support permitting and construction. I would be glad to prepare the foundation plan for your metal building and help resolve the grade and footing concerns properly. Thanks!

User Avatar
Flag of UNITED STATES

✅ Hi, there! ✅ You need permit-ready concrete pad/footing drawing plans for a 30x40x14 or 30x50x14 metal building, with frost-depth and the low, driveway-opposite yard grade accounted for. I’ll handle this end-to-end and produce code-focused foundation drawings for your jurisdiction, using my engineering drafting experience to translate your site conditions and footing specs into clear permit documents. ✔ My deliverables for you will be: * Permit drawing set for concrete pad/footings (monolithic slab vs step-wall option) * Footing layout with specified 12x12 footings and continuous rebar details * Frost protection dimensioning to undisturbed soil depth and typical sections * Plan/Cross-section details showing the 6-14 inch grade transition and subgrade prep assumptions Best regards, Mike

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅