Industrial IoT Machine Monitoring System
₹1500-12500 INR
Posted 1 minute ago
•
Ends in 6 days
₹1500-12500 INR
Paid on delivery
I need concise, reliable firmware written in Embedded C/C++ for an ESP32 that will act as the on-machine HMI. The board already has a TFT display, keypad, Wi-Fi, and the usual sensor inputs routed; your job is to make the screen come alive with live machine status, production counts, and current operating mode while allowing operators to interact through the keypad. Core tasks • Read the existing registers or sensor lines that provide running status and counts. • Drive the TFT over SPI to present that data in a clear, always-updating layout. • Implement keypad handling so operators can move through screens and trigger the basic control actions we define together (start/stop, reset, change a setting, etc.). • Maintain a solid, non-blocking architecture; FreeRTOS tasks, queues, or similar best practices expected. • Provide Wi-Fi + MQTT hooks in the code so data can later be published, even though the on-device interface is today’s priority. Deliverables 1. Well-documented source code and header files ready to build in PlatformIO or the ESP-IDF toolchain. 2. Pin map and build instructions that let my technician flash and validate the image. 3. A short test routine that shows the live status changing and keypad commands being acknowledged on the display. Please share at least one previous ESP32 project that involved a display, keypad, or industrial control so I can gauge fit. If anything above needs clarification, let me know and we’ll firm it up before you start.
Project ID: 40807159
About the project
Open for bidding
Remote project
Active 57 yrs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗