OrCAD PCB & Enclosure Revision for Power supply in aluminum enclosure
$750-1500 USD
Posted 1 minute ago
•
Ends in 6 days
$750-1500 USD
Paid on delivery
I already have a finished OrCAD schematic, routed layout, and a matching STEP model of the enclosure. What remains is a quick-turn refinement so the board slides into the metal housing without interference. Scope • Keep the existing board outline and mounting-hole pattern exactly as is. • All connectors and stay where they are; most parts only need tiny nudges—just a few mils—so we respect the fixed height limit imposed by the cover. • One wide component is critical and drives the rest of the design: it must clear the enclosure walls and nearby parts per the clearance value called out in the STEP. • No circuit changes are required; this is purely a mechanical/layout tidy-up. Files I will supply on day one • OrCAD .DSN / .BRD files (schematic + layout) • Current PCB and enclosure STEP models Deliverables (within 7 calendar days) • Updated OrCAD layout, fully DRC-clean • New 3D assembly STEP reflecting the moved parts • Separate “empty” enclosure STEP you can give straight to my customer • Fabrication drawings for the machined aluminium enclosure (PDF + native CAD) I expect someone experienced in OrCAD PCB Editor, mechanical clearance checks and STEP file exchange could wrap this up in two to three days; a full week is my hard deadline. If you routinely juggle ECAD–MCAD tweaks and can commit to prompt hand-off, I’d like to get started immediately.
Project ID: 40806661
About the project
13 proposals
Open for bidding
Remote project
Active 4 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
13 freelancers are bidding on average $963 USD for this job


Hello, My 10+ years in electronics and PCB design, combined with practical 3D CAD and CNC manufacturing experience, directly match this ECAD-MCAD refinement for your power supply enclosure. I understand how to preserve an existing board outline, mounting pattern, and connector positions while making precise component adjustments around metal walls, cover height, and critical clearances. My background covers PCB layout, multilayer design, DFM, manufacturing documentation, mechanical/electronic product development, 3D modeling, CAM, and CNC manufacturing. This lets me work across the OrCAD layout and enclosure interface with production in mind, including DRC verification, updated 3D assembly data, an empty enclosure STEP, and fabrication documentation for the machined aluminium housing. I am ready to apply this combined electronics and mechanical engineering experience to your fixed-layout revision and provide a prompt, accurate hand-off within your deadline. Choose me to handle the PCB clearance and enclosure documentation as one integrated engineering task. Thanks!


My multidisciplinary mechanical and electrical engineering background is well suited to refining your power-supply PCB and aluminum enclosure as one integrated assembly. I work with SolidWorks and AutoCAD on complex assemblies, sheet-metal parts, fabrication drawings, CNC documentation, GD&T, BOMs, and STEP/IGES exchange—directly relevant to the enclosure clearance and manufacturing deliverables. I can support the mechanical side of the revision while applying my electronics and electrical engineering knowledge to preserve the existing board intent, connector locations, outline, and mounting pattern. My experience producing practical, manufacturable designs and clear documentation aligns with your need for an interference-free 3D assembly, an empty enclosure STEP, and native/PDF fabrication drawings. I am ready to contribute to this quick-turn ECAD–MCAD refinement and would be pleased to take responsibility for a precise, manufacturing-ready hand-off within your stated deadline.


Hello, Mechanical design, 3D CAD, and CAD/CAM are central to my engineering work, making this enclosure-clearance revision a strong match for my skills. I can work from your existing STEP models and preserve the established board outline, mounting-hole pattern, and connector locations while focusing on the required component clearances and height restrictions. My background spans mechanical and electrical engineering, structural coordination, 3D modelling, and detailed CAD documentation. That combination is valuable for an ECAD-MCAD refinement where the layout must remain electrically unchanged while the physical assembly, enclosure fit, and fabrication documentation stay consistent. I can support the updated assembly STEP, empty enclosure model, and native/PDF enclosure drawings alongside the revised design files. I am ready to apply my mechanical design and CAD expertise to this quick-turn revision and deliver a clean, coordinated result within your stated deadline. Thanks!


Hello, Mechanical enclosure design and fabrication-ready documentation are my core strengths, making this OrCAD layout refinement a strong match. I specialize in product and enclosure design, metal component development, 3D CAD assemblies, and precise design modifications where wall thickness, clearances, mounting interfaces, and assembly requirements matter. I can support the mechanical clearance work around your fixed PCB outline, mounting holes, connectors, height limit, and critical wide component, while producing the revised PCB/enclosure STEP assembly and the separate empty enclosure model. My experience with dimensioned manufacturing drawings, technical documentation, STEP files, and fabrication-ready CAD aligns directly with your requested PDF and native enclosure drawings. I am ready to apply the required ECAD-MCAD refinement carefully and deliver clean, organized engineering files within your one-week deadline. Choose me for accurate mechanical coordination and a prompt hand-off. Thanks!


Hello, My combination of PCB Layout, 3D CAD, mechanical design, and electrical engineering directly matches this ECAD-MCAD refinement. I can work from your existing OrCAD board and enclosure STEP models while preserving the board outline, mounting holes, connectors, and circuit design, focusing the revision on component clearances and the critical wide component. My experience in mechanical/product CAD and fabrication drawings supports the enclosure-side deliverables, including an updated 3D assembly, an empty customer-ready enclosure STEP, and PDF/native CAD drawings for machining. I also understand the importance of a clean, buildable handoff: the revised layout should be checked for mechanical interference and delivered DRC-clean rather than treated as a simple component move. I can take responsibility for this focused revision and provide the complete updated documentation within your stated seven-day window. Choose me for a practical, coordinated PCB and enclosure update with prompt hand-off. Thanks!


My 12+ years of engineering experience producing accurate, coordinated, construction-ready documentation makes me well suited to the mechanical coordination and enclosure revision required for your power supply assembly. My background spans structural, architectural, MEP, mechanical, and electrical engineering, with strong attention to dimensional coordination and design constraints. I can work from your existing OrCAD and STEP files to support the required board-to-enclosure fit, component clearance review, and updated technical documentation without altering the established outline, mounting pattern, or connector locations. My experience coordinating multidisciplinary drawings and construction details is directly relevant to preparing clear fabrication drawings for the machined aluminium enclosure, along with the revised assembly and empty enclosure STEP deliverables. I am ready to contribute a careful, detail-focused review and provide an organized hand-off within your stated schedule. Choose me to help complete this ECAD–MCAD refinement accurately and professionally.


I recently assisted a client with a similar OrCAD PCB refinement, ensuring their design fit perfectly within an enclosure. I can help you achieve a seamless integration for your power supply layout. Your project requires precise adjustments to maintain the existing board outline and connector placements while ensuring critical components clear the enclosure walls. I'll focus on the mechanical and layout tidy-up, delivering a DRC-clean layout and updated STEP models. With 6+ years in development, specifically in PCB design and mechanical clearance checks, I'm new to Freelancer, so my pricing is flexible while I build reviews. I can complete this within your 3-day window, ensuring a prompt hand-off. Let’s make sure everything fits like a glove. Will you provide any guidelines for part movement, or should I proceed with my best judgment? Regards, Joshua.


Hello, My 15+ years of professional CAD drafting and 3D modeling experience make me well suited to refine your aluminum enclosure and provide accurate mechanical deliverables. I work with AutoCAD and other professional CAD tools, and my skills include 3D CAD, 3D Modelling, and CAD/CAM, directly relevant to enclosure modeling, interference review, STEP exchange, and fabrication drawings. I can work from your existing OrCAD and STEP files while preserving the board outline, mounting-hole pattern, and connector locations. My background in detailed construction drawings and precise 3D models supports the required enclosure drawing package, updated assembly STEP, and customer-ready empty enclosure STEP. I understand this is a mechanical/layout adjustment rather than a circuit redesign, with clearance and height constraints requiring careful attention. I am ready to apply my CAD and 3D modeling expertise to this quick-turn refinement and deliver a clean, accurate set of final files within your stated schedule. Thanks!


Hi I hope you are well. I understand this is a mechanical-only OrCAD PCB refinement, preserving the board outline, mounting holes, connectors, and circuit while resolving enclosure interference. I can precisely nudge components by the required mils, prioritize the critical wide component’s STEP-defined clearance, and verify cover-height and wall clearances through ECAD-MCAD checks. My experience with OrCAD PCB Editor, DRC cleanup, 3D STEP assemblies, and machined aluminium enclosure documentation will ensure accurate, fabrication-ready results. I can deliver the updated DRC-clean layout, revised assembly STEP, empty enclosure STEP, and PDF/native fabrication drawings within your seven-day deadline. Thanks best regards. Rooz


Hi there, The existing OrCAD board must fit the aluminum enclosure without changing the fixed outline, mounting holes, connector locations, or circuit design, while the critical wide component and cover-height clearances are resolved. I have strong hands-on experience with Engineering, Electronics, and Electrical Engineering and have solved similar problems involving ECAD-MCAD coordination, PCB mechanical clearance, and STEP-based enclosure validation. My approach would be to: * Review the existing OrCAD .DSN/.BRD files, PCB and enclosure STEP models, and specified clearance constraints. * Identify the root cause of each interference and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using OrCAD PCB Editor with controlled component nudges that preserve the board outline, mounting pattern, and connector positions. * Test edge cases, reliability, performance, security, and integration behavior, including DRC, height limits, wall clearances, and 3D alignment. * Deploy or integrate the fix without disrupting the existing system by delivering the revised layout, assembly STEP, empty enclosure STEP, and fabrication drawings in PDF and native CAD formats. A reliable ECAD-MCAD result requires checking both nominal placement and the enclosure’s actual wall, cover, and machining clearances; DRC alone will not detect every mechanical conflict. I prefer fixing the actual root cause rather than applying temporary patches, and
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗