Nanotechnology to Program 3 commands on Screen for Wireless Control

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

I have a graphene-printed touch screen that must act on exactly three distinct commands and then wirelessly control a computer, phone, or other custom electronics. The hardware is already fabricated; what I need is the nanotech-level programming that lets my patented control software speak to the screen and, in turn, trigger the external device through Bluetooth or Wi-Fi. Here is the flow I’m aiming for: a user issues one of the three predefined gestures or touches, the screen’s embedded code recognises it immediately, and a secure wireless packet is sent to the paired device, which then carries out the linked action. All logic that interprets the gestures and handles the wireless handshake should reside on the screen’s own microcontroller so the external device remains lightweight. You will work directly with my proprietary API (documentation supplied after NDA) and deliver firmware that: • Maps the three commands to my exact protocol • Handles reliable Bluetooth/Wi-Fi pairing, reconnection, and low-power operation • Returns confirmation codes to my software so I can log each event For acceptance I’ll load your firmware onto a test screen, run each command, and verify that my desktop app receives the correct responses within the required latency. Please highlight any previous work on graphene or other printable electronics, and let me know which toolchains you prefer so we can align early.

Project ID: 40805332

About the project

9 proposals

Open for bidding

Remote project

Active 7 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

9 freelancers are bidding on average $428 USD for this job

User Avatar
Flag of PAKISTAN

Hi, I understand you need firmware for the graphene touch screen that recognises exactly three commands, sends secure Bluetooth or Wi-Fi packets, and returns confirmation codes through your proprietary API. I will first review the screen controller, touch data, wireless chip, protocol, and latency target. Then I will build the command mapping, pairing and reconnection flow, low-power handling, and event confirmations on the Microcontroller, followed by testing each command with your desktop software. My work with Electronics and API Integration will keep the external device simple while the screen handles the main logic. I can align the toolchain after reviewing the controller and NDA documentation. Which microcontroller and Bluetooth/Wi-Fi module are used on the screen, and what latency and packet-security requirements must the firmware meet? Please start the chat and lets discuss the hardware details, test process, and delivery steps.

User Avatar
Flag of UKRAINE

Hello, Over 15 years of electronic engineering experience in embedded systems and IoT makes me well suited to develop firmware for your graphene touch-screen controller. I work with ARM Cortex, STM32, AVR and ESP32 platforms using C/C++, with practical expertise in Bluetooth and the communication interfaces commonly used to connect embedded hardware and custom electronics. My background includes taking electronic projects from concept through production across consumer, medical, industrial, automotive and aerospace applications. I can implement the three-command mapping, on-device gesture interpretation, wireless pairing and reconnection logic, low-power behavior, and confirmation responses required by your proprietary API. My experience with I2C, SPI, UART, CAN, Ethernet, MQTT and IoT platforms also supports reliable integration with your surrounding system. I would be pleased to contribute firmware that fits your existing hardware and protocol. Choose me to apply my embedded and wireless-control experience to this specialized project. Thanks!

User Avatar
Flag of COLOMBIA

Your project aligns closely with my 8+ years in RF engineering, embedded systems, firmware development, and microcontroller-based electronics. I can develop firmware that interprets the three defined touch or gesture commands on the screen controller, maps them to your proprietary protocol, and communicates the resulting events wirelessly to the paired device. My experience includes RF modules, embedded controllers, circuit design, testing, validation, and system integration, supported by strong C/C++ embedded skills and Arduino experience. This is directly relevant to implementing reliable command recognition, Bluetooth or Wi-Fi communication, reconnection handling, low-power behavior, and confirmation codes for your desktop software. I can also work within your NDA-controlled API and focus on dependable firmware integration with the fabricated graphene-printed hardware. I would be pleased to contribute my embedded and RF expertise to this patented control system and deliver firmware ready for your acceptance testing.

User Avatar
Flag of SERBIA

Your project is a strong embedded-software fit: the hardware is already fabricated, while the remaining challenge is translating three touch or gesture states into dependable wireless actions. I can structure the firmware around a clear event pipeline: low-latency gesture recognition on the screen microcontroller, exact mapping to your proprietary protocol, secure Bluetooth/Wi-Fi session handling, reconnection and power-state management, and confirmation-code reporting for desktop-app logging. Keeping interpretation and handshake logic local will also preserve the lightweight behavior you want on the paired device. I would first review the controller architecture, touch-data interface, wireless chipset, latency target, and NDA-protected API. From there, I’d define a compact state machine and test each command across normal, repeated, interrupted, and reconnect scenarios before delivering flashable firmware and validation notes. I’m comfortable aligning the implementation with the existing embedded toolchain, such as vendor SDKs, C/C++, RTOS environments, or a bare-metal stack, so the firmware integrates cleanly with your patented control software.

User Avatar
Flag of INDIA

⚠️ If you're not happy, you don’t pay. ⚠️ Hi Client, thank you for checking my proposal and sharing the detailed project brief. I can develop your firmware using embedded C with a high-performance, low-latency design. I will deliver: • Precise mapping of the three commands to your proprietary protocol • Reliable Bluetooth/Wi-Fi pairing, including reconnection and low-power modes • Confirmation codes returned to your software for event logging • Comprehensive testing to ensure latency meets your requirements You will also receive documentation for the firmware and ongoing support during testing. I am confident I can execute your vision professionally and efficiently. Looking forward to discussing the timeline and next steps. Best regards, Chirag Pipal

User Avatar
Flag of PAKISTAN

Hello, Your project’s core requirement, connecting proprietary software with a custom interface through an API, is closely aligned with my API integration and full-stack development experience. I can work with your supplied documentation to connect the screen’s three defined commands to the exact protocol and ensure confirmation responses are available to your software for event logging. My technical background includes frontend/backend integration and custom interactive builds, which supports the software-facing side of this project: translating command events into structured wireless-control messages and handling communication with the paired device. I am also comfortable working on proprietary solutions under confidentiality and adapting the implementation to your existing architecture rather than forcing a generic template. I would be glad to contribute to this specialized control system and deliver an integration focused on accurate command mapping, dependable communication, and clear API responses. Choose me to bring the software connection for your three-command screen to life. Thanks!

User Avatar
Flag of JAPAN

Embedded firmware for a microcontroller-based wireless interface is closely aligned with my experience in Embedded C/C++, STM32, ESP32, RTOS development, device drivers, and real-time control systems. I can develop the screen-side logic to recognise the three defined touch commands, map them to your proprietary protocol, and return confirmation codes while keeping the external device lightweight. My background also includes RF and wireless systems using Bluetooth LE and Wi-Fi, communication protocols, hardware bring-up, sensor integration, and low-power optimisation. This supports the pairing, reconnection, reliable packet handling, and latency-sensitive behaviour required by your test acceptance criteria. I also work with SPI, I²C, UART, CAN and other embedded interfaces, enabling practical integration with the fabricated screen’s controller and electronics. I can work within your NDA-protected API and use an appropriate embedded toolchain for the target MCU, including STM32 or ESP32 environments where applicable. My focus is production-ready firmware, robust validation, and clear integration documentation. Choose me to turn the three screen commands into dependable wireless control.

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅