Design a 250 TPH Gold Wash Plant
$750-1500 USD
Posted 1 minute ago
•
Ends in 23 hours
$750-1500 USD
Paid on delivery
Mechanical / Mineral Processing Engineer Needed – Complete 250 TPH Gold Wash Plant Design PROJECT OVERVIEW We are seeking an experienced mechanical or mineral processing engineer to design a complete 250-ton-per-hour (TPH) placer gold wash plant utilizing a heavy-duty vibrating shaker deck. The plant will be fabricated from scratch in Ethiopia using locally available steel and manufacturing capabilities, with specialized mechanical components imported where necessary. We are looking for an engineer with proven experience designing vibrating screens, aggregate washing plants, mineral processing equipment, or complete gold wash plants. Our goal is to develop a reliable, efficient, modular wash plant optimized for continuous operation, ease of maintenance, and high gold recovery. The final design must be independently engineered and suitable for fabrication. PRELIMINARY PLANT SPECIFICATIONS Processing capacity: 250 metric tons per hour Maximum feed rock size: 400 mm (approximately 16 inches) Material: Alluvial gold-bearing gravel, sand, and rocks with minimal sticky clay Feeding method: Wheel-loader-fed hopper Screening system: Heavy-duty vibrating shaker deck with integrated spray bars Grizzly: Preferably no separate grizzly, subject to engineering evaluation Screen apertures: Approximately 10–15 mm, subject to optimization Water requirement: Approximately 3,000 GPM available, with final flow and pressure to be engineered Gold recovery: Multiple parallel sluice boxes, preliminarily six at approximately 1 m wide × 7 m long Power: Electric motors supplied by an industrial diesel generator Operating schedule: Approximately 16 hours per day Plant configuration: Modular design suitable for disassembly and relocation between mining sites All preliminary specifications are subject to engineering verification and optimization. SCOPE OF ENGINEERING WORK 1. COMPLETE PLANT DESIGN Overall plant configuration and process flow Loader-fed hopper and material distribution Vibrating shaker deck and screening system Spray bars and water distribution Sluice boxes and gold recovery system Oversize and tailings discharge Modular structural supports and assembly connections 2. MECHANICAL AND STRUCTURAL ENGINEERING Vibrating screen sizing and operating parameters Exciter, spring, bearing, and motor selection Dynamic load calculations and vibration isolation Structural analysis, including fatigue-critical components Steel frame and support design Wear-resistant components and replaceable liners Engineered lifting points and modular connections The design must account for frequent 400 mm rocks in the feed material. 3. HYDRAULIC AND RECOVERY SYSTEM Water flow and pressure calculations Spray-bar and nozzle configuration Pump and piping specifications Sluice sizing, slope, and flow distribution Fine gold recovery optimization Water collection and discharge arrangements 4. FABRICATION AND ASSEMBLY DOCUMENTATION We require a complete engineering package suitable for manufacturing by a third-party fabrication workshop. Deliverables must include: Complete 3D CAD assembly of the entire wash plant Detailed 2D fabrication drawings for every manufactured component Structural and mechanical engineering calculations Material specifications and steel thicknesses Welding and bolted-connection details Complete bill of materials (BOM) Specifications for purchased components Steel cutting and fabrication schedules Modular assembly and installation instructions Electrical and mechanical equipment specifications Editable CAD source files (SolidWorks, Inventor, or equivalent) PDF and DXF manufacturing drawings REQUIRED EXPERIENCE Applicants should have experience with at least one of the following: Heavy-duty industrial vibrating screens Mineral processing plant design Aggregate washing and screening equipment Placer gold wash plants Mining equipment manufacturing Structural and dynamic analysis of vibrating machinery Preference will be given to engineers who can demonstrate equipment they have personally designed that was successfully fabricated and operated. PROPOSAL REQUIREMENTS Please include the following information in your bid: 1. Examples of similar equipment or plants you have designed. 2. Your specific experience with vibrating screen engineering. 3. Whether you can provide complete fabrication-ready drawings and engineering calculations. 4. Your proposed project timeline. 5. Your estimated total project cost and recommended payment milestones. 6. The engineering and CAD software you use. 7. Whether you can provide technical support during fabrication and initial commissioning. PROJECT OBJECTIVE Our objective is to obtain a complete, independently engineered, manufacturing-ready design that can be fabricated in Ethiopia without purchasing a complete wash plant from an equipment manufacturer. We are seeking an experienced engineering professional or team capable of taking the project from initial concept through final fabrication documentation. This is not a CAD drafting or rendering-only project. Engineering calculations, mechanical design expertise, and practical manufacturing experience are essential. The client must receive editable source files and the necessary rights to fabricate, modify, repair, and reproduce the custom-designed equipment. Any pre-existing or third-party intellectual property must be disclosed.
Project ID: 40830627
About the project
Open for bidding
Remote project
Active 57 yrs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗