Water Pump Automation Design Sri Lanka

$30-250 USD

Posted 1 minute ago

•

Ends in 6 days

$30-250 USD

Paid on delivery

Automatic Water Pump & Tank Filling System (Sri Lanka) Location: Pannala/Kurunegala area, Sri Lanka Project Type: Fixed-price, Phase 1 – Technical Assessment & Solution Design Preferred Expertise: Electrical Engineering, Mechatronics, Industrial Automation or Pump Control Project Background We are looking for a practical, cost-conscious engineer to develop a reliable, low-cost solution for automating an existing water supply system. Currently, a single water well and pump supply a residential house and a small factory. Both have separate water storage tanks. Whenever the factory requires water, employees must coordinate with the house to manually switch on the pump and change the distribution valves. We want to eliminate this manual coordination while retaining the existing pump and infrastructure as much as possible. Existing System: Pump: Approximately 0.5 HP, single-phase, powered from the house. Well to house tank: Approximately 80 m. Well to factory tank: Approximately 30 m. Pipe diameter: Approximately ½ inch. Tank elevation: Approximately 5–10 m. Both water supply branches can operate simultaneously. Power and control cabling modifications are possible, but low-cost solutions are preferred. Phase 1 – Scope of Work The selected engineer will: Assess the existing plumbing, pump and electrical control arrangement. Evaluate practical automation options, including mechanical, relay-based or electronic solutions. Recommend a reliable, economical system with appropriate pump protection and manual override. Provide a basic design, component list (BOM), estimated implementation cost and installation requirements. Submit a separate quotation for Phase 2 implementation and commissioning. The solution should prioritise reliability, simplicity, locally available components and ease of maintenance. Phase 2 – Future Implementation The selected engineer should be capable of implementing and commissioning the recommended solution, with materials, local labour and installation support provided by the client. Phase 2 will be separately agreed and contracted following the successful completion and review of Phase 1. Application Requirements Please provide: A brief introduction and examples of relevant work, particularly pump control, tank automation or industrial electrical systems. Your preliminary technical approach to this problem. Your fixed-price quotation for Phase 1, including any required site visit or travel expenses. Your location, availability for site visits and ability to provide Phase 2 implementation support. We welcome individual engineers and small engineering teams. Practical experience, problem-solving ability and commitment to delivering a working solution are more important than formal qualifications alone. Successful collaboration may lead to additional engineering and industrial automation projects.

Project ID: 40828844

About the project

4 proposals

Open for bidding

Remote project

Active 10 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

4 freelancers are bidding on average $175 USD for this job

User Avatar
Flag of INDIA

This job needs a pump and controls engineer in Sri Lanka, and I am not that person. I build websites and web apps, mostly PHP, WordPress, Laravel and Shopify, so water pumps, relay panels and valve automation are outside my trade. Saying otherwise would waste your time and mine. I am replying only so you don't wait on an answer from me. A local electrician or automation engineer who can stand at the pump and test it will serve you far better than someone remote. Nothing here is a quote or an offer to take Phase 1. Best of luck with the project. I can start right away.

User Avatar
Flag of UNITED STATES

Hi there, The current pump operation depends on manual coordination between the house and factory, creating avoidable delays and risks when switching valves or running the shared pump. The Phase 1 challenge is to design a simple, reliable control system that serves both tanks, protects the existing single-phase pump, and preserves manual override. I have strong hands-on experience with Electrical Engineering and Automation and have solved similar problems involving pump control, tank-level sequencing, and practical industrial electrical systems. My approach would be to: * Review the existing plumbing, tank levels, pump arrangement, electrical controls, pipe routing, and current implementation. * Identify the root operational risks and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution design using suitable relay-based or electronic Automation components. * Test edge cases, reliability, performance, safety, and integration behavior, including simultaneous demand and dry-run/overflow protection. * Provide the BOM, installation requirements, estimated implementation cost, and a separate Phase 2 commissioning quotation without disrupting the existing system. A key design decision will be selecting a priority or parallel-demand control strategy that prevents conflicting valve states while retaining a clear manual bypass and pump protection. I prefer fixing the actual root cause rather than applying temporary patches, and

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab