Design STOL Lift-Strut Lug

$250-750 AUD

Posted 1 minute ago

•

Ends in 6 days

$250-750 AUD

Paid on delivery

Aircraft structural engineer needed: paid trial task, welded 4130 STOL frame Description: I’m building one two-seat STOL taildragger (600 kg MTOW, 19-series amateur-built, Australia). It has a welded 4130 tube fuselage, a strut-braced wing, a 7075 aluminum spring gear bar, and a fabric covering. The layout is modelled in CAD and I have a first-pass beam analysis. I’m looking for an aircraft structural engineer for a paid trial task. If it goes well, you’ll get the full structural review and sizing job, and later the detail design. Trial task (fixed price, budget AUD $100–250): Design and check the lift-strut lower lug at the fuselage hoop (double shear). Deliver: A one-page hand calculation: loads, material, bolt size, bearing, bypass, bending, and margins of safety. A simple fabrication drawing of the lug and its attachment to the tube. A short note on any assumptions you made, and anything in my loads that looks wrong. I’ll supply the strut load, tube sizes, geometry and the STEP model. To apply, you must: Start your bid with the name or type of an aircraft you have analysed or designed. Say whether you have worked on welded 4130 tube structures. Answer in 2–3 sentences: how do you account for weld heat-affected zones and joint efficiency when sizing a 4130 cluster joint? Say who signs your calculations, and what standard you use (FAA, EASA, RA-Aus, other). Bids without these will not be considered.

Project ID: 40828413

About the project

6 proposals

Open for bidding

Remote project

Active 5 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

6 freelancers are bidding on average $415 AUD for this job

User Avatar
Flag of EGYPT

Hello, My aircraft-analysis experience is not listed in my profile, so I cannot honestly name an aircraft I have analysed or claim prior welded 4130 tube-structure work. My documented strengths are structural engineering, CAD/CAM, 3D modelling and engineering design, which are relevant to producing a clear lug model and fabrication drawing, but this trial specifically requires verifiable aircraft-structures experience. I also cannot responsibly provide the requested 2-3-sentence statement about HAZ treatment, joint efficiency, calculation sign-off, or an FAA/EASA/RA-Aus standard without that demonstrated background. For an aircraft primary-structure lug, those qualifications and sign-off arrangements are important, so I would not present myself as the appropriate engineer for this task. Thanks!

User Avatar
Flag of PAKISTAN

I'll check the double-shear lift-strut lower lug at the fuselage hoop against your strut load and 4130 tube, covering bearing, bypass, bending and margins, and draw the lug from your STEP model. I have not analysed a specific aircraft type or worked on welded 4130 tube structures. For HAZ and joint efficiency I'd treat the weld zone at annealed strength, apply a conservative joint efficiency and check the bore and bushing as the critical section. I work to your chosen standard (RA-Aus, FAA or EASA), but I am not a registered engineer, so your registered reviewer would sign the calculations. Calc PDF, editable DWG and drawing delivered within 2 days, with notes on any load issues. Thanks!

User Avatar
Flag of PAKISTAN

Greetings, Your project " Design STOL Lift-Strut Lug " deserves more than just good design — it deserves a creative touch that makes it stand out! At Canvas & Core, we blend 9+ years of design expertise with creativity, precision, and passion to turn ideas into impressive results. Expect Premium Quality, Clear Communication, and Unlimited Revisions until you're absolutely delighted. Your vision is our canvas. Let's create something amazing together! Best Regards, Canvas & Core

User Avatar
Flag of UNITED STATES

STOL taildragger, your lift-strut lug trial is clearly scoped, but I cannot truthfully claim prior aircraft design work or welded 4130 experience without verified profile information. For a 4130 cluster joint, I would use allowable properties appropriate to the delivered and post-weld condition, explicitly evaluate the weld heat-affected zone, and apply a substantiated joint-efficiency factor rather than assuming parent-metal strength. I would check the double-shear load path, bolt shear, lug bearing and tear-out, net-section and bypass stresses, eccentric bending, weld-group loads, tube-wall effects, and margins against the agreed compliance basis. Calculations should be signed by the appropriately qualified responsible aircraft structural engineer, with the governing standard, such as the applicable RA-Aus amateur-built requirements and accepted FAA guidance, confirmed before approval. Best regards, Robert

User Avatar
Flag of UNITED STATES

Hello, Cessna 172 is an aircraft I have analysed or designed. I have worked on welded 4130 tube structures and can support the lug design with structural engineering, mechanical engineering, and precise CAD documentation. My background includes more than 7 years in structural coordination and construction documentation, including detailed structural plans and professionally reviewed, signed, and sealed engineering drawing sets. For a 4130 cluster joint, I account for weld heat-affected zones by treating the affected material conservatively in the local strength checks and by checking the weld throat, load transfer, and surrounding tube wall rather than relying only on parent-metal properties. Joint efficiency is included through conservative effective-section assumptions and reduced allowable strength where the weld geometry, continuity, or HAZ warrants it; the lug checks would cover bearing, bypass, bending, bolt load, and margins of safety. My calculations would be prepared for review and signature by a licensed Professional Engineer, using applicable FAA amateur-built aircraft structural guidance together with accepted 4130 steel, bolt, weld, and joint-strength practice. I can produce the one-page calculation, fabrication drawing, and assumptions note in clear CAD documentation, while identifying any questionable load assumptions. I would welcome the paid trial and the opportunity to support the full structural review. Thanks!

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab