STOL Aircraft Structural Design Package

$5000-10000 AUD

Posted 1 minute ago

•

Ends in 6 days

$5000-10000 AUD

Paid on delivery

Title: Aircraft structural engineer: welded 4130 STOL frame, full design package (paid trial first) Budget: AUD $4,000–10,000 total, paid by milestone Description: I’m building one two-seat STOL taildragger (600 kg MTOW, amateur-built, Australia, 19-series approval). It has a welded 4130 tube fuselage, a strut-braced wing, a 7075 aluminum spring gear bar and fabric covering. The layout is modelled in CAD and I have a first-pass beam analysis, a weights and CG ledger, a fittings schedule and a control system sheet. I need an experienced aircraft structural engineer to take it from layout to build-ready design. This is a staged job, paid per milestone. You can be paid for stage 1 and stop there, and so can I. Stages Paid trial (AUD $100–250, fixed): design and check the lift-strut lower lug at the fuselage hoop. Deliver a one-page hand calculation (double shear, bearing, bypass, bolt bending, lug tear-out, tube and weld check, margins of safety), a simple fabrication drawing, and a short note on any assumptions or load problems you find. Structural review and tube sizing: frame, wing, gear and tail. Fixed price quoted after stage 1. Fittings and control systems: wing root and strut fittings, gear saddle, engine mount, hinges, stick, pedals, cables, pushrods, pulleys, trim and flaps. Fixed price quoted after stage 2. Fabrication drawings and approval documents: weld jig drawings, parts and hardware list, and stress documentation for RA-Aus 19-series approval. Fixed price quoted after stage 3. The full job is intended for the stage 1 winner, subject to the quality of their work. I can end the contract after any stage. All drawings, calculations and source files are mine. You must include in your bid (bids without these will not be considered): The name or type of an aircraft you have analysed or designed. Whether you have worked on welded 4130 tube structures. 2–3 sentences: how do you account for weld heat-affected zones and joint efficiency when sizing a 4130 cluster joint? Who signs your calculations, with their qualification, and what standard you work to (FAA, EASA, RA-Aus, other). A redacted page from a stress report or a drawing from past aircraft work. I’ll supply: a one-page trial brief with loads and geometry. After the trial, the CAD/STEP model, the beam screening report and the design brief. Not wanted: generic bids, 3D modelling or rendering only, and anyone who can’t take responsibility for their structural calculations.

Project ID: 40828426

About the project

3 proposals

Open for bidding

Remote project

Active 10 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

3 freelancers are bidding on average $6,608 AUD for this job

User Avatar
Flag of EGYPT

Hello, My background is in architectural and product 3D visualization, with skills in AutoCAD and CAD/CAM, not aircraft structural engineering. I have not analysed or designed an aircraft, and my profile does not demonstrate experience with welded 4130 tube structures, aircraft fittings, stress calculations, or RA-Aus/FAA/EASA approval documentation. For that reason, I cannot truthfully provide an aircraft project name, a qualified engineer’s sign-off, a weld heat-affected-zone and joint-efficiency basis for a 4130 cluster, or a redacted aircraft stress report/drawing. Those are essential requirements for a safety-critical, build-ready structural package, and claiming them without evidence would be misleading. I can support aircraft-related CAD drafting or visualisation work in AutoCAD/CAD/CAM, but this structural engineering trial should be completed by an appropriately qualified aircraft engineer who can take responsibility for the calculations and sign them to the applicable standard. Thanks!

User Avatar
Flag of PAKISTAN

Hello, Gridline Digital Studio specialises in accurate, construction-ready CAD and documentation, with experience producing detailed drawing sets to Australian standards. That makes me well suited to the fabrication-drawing and approval-documentation aspects of your STOL project, including clear native AutoCAD deliverables and milestone-based coordination. However, my profile does not show aircraft structural engineering experience, welded 4130 tube analysis, aircraft types analysed or designed, qualified signatory responsibility, applicable FAA/EASA/RA-Aus stress standards, or a redacted aircraft stress report/drawing. I therefore cannot accurately claim the specific qualifications and calculations required for your paid trial, including weld heat-affected-zone, joint-efficiency and lug strength checks. I can support the CAD and fabrication-documentation side once the structural engineer’s approved calculations and design inputs are available, but I would not present myself as the responsible aircraft structural engineer for this brief. Thanks!

User Avatar
Flag of SOUTH AFRICA

Hi there, we might be new to the platform but I'd love to share some relevant examples. Your project on the STOL taildragger sounds right up our alley, and we would love to exceed your expectations. Understanding your need for a clean and integrated design process, we can ensure a robust and polished outcome for the welded 4130 tube fuselage. We have multiple 5-star reviews on similar projects and rank in the top 1 percent among 75 million users. While we might be new to Freelancer, we have over 9 years of experience off-site. I truly appreciate your time in reviewing our proposal and would love to discuss this project more. Kind regards, Trichelle

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab