Genesis 9 Embroidered Insignia Badges
$30-50 USD
Posted 1 minute ago
•
Ends in 6 days
$30-50 USD
Paid on delivery
Project Brief: 3D Embroidered Chest Insignia Badges (Daz Studio - Genesis 9) 1. Project Objective Create ultra-detailed 3D embroidered chest insignia patches (6 total variants) as conforming Daz Studio Wearable Presets for Genesis 9. The badges must match the metallic gold sheen and quality of the matching sleeve braids, feature ultra-fine embroidery threading with an ultra-thin profile, and conform cleanly to the dress across poses without clipping or floating. 2. Provided Reference and Source Files - Base Insignia Blender Files (.blend): Separate .blend files are provided for the first three variants as a starting point/reference for the outer silhouette and proportions. You are welcome to refine, retopologize, or build directly from these meshes. - Additional Emblem Reference Photos (No .blend Provided): Two additional center-emblem reference photos are included (a stylized curved branching symbol and a Pi symbol). Please build these two variants using the exact same base mesh, scale, thickness, and Genesis 9 rigging as the first three badges. - Style Mockup Image: Reference for the layered patch construction - dark merrowed/braided outer border, thin inner gold corded trim, woven metallic gold base field, and raised black embroidered center emblem outlined in gold. - Placement Reference Photo: Shows exact real-world scale, thin profile, collar clearance, and placement anchored across the left chest vertical princess seam. - Daz Character and Dress Reference (.obj): Exported from Daz Studio at standard 1:1 cm scale (use a 0.01 scale factor when importing into Blender) with the dress fitted to Genesis 9 so the badge curvature matches the chest contour. 3. Geometry, Scale, and Embroidery Detail Requirements - Ultra-Thin Profile and Scale: Keep the physical badge thickness very low-profile (1.0 mm or thinner, ideally 0.5 mm to 1.0 mm) with soft beveled/tucked edges so it reads as a thin, sewn-on cloth applique rather than a thick plastic or metal pin. Match the overall dimensions and chest placement shown in the placement reference photo. - Iteration Note on Size and Thickness: Please note that dialing in the exact visual scale and thinness against the fabric may take a few quick test iterations in Daz Studio before final sign-off. Please plan for minor size/thickness adjustments during review. - Ultra-Fine Threading: Follow the layered layout of the style mockup, but scale the stitch/thread texture much finer than the macro threads in the reference image so the gold weave, black border stitching, and center emblem threads look tight, delicate, and realistic even in close-up renders. - Clean Topology: Efficient, clean quad topology with enough density to bend smoothly across the chest curvature. Use baked 4K Normal/Bump/Displacement maps for the fine stitch relief rather than overly dense geometry. 4. Daz Studio Rigging, Collision, and Fitting Specs - Conforming Figure (Not a Static Prop): Rig the insignia to Genesis 9 (Fit To: Genesis 9) with clean weight mapping across the chest/pectoral/upper torso bones so it tracks torso bends, arm raises, and shoulder movement naturally. - Collision Setup: Include a Smoothing Modifier with Collision Item pre-configured to the dress so the patch sits flush on the fabric and avoids poke-through during poses and dForce drapes. - Adjustment Morphs: Include basic utility morph sliders under Parameters - Push Forward / Offset, Scale, and Contour / Chest Curve - to quickly dial out any minor clipping across different Genesis 9 body shapes or extreme poses. - Pose-Test Proof (Required Before Final Sign-Off): Before delivering the final .zip, please share quick viewport or Iray test screenshots showing the badge fitted to the dress on Genesis 9 in the following stress poses to verify zero clipping, floating, or severe stretching: * Torso Bend Forward (hunched/leaning forward 30 to 45 degrees) * Arms Crossed in Front of Chest (high pectoral compression) * Arms Raised Overhead (chest/shoulder stretch) * Torso Twist Left and Right (30 degrees) 5. Materials (4K PBR / Iray) - 4K PBR Texture Maps: Base Color, Metallic, Roughness, Normal, and Height/Bump maps for all 5 variants. - Look and Sheen: Match the rich metallic gold weave and specular response of the sleeve braids so the chest badge and cuff braids look like a matched set in Daz Iray. 6. Deliverables A single clean Daz Content .zip archive ready to drop into a Daz Library, containing: - data/ folder (.dsf geometry, Genesis 9 rigging, and adjustment morphs) - Runtime/Textures/ (4K PBR texture sets for all 5 variants) - Wearable(s) Presets (.duf) for all 5 insignia variants saved cleanly (without baked simulation data) so each badge loads and auto-fits to any selected Genesis 9 character in one click.
Project ID: 40828149
About the project
7 proposals
Open for bidding
Remote project
Active 7 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
7 freelancers are bidding on average $58 USD for this job


Genesis 9 insignia project calls for ultra-thin, highly-detailed embroidery patches that conform to a Genesis 9 chest. As a Full-Stack Digital Expert, I will leverage Animation, 3D Animation workflows to deliver a Daz Studio Wearable Preset that fits the rig and dress with zero clipping. Solution: - Ultrathin patches (1 mm max) with beveled edges and baked 4K maps for tight thread relief. - Clean topologies and accurate chest curvature via Blender-to-Daz integration and weight-mapped rigging on Genesis 9. - 4K PBR textures: Base Color, Metallic, Roughness, Normal, Height for all 5 variants. - Precise collision setup to prevent poke-through and a simple utility morph system for pose flexibility. Deliverables: a single .zip containing data/, Runtime/Textures/ with 5 wearables (.duf) and test renders. Budget + timeline: 180 USD, 4 days. Portfolio references: https://www.freelancer.com/u/zarminagull189, https://www.freelancer.com/u/zarminagull189/projects, https://www.freelancer.com/u/zarminagull189?tab=portfolio, https://www.freelancer.com/u/zarminagull189?tab=projects, https://www.freelancer.com/u/zarminagull189?tab=awarded How do you want the embroidery texture to behave under Daz Iray lighting across poses, and should we include micro-stitch depth maps to preserve readability at extreme chest curvature?


Hello, Legislatíva Lauko here, with 10+ years of experience in 3D Modelling, 3D Rendering, and character asset creation for Daz Studio. I work on precise, production-ready wearable assets with clean topology, PBR materials, and pose-friendly fitting. I’ve understood your requirement for ultra-thin Genesis 9 embroidered insignia badges. I can build the six variants from the provided meshes and references, match the gold sheen, create fine embroidered detail, and set up proper Genesis 9 rigging, smoothing, and utility morphs for clean conforming wearables. Start the chat, and we can go through the references and fitting details. Regards, Legislatíva Lauko


Hello, My 3D rendering skill can support the creation of detailed Genesis 9 insignia badges with a strong focus on accurate form, proportions, surface appearance, and presentation. I can work from the supplied Blender meshes, reference images, and dress model to develop the six variants with a thin, refined profile that matches the chest contour. I understand the importance of reproducing the layered embroidered appearance: metallic gold fields, dark braided borders, fine raised emblems, beveled edges, and realistic stitch relief. My engineering background also brings careful attention to scale, dimensional consistency, clean construction, and precise fitting against the provided garment reference. I can produce clear viewport or Iray test renders for reviewing the badge appearance across the requested Genesis 9 poses. I am ready to contribute detailed 3D work to this project and would be glad to create the insignia set to your visual and fitting standards. Thanks!


✅ Hi✅ , Good evening! I am skilled engineer with skills including 3D Animation, Blender, 3D Design, 3D Modelling and 3D Rendering. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗