Kazakhstan Heavy Truck CAN Data Capture

$1500-3000 USD

Posted 1 minute ago

•

Ends in 6 days

$1500-3000 USD

Paid on delivery

I’m running a test to boost fuel-use and driving efficiency on a couple of heavy-duty trucks in Kazakhstan. To do that I need reliable, high-resolution power-train data captured directly from each vehicle’s CAN bus (or equivalent diagnostic port when available) while the trucks are in everyday service. Your role is to source or specify the right interface hardware, install it, and log three core signals in real time: engine speed (RPM), engine torque, and fuel consumption. The data must be time-stamped so that later it can be married up with external analytics. Deliverables • A clean, well-structured CSV (or similar open format) containing at least one full work-shift of RPM, torque, and fuel-flow data per truck. • A concise installation note covering connector used (J1939, OBD-II, direct CAN breakout, etc.), sampling rate, and any filtering you applied. I’ll review the first dataset to confirm signal quality and sampling frequency before we scale up. If you’re based in Kazakhstan, comfortable around CAN analyzers, data loggers, I’d like to hear from you.

Project ID: 40827957

About the project

10 proposals

Open for bidding

Remote project

Active 11 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

10 freelancers are bidding on average $2,152 USD for this job

User Avatar
Flag of PAKISTAN

Hello, Reliable vehicle data capture depends on getting clean signals from the truck before any efficiency analysis begins. Live Experts LLC specialises in engineering and applied-AI systems built around real machines and data, with 423 completed projects, a 4.9/5 rating from 354 verified reviews, and a 99% completion rate since 2016. Our team’s LabVIEW and data-acquisition experience supports structured real-time logging, while our electronics, embedded systems, signal-processing and data-analysis capabilities are relevant to CAN-based measurement hardware and high-resolution time-stamped datasets. We can also provide the installation note documenting the connector, sampling rate and filtering, with the output supplied in a practical open format such as CSV. I would be pleased to apply our measurement and embedded engineering experience to the first truck dataset and provide a dependable foundation for your fuel-use and driving-efficiency analysis. Thanks!

User Avatar
Flag of UKRAINE

Hello, Reliable vehicle data capture depends on both the interface electronics and practical commissioning in a working machine environment, areas covered by my 10+ years in electronics engineering, embedded systems, industrial automation, sensors, and data acquisition. I can support the CAN/diagnostic interface selection, signal acquisition, real-time logging, and installation documentation for the trucks. My background includes microcontrollers such as STM32, ESP32, and Arduino/AVR, industrial control systems, sensor integration, UART/I2C communications, troubleshooting, testing, and commissioning. This combination is relevant to capturing and validating RPM, torque, and fuel-flow signals while preserving accurate timestamps and producing clean open-format data. I would be glad to apply my electronics and data-acquisition experience to the initial truck dataset and provide a concise record of the connector, sampling rate, filtering, and installation details. Thanks!

User Avatar
Flag of UKRAINE

Hello, My 15+ years as an Electronic Hardware and Firmware Engineer, including automotive and industrial automation work, directly match the need for dependable vehicle signal capture. I work with CAN communication, embedded systems, ARM Cortex, STM32, C/C++, and Python, an effective combination for interfacing with a heavy truck’s diagnostic network and producing usable, time-stamped data. My electronics and signal-processing background supports accurate acquisition of engine RPM, torque, and fuel-consumption signals, while my experience developing reliable embedded and IoT solutions is relevant to continuous logging during a full work shift. I can also document the selected connector or CAN interface, sampling rate, and filtering clearly alongside a structured CSV dataset. I am ready to apply this automotive CAN and embedded-systems expertise to your Kazakhstan truck test and deliver a clean first dataset suitable for quality review. Thanks!

User Avatar
Flag of SERBIA

I can help turn your trucks’ CAN data into a dependable, analysis-ready dataset. The work would cover selecting a suitable J1939/diagnostic interface, configuring or building the logging workflow, validating the available engine signals, and capturing at least one complete work shift per truck. I’ll focus on reliable timestamps and high-resolution recording of RPM, torque, and fuel consumption, while documenting the connector used, sampling frequency, signal mapping, and any filtering or scaling applied. The output will be a clean CSV or equivalent open format, accompanied by a concise installation note so the first dataset can be reviewed before expanding the test. Because heavy-truck implementations can vary, I’ll verify signal availability and quality on the specific vehicles rather than assuming every parameter is exposed identically. The result will be practical, traceable data suitable for joining with your external analytics.

User Avatar
Flag of COLOMBIA

My 8+ years as a senior electronics engineer designing and integrating embedded hardware make me well suited to capture reliable power-train data from heavy trucks. I work with embedded systems, firmware in C/C++, signal processing, circuit design, and robust hardware validation—skills directly relevant to interfacing with a vehicle CAN or diagnostic port and producing dependable real-time measurements. I can apply my electronics and signal-processing background to the required RPM, torque, and fuel-consumption signals, including timestamped logging, data integrity checks, and clear documentation of the connector, sampling rate, and filtering. My experience carrying hardware projects from design and testing through implementation and documentation also supports a clean, structured CSV suitable for later analysis. I would be pleased to support the initial truck dataset and help establish a reliable capture setup for your Kazakhstan efficiency testing.

User Avatar
Flag of VIETNAM

⭐⭐⭐⭐⭐ Hi there, Can you confirm you need one validated CAN data-logging setup per truck, starting with a single full-shift pilot? The key priority is reliably capturing timestamped RPM, torque, and fuel-flow data from each truck without disrupting normal operation. Correct signal identification, sampling frequency, and clean export will determine whether the dataset is useful for later efficiency analysis. I have worked on embedded data-acquisition and IoT projects involving microcontrollers, CAN-oriented hardware integration, structured logging, and sensor data preparation for analysis. ❓ Which truck makes, models, years, and engine systems are involved? ❓ Do you already have access to a CAN analyzer or preferred logger hardware? I’ll focus on safe vehicle interfacing, dependable real-time logging, signal filtering, and a clear CSV plus installation note. I’m ready to begin immediately after confirming the truck details. I hope to hear from you and discuss the pilot setup further. Best regards, Phuong Nam D

User Avatar
Flag of POLAND

✅ Hey Mate✅ , Good evening! I am professional engineer with skills including Data Analysis, Electronics, CAN Bus and Signal Processing. Recently, I've done similar project so I am very confident to start your project. I can review your project requirements, understand the technical challenges, and develop a practical and cost-effective solution that meets your specifications. I focus on accuracy, quality, clear communication, and delivering work within the agreed timeline. I would be happy to discuss your project in more detail, understand your expectations, and explain how I can contribute to its successful completion. Please message me here so we can discuss the details. Best regards,

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab