IPhone compatible phone Case CAD
$250-750 AUD
Posted 1 minute ago
•
Ends in 6 days
$250-750 AUD
Paid on delivery
I need a production-ready 3D model (STEP format) for a silicone phone case that fits the upcoming iPhone 17/18 Pro Max. The key feature is a small wired headset that lives in a rear compartment: two earbuds share a single inline microphone and plug straight into the handset through a fixed USB-C connector molded into the case. When not in use, the cable must retract smoothly and park flush so the phone still sits flat on a table. Scope • Model the full silicone shell, the retractable spool or track that stores roughly one metre of cable, the rear compartment door or slider, and any rigid inserts needed to anchor the USB-C plug. • Keep all parts tooling-ready for silicone over-molding plus the few hard-plastic components the mechanism will require. • Make sure cut-outs align with Apple button and camera layouts and allow MagSafe rings to be over-molded later. Deliverables 1. Clean, watertight STEP file of every part and the final assembly. 2. Exploded view or simple PDF drawing set that shows part names, basic dimensions, and suggested materials. 3. Short note on tolerances, draft angles, and cable path so a molder can quote without extra rework. Acceptance The model must open error-free in SolidWorks/Fusion 360, maintain ±0.2 mm accuracy on all external iPhone mating surfaces, and show a working retraction path that avoids sharp bends tighter than 6 mm. If you have experience with silicone injection tooling or similar retract mechanisms, let me know—those examples will help me gauge your approach.
Project ID: 40827495
About the project
20 proposals
Open for bidding
Remote project
Active 8 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
20 freelancers are bidding on average $367 AUD for this job


Hello, I am a design engineer, I am expert in 3D different products designs & Modeling so i can do the required design in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.


A production-ready phone case requires precise 3D CAD and product-design expertise, and my experience with SolidWorks, Fusion 360, 3D CAD, and manufacturing-ready product design directly matches this project. I can create the complete silicone shell, rear storage compartment, retractable cable mechanism, rigid USB-C anchoring components, and final assembly in clean STEP format. My background in CAD/CAM, 3D modeling, and product design supports the accuracy your iPhone mating surfaces and tooling requirements demand. I can also prepare an exploded view or PDF drawing set with part names, dimensions, materials, tolerances, draft considerations, and the cable-routing details needed for quoting. The design will account for camera and button cut-outs, MagSafe ring integration, flush cable parking, and the required bend-radius constraints. I am ready to apply my SolidWorks and Fusion 360 skills to develop this concept into a clear, manufacturing-oriented CAD package. Choose me to create a precise and well-structured model suitable for review and production planning.


Hi there, Hope you are doing well, I have read your job description and I understood that you are looking for 3D cad designer who can create We specialize in 2d drawing,,3d modeling, 3d visualization, mechanical designs, product designs, 3d print design, building designs, 3d graphics design, fashion designs, and high quality rendering. I have extensive experience in software like Sketchup, Cad/Cam, Solidworks, Revit, 3dsmax, Blender, Lumion, vray, Rhino, Maya, Zbrush, 3d modeling and photorealistic rendering. I always aim to produce high-quality outcomes that perfectly align with client expectations.I am sure that I can deliver this project on time within your budget. Please check my relevant work in my portfolio. Let's connect and discuss in brief. Thanks.


Hello, My 10+ years in electronics and product development, combined with practical 3D CAD, mechanical/electronic integration, CNC manufacturing, and rapid prototyping experience, make me well suited to develop this electromechanical phone-case concept. I understand that the design must balance a flexible silicone shell with rigid inserts, a USB-C connection, cable storage, and reliable everyday operation. My background includes complete product development from concept and component selection through CAD integration, prototyping, testing, troubleshooting, DFM, and manufacturing documentation. I can prepare clean STEP models for the shell, retractable spool or track, compartment door/slider, inserts, and final assembly, while paying close attention to the stated mating-surface accuracy, minimum cable bend radius, MagSafe integration, tooling considerations, draft, tolerances, and watertight geometry. I can also provide an exploded view or PDF drawing set with part names, dimensions, suggested materials, and notes that help a molder evaluate the design without unnecessary rework. I would be glad to apply my electronics and product-design experience to this specialized phone case and deliver a production-focused CAD package. Thanks!


The combination of SolidWorks, Fusion 360, 3D CAD, and 3D printing makes me well suited to develop your production-ready phone case assembly. I can model the silicone shell, rear cable compartment, rigid USB-C anchoring components, retractable storage mechanism, and complete assembly while keeping the design suitable for manufacturing. My CAD and 3D design experience supports accurate iPhone mating surfaces, camera and button cut-outs, MagSafe provisions, watertight STEP exports, and clear part separation for silicone over-molding and hard-plastic inserts. I can also prepare an exploded view or drawing set with part names, dimensions, materials, and notes covering draft, tolerances, and the cable path, including the required bend-radius consideration. I would be glad to create a clean, error-free SolidWorks/Fusion 360-compatible model and documentation for your molder to review. Choose me to turn this complex concept into a practical, well-structured CAD assembly.


Hello, My 15+ years in electronic engineering and consumer-electronics product development make me well suited to designing a phone case that must integrate both a retractable headset and a fixed USB-C connection. I understand how mechanical packaging must work alongside embedded hardware, connectors, cable routing, and production constraints rather than treating the enclosure as an isolated shape. My skills in 3D Design, Product Design, and Electronics support the complete assembly: the silicone shell, rigid inserts, connector anchoring, rear storage compartment, and cable path. I can develop clean STEP parts and assembly geometry while accounting for the stated mating accuracy, minimum 6 mm cable bend radius, flush parking, camera and button clearances, and future MagSafe over-molding. My experience taking electronic products from concept through production also helps ensure the design is practical for tooling and assembly. I would be glad to apply this product-development background to create a clear, production-oriented model and drawing package for your case. Choose me to turn this integrated phone-and-headset concept into a well-organized CAD design. Thanks!


Hello, Your phone case combines a mechanical cable-storage mechanism with a fixed USB-C connection, and my background in electronic product development can help ensure the enclosure supports the electrical hardware correctly. I specialize in embedded hardware, PCB design, component selection, custom footprints, and manufacturing documentation, with experience developing wearable and IoT products where compact packaging and reliable connections matter. My services also include mechanical CAD and 3D enclosure design, allowing me to contribute to the full product concept rather than treating the USB-C connector and headset as isolated parts. I can prepare manufacturing-oriented documentation and coordinate the hard-plastic inserts, connector anchoring, cable routing, and enclosure interfaces around the electronics. My electronics expertise is especially relevant to connector placement, signal integrity, and ensuring the fixed connection is practical for production. I would be glad to apply this combined hardware and enclosure experience to create a clean, production-focused case assembly and supporting documentation for your project. Thanks!


My 10+ years of experience in 3D modeling, product design, mechanical design, and industrial design align directly with your need for a production-ready phone case assembly. I can create the silicone shell, rear compartment, retractable cable-storage components, rigid USB-C support parts, and final assembly as clean 3D CAD models, with attention to accurate iPhone mating surfaces, camera and button cut-outs, and a flush rear profile. My background also includes 3D printing, product visualization, and technical PDF/document preparation, allowing me to provide the STEP parts and assembly together with an exploded view or clear drawing set showing part names, dimensions, materials, cable routing, tolerances, and draft-angle considerations. I will keep the design focused on manufacturability and ensure the cable path respects the specified minimum bend radius. Best Regards Pinky


Hello sir, Did go through your job description and glad to share that I have enormous experience in IPhone compatible phone Case CAD I'm a seasoned programmer and Engineer with quality experience in Flutter, React, Node.JS, SpringBoot, Frontend and Backend Development, Python, Matlab, R studio, C, C++, C#, OpenCV, OpenGL, Tesseract OCR, google vision, Statisticaal programming/R progamming data analysis Computing for Data Analysis Time Series & Econometric, Machine learning, AI, Deep learning, Maatlab and Mathematica, 3D modeling, CAD/CAM,AutoCAD, 2D, Architectural Engineering, SolidWorks, Unity 3D, AutoCAD, 2D drawing, 2D draftingPCB, Electronics, Arduino, Embedded Systems Automation, Embedded and Firmware , IOT, Electrical/Mechanical Engineering I am a TOP Rated Freelancer, and you can check my reviews here as well: https://www.freelancer.com/u/mzdesmag. Looking forward to potentially working together on this project. Thanks and Best regards, Adekunle.


The electronics and cable-integration aspects of this phone case align closely with my background as a Senior Electronics Engineer with over 8 years of experience designing, testing, integrating, and documenting embedded and hardware systems. I can contribute a strong engineering perspective to the fixed USB-C connection, inline microphone and earbud wiring, connector anchoring, and reliable cable routing within the case. My experience covers system integration, hardware design, simulation, validation, and technical documentation, which is relevant to coordinating the silicone shell with rigid inserts and ensuring the retractable mechanism supports the electrical assembly. I can also prepare clear assembly documentation and design notes covering materials, cable-path constraints, tolerances, and manufacturing considerations. I would be glad to apply this electronics and product-integration experience to develop a clean, production-oriented case assembly and supporting documentation for your molder and manufacturer.


Hi there ! Production-ready mechanical CAD is the core of my work, and I can develop your silicone phone case as a complete manufacturable assembly in SolidWorks or Fusion 360. My experience covers product design from concept through manufacture-ready detailing, including injection molding, CNC machining, 3D printing and other DFM requirements. I can model the silicone shell, rear cable compartment, retractable spool or track, sliding/hinged closure, rigid USB-C anchoring inserts and final assembly, while keeping the external phone-mating surfaces accurate to your stated ±0.2 mm target. I will also account for the camera and button cut-outs, MagSafe ring integration, smooth cable routing and the minimum 6 mm bend radius. The deliverables can include clean STEP files for each part and the assembly, an exploded view or PDF drawing set, and notes covering materials, draft, tolerances and tooling considerations. My SolidWorks, Fusion 360 and 3D CAD skills, combined with product design and injection-molding knowledge, make me well suited to turn this concept into a quote-ready design. I would be glad to develop the complete case and mechanism for you. Thanks & regards Gaurav Sharma.....


I am pleased to submit my proposal for your project requiring a production-ready 3D CAD model of a silicone phone case for the upcoming iPhone 17/18 Pro Max, featuring an integrated retractable wired headset system. With extensive expertise in SolidWorks, Fusion 360, and advanced product design, I am fully equipped to deliver precise, manufacturing-ready models that meet your exacting requirements. My experience includes designing tooling-ready silicone over-molded parts with integrated hard plastic inserts, alongside mechanisms featuring smooth cable retraction without sharp bends, ensuring functional efficiency and durability. I look forward to applying my skills to produce a technically robust, precise, and fully functional design tailored to your specifications. Kind regards, Muqadas


The iPhone case CAD starts with the silicone shell as its own STEP body, built from Apple's iPhone 17 Pro Max accessory drawings before any mechanism is added. The 750 AUD covers the posted scope for the 17 Pro Max. The 18 Pro Max is quoted separately once Apple publishes its dimensions. The first milestone is 150 AUD of that total, delivered within 8 working days. It is the shell STEP with the button, camera and MagSafe cut-outs. It is accepted when it opens error-free and its mating surfaces hold ±0.2 mm against the drawing. In the next milestones (600 AUD) you get the spool, door slider, USB-C insert, drawing set and molder note, with 2 revision rounds. The spool sits in a rigid insert, so the silicone only seals and never guides the cable through its 6 mm minimum bend. Do you have Apple's accessory drawing PDF for the 17 Pro Max? Price: 750 AUD fixed · Timeline: 8 working days from access/brief Konrad
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗