ANSYS Heat Exchanger Simulation
$250-750 USD
Posted 1 minute ago
•
Ends in 6 days
$250-750 USD
Paid on delivery
I need a full ANSYS Fluent heat-transfer study focused on the temperature distribution inside a tank. You will receive the cleaned STEP geometry, material properties. Your task is to import the model, build a high-quality mesh, set up the conjugate heat-transfer physics, run the solution to tight residual and energy balance convergence, and extract precise temperature contours through the fluid and solid walls. I also need hotspot locations, maximum and minimum wall temperatures, and temperature profiles at several user-defined cross-sections so we can verify design limits. Deliverables • Fluent *.cas and *.dat files with the final converged solution • Meshed geometry file (or Workbench project archive) • A brief PDF report summarising assumptions, boundary conditions, mesh independence check, convergence history, and annotated temperature plots Acceptance criteria: residuals below 1 × 10⁻⁶, stable energy balance, and temperature values within ±2 °C of any validation points I provide.
Project ID: 40826819
About the project
9 proposals
Open for bidding
Remote project
Active 5 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
9 freelancers are bidding on average $439 USD for this job


Hello, ANSYS and computational fluid dynamics are directly supported by our engineering team, including CAD/STEP processing, thermal analysis, finite element analysis, and technical reporting. This matches your need for a complete Fluent conjugate heat-transfer study from cleaned STEP geometry through a validated temperature report. Our team combines mechanical engineering, simulation, and CAD/CAM capability to handle the fluid and solid regions together, prepare a quality mesh, and deliver the requested Fluent case/data files or Workbench archive. We can also document assumptions, boundary conditions, convergence history, mesh independence, hotspot locations, wall-temperature extrema, cross-section profiles, and annotated temperature contours in a concise PDF report. Our broader team has completed 423 projects with a 4.9/5 rating from 354 verified reviews and a 99% completion rate since 2016. I would be pleased to apply this combined ANSYS, CFD, thermal-analysis, and reporting expertise to your heat-exchanger study and deliver a clear, reviewable simulation package. Thanks!


I can carry out the tank heat-transfer study in ANSYS Fluent using a conjugate heat-transfer (CHT) approach to capture temperature distribution in both the fluid and solid walls. I’ll start by importing your STEP geometry, defining the fluid and solid domains, and generating a quality mesh with appropriate refinement near walls and critical thermal regions. I’ll then configure the thermal boundary conditions, material properties and flow physics before running the simulation. Post-processing will include temperature contours through the fluid and tank walls, hotspot identification, maximum and minimum wall temperatures, and temperature profiles at your specified cross-sections. I’ll also perform a mesh-independence check and monitor residuals and energy balance to assess convergence. You’ll receive the final Fluent .cas and .dat files, mesh or Workbench archive, and a concise PDF report documenting the setup, assumptions, boundary conditions, convergence history and annotated results. Could you share the tank geometry, operating conditions, heat-transfer boundary conditions and any available validation measurements? Also, is the study intended to be steady-state or transient?


Hi, I'm Fernando, a developer from Mexico. The key to this study is getting reliable conjugate heat-transfer results, not just producing attractive temperature contours. Mesh quality, fluid-solid interfaces, and energy balance all need to be checked carefully before trusting the final temperature distribution. I can help with the Fluent workflow, including geometry import, mesh preparation, CHT setup, convergence monitoring, and extraction of wall temperatures, hotspots, and cross-sectional profiles. I'll also document the boundary conditions, modelling assumptions, mesh independence results, and convergence history so the report is useful for engineering review, not just presentation. One important point: I'll verify whether the residual and energy-balance targets are physically achievable for the supplied model rather than treating residuals alone as proof of accuracy. Could you share the operating conditions and any available validation data? Best regards, Fernando


Hi there, The key requirement is a reliable conjugate heat-transfer study that resolves fluid and solid-wall temperatures, verifies mesh independence, achieves residuals below 1 × 10⁻⁶, and documents hotspot and cross-section results against validation limits. I have strong hands-on experience with Engineering and have solved similar problems involving thermal analysis, convergence verification, and design-limit validation. My approach would be to: * Review the cleaned STEP geometry, material properties, boundary conditions, validation points, and current implementation. * Identify the root cause of any geometry, meshing, or convergence risks and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using the provided ANSYS Fluent simulation environment. * Test mesh quality, edge cases, reliability, energy balance, convergence history, temperature extrema, and cross-sectional extraction behavior. * Deploy or integrate the final solution without disrupting the existing system, delivering the converged case/data files, mesh or project archive, and annotated PDF report. For a conjugate heat-transfer model, residual reduction alone is not sufficient; I will also verify energy imbalance and monitor wall-temperature stability so the reported ±2 °C validation criterion is meaningful. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗