Wi-SUN RF Module PCB Design

£18-36 GBP / hour

Posted 1 minute ago

•

Ends in 6 days

£18-36 GBP / hour

Design RF IOT Modules for WiSUN for India / North America - project needs the schematic capture and PCB layout, in Altium Designer, of a low-cost Wi-SUN FAN 1.1 sub-GHz radio module for smart meters. The module is a re-spin of the existing EFR32FG25 module onto the larger-memory, OFDM-capable EFR32FG25B222F1920IM56, with a maximum transmit power of +16 dBm from the SoC's integrated PA. There is no external PA, and no additional power supply: the module runs from the host 3.3 V rail. The module keeps the existing outline, 29-pad LGA footprint and host pin-out, so it is drop-in compatible with existing hosts. Two band variants are built from one PCB, selected by fitted RF components: India: 865–868 MHz. North America and Paraguay: 902–928 MHz (one common design). Scope of Work In scope Altium Designer project set-up from the Customer's existing projects and templates. Schematic capture for both band variants, using Altium's Variant Manager for the band-specific parts. Component selection and library work (schematic symbols, footprints, 3D models, parameters). RF circuit design: balun, harmonic low-pass filter and RX matching starting values for 865–868 MHz and 902–928 MHz, from the reference design and Silicon Labs guidance. PCB placement and routing, including RF, crystal, DC-DC and decoupling layout. Design rule set-up, ERC and DRC clean-up, and the manufacturing output package. Three design reviews with the Customer (schematic, placement, routing). One post-prototype ECO round: component value changes from the Customer's RF tuning, and small layout fixes (Section 9).

Project ID: 40826426

About the project

8 proposals

Open for bidding

Remote project

Active 3 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

8 freelancers are bidding on average £27 GBP/hour for this job

User Avatar
Flag of PAKISTAN

Hello, Our embedded-systems and PCB design team has completed 423 projects since 2016, with electronics experience spanning RF, microcontrollers, circuit design and PCB layout. That background aligns closely with your Wi-SUN smart-meter module, including the EFR32FG25-based architecture, 3.3 V host supply, compact LGA footprint and two sub-GHz band variants. We can support the schematic capture, component and library work, RF matching and filter implementation, placement, routing, and design-rule clean-up required for an Altium-based module. Our team has developed 434 MHz RF, GSM/SMS, GPS and BLE hardware, built working prototypes tested on our own bench, and delivers complete schematics and documentation. We also work with clear milestone deliverables and can incorporate prototype tuning changes through an ECO round. I would be pleased to apply our circuit-design and PCB-layout experience to this drop-in Wi-SUN module and contribute through the schematic, placement, routing and review stages. Thanks!

User Avatar
Flag of UKRAINE

Hello, My 10+ years of experience in electronic hardware development and PCB design align directly with your Wi-SUN module re-spin, from schematic capture and component selection through layout, prototyping, testing, and manufacturing documentation. I can work from the existing EFR32FG25 project and preserve the required outline, 29-pad LGA footprint, and host pin-out for drop-in compatibility. My background includes multilayer PCB design, RF and wireless communication, IoT systems, component and footprint library creation, and DFM-focused manufacturing preparation. I can apply these skills in Altium Designer to develop the shared PCB with India and North America/Paraguay RF variants, including variant-specific components, balun and filter implementation, RF matching starting values, crystal, DC-DC, decoupling, ERC/DRC cleanup, and review-ready outputs. I also bring practical prototyping, troubleshooting, hardware modification, and product-development experience, which is valuable for incorporating RF tuning changes and completing the post-prototype ECO round. I would be glad to deliver a carefully documented, production-oriented design for this module. Thanks!

User Avatar
Flag of UKRAINE

Hello, Over 15 years of electronic engineering experience, including complex PCB design and IoT hardware, makes me well suited to develop your Wi-SUN RF module in Altium Designer. I can handle the complete schematic capture and PCB layout while preserving the existing outline, 29-pad LGA footprint and host pin-out for drop-in compatibility. My Altium Designer and circuit design experience covers component libraries, footprints, 3D models, RF-related placement and routing, power distribution, decoupling, crystal placement, and manufacturing-ready outputs. I can also work with Altium Variant Manager to support the India 865-868 MHz and North America/Paraguay 902-928 MHz configurations from one board design, including the band-specific RF components, balun, filtering and matching sections. My background in IoT solutions and industrial electronics supports the reliability required for smart-meter applications, while ERC/DRC cleanup and design reviews ensure a disciplined handoff. I am ready to contribute precise schematic, RF-conscious layout and production documentation for this re-spin, including the post-prototype ECO work. Choose me to develop this module with the technical care and clear communication your project requires. Thanks!

User Avatar
Flag of UNITED KINGDOM

On a sub-GHz module like this, the result is mostly decided by the RF section layout: balun and filter placement, a continuous ground reference under the RF path, and keeping the crystal and DC-DC loop away from the antenna feed. Matching values only work if the layout is right. I'd start from your Altium templates and the Silicon Labs reference design. I'd set up both band variants in Variant Manager, then place the RF section first and share it for the placement review before routing the rest. The first check is that the 29-pad footprint and host pin-out match the existing module exactly. I work in Altium and have designed sub-GHz wireless and other RF-related boards. Some of my PCB boards are in my portfolio. I can deliver the full package in about three weeks, including reviews and the ECO round.

User Avatar
Flag of VIETNAM

⭐⭐⭐⭐⭐ Hi there, Could you please confirm that you need a drop-in 29-pad Wi-SUN module redesign in Altium, supporting both India and North American band variants? The key focus is a reliable, low-cost RF module using the EFR32FG25B222F1920IM56, with careful RF matching, harmonic filtering, grounding, crystal, DC-DC, and decoupling layout. Maintaining the existing outline and host pinout is essential for compatibility. I have completed similar embedded RF and IoT hardware work involving schematic capture, component libraries, RF-aware PCB placement and routing, design-rule cleanup, and manufacturing outputs. ❓ Can you provide the existing EFR32FG25 module Altium files and Silicon Labs reference designs? ❓ Which manufacturer stackup and assembly rules should guide the layout? I will focus on clean RF return paths, variant-controlled components, manufacturability, and the post-prototype ECO process. I am ready to begin immediately and coordinate the three design reviews. I look forward to your reply and discussing the implementation. Best regards, Phuong Nam D

User Avatar
Flag of UKRAINE

Hi there, I’m Vadym, an Electronics Engineer with 10+ years of embedded and IoT RF design experience. I can set up your Altium Designer workspace from your existing templates, then deliver schematic capture and PCB layout for both Wi-SUN band variants using Variant Manager while keeping the same 29-pad LGA footprint and drop-in host pin-out. I’ll build the RF front-end around your EFR32FG25B222F1920IM56 (no external PA, host 3.3 V only), including balun, harmonic low-pass filter, and RX matching starting values aligned to the reference design and Silicon Labs guidance. Then I’ll handle placement/routing, DRC/ERC cleanup, manufacturing outputs, run three design reviews, and complete one ECO round for tuning/value changes and small layout fixes. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Vadym P.

User Avatar
Flag of CHINA

I can handle your EFR32FG25B222F1920IM56 Wi-SUN module re-spin in Altium Designer, setting up Variant Manager for the 865-868 MHz and 902-928 MHz matching networks and balun/harmonic filter based on Silicon Labs guidance. I will keep the exact 29-pad LGA outline and pin-out while carefully isolating the RF path, crystal, DC-DC, and 3.3 V decoupling, and deliver the initial schematic and layout draft within 2-3 days for your review. Are the existing Altium template files and target PCB layer stackup available to share so I can verify the 50-ohm RF trace geometry? Happy to work hourly or lock in an upfront fixed-price milestone once I review your files so your total budget stays predictable.

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab