Emergency landing on highway caused by engine failure

The pilot with his dog.

The pilot with his dog. Photo/Valdis Bumburs

An engine failure forced a small aircraft to make an emergency landing on Suðurlandsvegur, the main highway in South Iceland, in May last year.

This is according to the findings of an investigation by the Icelandic Transport Accident Investigation Board.

The aircraft was being ferried from the United States to the United Kingdom, with several stops along the way for rest and refueling. The pilot was accompanied by his dog.

Propeller stopped near Sandskeið airfield

At 10:54 p.m. on May 26, the aircraft took off from Reykjavík Airport after being refueled. According to the pilot, there were no unusual sounds or vibrations from the aircraft or its engine during the climb.

At 11:05 p.m., approximately 1.6 nautical miles southwest of runway 13 at Sandskeið Airfield, the engine failed, the propeller stopped, and an oil leak made it difficult to see through the windshield.

At 11:06 p.m., the pilot failed to spot the runway at Sandskeið Airfield as he glided westward over it at an altitude of 4,100 feet. Instead, he concentrated on finding a suitable landing spot on the highway.

Air traffic control did not inform the pilot about Sandskeið Airfield, which was the nearest airfield when the engine failure occurred.

As the aircraft landed on the road, its right wing struck a traffic sign and then scraped along the top of a guardrail. The aircraft came to a stop after passing the guardrail, near a large yellow road sign.

Neither the pilot nor his dog was injured.

Several motorists stopped at the scene and helped the pilot move the aircraft so that it did not completely block the road.

Engine removed and rebuilt

The investigation subsequently revealed that the aircraft had not undergone its annual inspections between 2022 and 2024.

This was because the engine had been removed and sent for inspection and rebuilding, a process that required numerous components to be replaced and others to be reconditioned. The work was not completed until the engine was rebuilt in 2025.

An examination of the engine crankcase's repair history revealed that it had previously undergone repairs before the engine was reassembled during its most recent overhaul.

Welding repair blocked oil passage

The Icelandic Transport Accident Investigation Board concluded that a welding repair carried out in the affected area had blocked an oil passage, causing the engine failure.

The blockage prevented oil from reaching the main bearing, passing through the crankshaft oil passage and reaching the connecting rod bearing.

In its safety recommendations, the board advised aviation authorities to issue an advisory circular or similar guidance emphasizing the importance of ensuring that welding repairs do not damage engine oil passages or other components of the lubrication system.

内容来自 Mbl.is - News in English,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅