Edge AI Motor health analayzer
$250-750 USD
Posted 1 minute ago
•
Ends in 6 days
$250-750 USD
Paid on delivery
I need an end-to-end edge AI solution that sits directly on an ESP32, small industrial gateway, or similar micro-computer mounted to an electric motor. It must pull vibration (accelerometer), current & voltage, and temperature streams in real time, run a lightweight model locally, and tell me—on the spot—if the motor is showing signs of bearing wear, imbalance, or overheating. Data acquisition and feature extraction have to run on-device; no cloud pass-through for inference. When the model flags an issue, the unit should immediately push an alert to a phone or web dashboard (MQTT, HTTPS, or WebSocket—whichever you feel is most robust for industrial settings). Normal operating values can stay local to save bandwidth. Please build, train, and optimise the model (TensorFlow Lite, Edge Impulse, or an embedded-friendly alternative is fine) and deliver firmware that compiles without paid libraries. Deliverables • Schematics or wiring diagram for the sensor suite • Well-commented firmware/source code and build instructions • Trained model file plus a short training report (dataset, features, accuracy) • Simple dashboard or sample mobile/web client that receives and displays the alert payload • Quick start guide so a technician can flash the device and see the first alert within minutes Acceptance A demo video or live session where the motor is forced into a known fault condition and the system correctly classifies it within a few seconds, with the alert reaching the dashboard, will serve as the hand-over milestone.
Project ID: 40826061
About the project
22 proposals
Open for bidding
Remote project
Active 5 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
22 freelancers are bidding on average $380 USD for this job


Hello, Over 15 years in electronic hardware and firmware engineering, including ESP32 embedded systems and industrial automation, makes me well suited to build your on-device motor health analyzer. I can develop firmware in C/C++ for real-time acquisition of vibration, current, voltage, and temperature data, with local feature extraction and embedded inference rather than cloud-dependent processing. My experience with ESP32, ARM Cortex, Python, MATLAB/Simulink, PCB design, and industrial communication gives me a strong foundation for the complete solution, from sensor wiring and firmware through model training support and MQTT-based alert delivery. I can also provide clear, commented source code, build instructions, a trained embedded-friendly model, training documentation, and a simple dashboard or client for displaying fault alerts. I am committed to delivering a practical, maintainable prototype that can be demonstrated under known bearing, imbalance, or overheating conditions. Choose me to develop and validate this complete edge AI motor monitoring solution. Thanks!


Hello. "ON-DEVICE MOTOR FAULT DETECTION WITH EDGE AI" — the important requirement is detecting motor faults locally, without sending raw sensor streams to the cloud for inference. I'd structure this around an ESP32 or industrial gateway, depending on the sampling rate and model requirements. The firmware would acquire accelerometer, current, voltage and temperature data, perform windowing and feature extraction locally, then run a quantized TensorFlow Lite Micro model. MQTT over TLS can deliver fault alerts to a lightweight dashboard, while normal readings remain on the device. The work would cover sensor wiring, acquisition and signal processing, dataset preparation, model training and evaluation, embedded optimisation, alert handling, source code, build instructions and technician documentation. I'd also keep fault classes and confidence thresholds configurable. One important point: reliable bearing-wear and imbalance classification requires representative motor data for normal operation and each fault condition. I would validate the model on separate test runs and report per-class results rather than promise accuracy before seeing the dataset. The live fault demonstration should use a controlled, safe test setup. Which motor type and operating range will be tested, and do you already have labelled vibration/current data or a motor rig for collecting fault examples? Looking forward to working with you.


Hi there, I see you're looking for an end-to-end edge AI solution that can analyze motor health using various real-time data streams. I can provide a firmware solution that will be built to acquire data from the accelerometer, current, voltage, and temperature, running an optimized lightweight model for quick on-site assessments. I'll ensure that the data acquisition and feature extraction processes run locally without cloud dependence, and I'll implement a solid MQTT or WebSocket integration to deliver alerts instantly to the designated dashboard. Additionally, I will encapsulate all deliverables, including schematics, the trained model file, and a user-friendly quick start guide. Regards, Ali


⚠️ If you're not happy, you don’t pay. ⚠️ Hi Client, thank you for checking my proposal and sharing the detailed project brief. I understand your project needs for an end-to-end edge AI solution. I can build your edge AI system using TensorFlow Lite on an ESP32 with a robust, low-latency design. I will deliver: • Comprehensive schematics for the sensor suite • Well-commented firmware and build instructions • Trained model file with a detailed training report (dataset, features, accuracy) • A simple mobile/web client dashboard for real-time alerts • Quick start guide for immediate technician deployment You will also receive a demo session showcasing the system's capabilities in a fault condition, ensuring confidence in performance. I am confident I can execute your vision professionally and efficiently. Looking forward to discussing the timeline and next steps. Best regards, Chirag Pipal


MQTT for telemetry and running the fault detection model on-device rather than round-tripping to a server is the right call here, it keeps latency low and the gateway usable offline. I would start with vibration and temp data on the ESP32, train a lightweight TFLite model for anomaly detection, then wire up MQTT publish with a simple dashboard. Can start today, working prototype in 6 days. Budget and timeline above are starting points based on the post, we will firm them up once we go through sensor specs and data volume together. Want me to send a quick scope doc?


Affordable, Early Delivery. ★★★★★★★★★★★★★★ I hold a Masters degree which gives me the requisite background to handle writing from various subjects. I am a highly committed person towards my work. You can rely on QualityXenter for quality and consistency in writing. We never violate copyright rules. I have vast amount of experience in this industry since I am working from 2015 as a professional writer. I provide many modifications till to get your satisfactions. I have access to enough journals to use in your research project. I always produce quality work at VERY LOW RATES so, don't worry if you have a low budget for your work, I will be very happy to make a new client like you. I am producing quality work for my clients including ARTICLE WRITING, REPORT WRITING, ESSAY WRITING, RESEARCH PAPERS, BUSINESS PLAN, TECHNICAL WRITING, MATLAB, THESIS, ACCOUNTING & FINANCE work ETC. Go through my profile link https://www.freelancer.com/u/qualityxenter


Hi there, The main challenge is delivering reliable motor-fault classification locally while keeping real-time sensor processing efficient and ensuring bearing-wear, imbalance, or overheating alerts reach a usable client quickly. I have strong hands-on experience with Machine Learning (ML), Web Development, and Android App Development, and have solved similar problems involving model-driven classification and real-time alert presentation. My approach would be to: * Review the sensor data, fault definitions, current implementation, and expected alert payload. * Identify the root cause of signal-quality or classification issues and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using an embedded-friendly ML pipeline with a practical web or Android alert client. * Test edge cases, reliability, performance, security, and integration behavior. * Deploy or integrate the fix without disrupting the existing system. For dependable fault detection, feature windows and alert thresholds should be designed together; otherwise noisy vibration readings can create false positives even when model accuracy looks strong. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable. I can start by reviewing the existing sensor data, model requirements, and current setup and proceed with the most practical solution. Best regards, Ian


Designing an end-to-end motor monitoring device requires strong embedded integration across sensing, firmware, electronics, and reliable field operation—areas aligned with my 8+ years as a Senior Electronics Engineer. My background includes embedded controllers, circuit design, firmware development in C/C++, power electronics, and complete hardware validation, allowing me to address the sensor interface and on-device processing as one dependable system. I can contribute the ESP32 or similar microcontroller firmware, real-time acquisition of vibration, current, voltage, and temperature data, embedded feature extraction, and integration of a lightweight locally running model. My experience carrying systems from concept through simulation, testing, documentation, and final implementation is directly relevant to the wiring diagrams, commented source code, build instructions, training documentation, and technician-focused quick-start guide you require. I can also integrate an MQTT, HTTPS, or WebSocket alert path and provide a simple dashboard/client for fault notifications. I am ready to apply my embedded systems and microcontroller expertise to deliver a practical motor-health demonstrator and support the fault-classification handover session.


Hi, Melih here >> "ESP32 EDGE AI MOTOR FAULT DETECTION" - you need real-time motor fault detection directly on the device, without relying on cloud inference. I’d use an ESP32 with vibration, current and temperature sensors, extracting signal features locally before running a lightweight TensorFlow Lite model. MQTT would send fault alerts to a simple dashboard while normal readings stay on-device. I’d prioritise reliable fault detection for bearing wear, imbalance and overheating, then validate each condition against labelled test data. Do you already have an ESP32 board, sensor hardware and motor fault dataset, or should these be included in the initial build? Looking forward to work with you.


==== Hi - Quy Dao here ==== "END-TO-END EDGE AI SOLUTION" - I will build an on-device motor health pipeline that acquires vibration, current, voltage, and temperature data, extracts features locally, and classifies bearing wear, imbalance, and overheating without cloud inference. I will deliver sensor wiring diagrams, commented firmware with reproducible build instructions, an optimized embedded model, and a training report documenting the dataset, features, and measured accuracy. I will also provide a simple alert dashboard/client and a quick-start guide. The alert path will use the selected protocol, while normal readings remain local. I’ll test compilation, real-time acquisition and inference, fault classification, and end-to-end alert delivery, then demonstrate a known fault condition in a live session or video. Estimated timeline: 4–6 weeks once the hardware, motor access, and suitable labeled data are available; it may vary with sensor integration and data collection needs. Looking forward to work with you.


Hello, "Edge AI Motor Health Analyzer" - the key is detecting early motor faults directly on the device, without relying on cloud inference or continuous data transmission. I'll approach this by separating sensor acquisition, local feature processing, fault classification and alert delivery into clear modules. The solution will need to account for vibration sampling, current and temperature readings, limited device memory, and reliable MQTT or HTTPS notifications. I can contribute to the Python data-processing pipeline, backend/API integration and alert dashboard. However, the embedded firmware, sensor interfacing and model training require specialist validation before I can commit to the complete implementation. Could you provide the motor specifications and available sensor models, and confirm whether you already have labelled vibration data for normal and faulty operating conditions? Kind regards, Beate


I see you require an end-to-end edge AI solution for monitoring electric motor health using an ESP32 or similar device. My experience includes building embedded systems and machine learning models optimized for on-device performance. I understand the need for real-time data acquisition and alert mechanisms using lightweight models like TensorFlow Lite. For your project, I propose: 1. Designing the sensor suite schematics and wiring diagrams to ensure accurate data capture. 2. Developing firmware that runs the model without cloud inference, pushing alerts via MQTT or WebSocket. 3. Creating a simple dashboard for alert management. 4. Documenting the process thoroughly for ease of deployment by technicians. You can view a similar project I developed here: I would start with identifying the most efficient sensor configurations and model parameters to ensure prompt fault detection. Let’s discuss the specific sensors you plan to use and the expected operational environment.


Hello, You need an on-device edge AI system mounted to an electric motor that samples vibration, current and voltage, and temperature in real time, extracts features and runs inference locally with no cloud pass-through, and pushes an immediate alert to a phone or web dashboard only when bearing wear, imbalance, or overheating is detected, while normal readings stay local. A technician also needs to flash the unit and see a first alert within minutes. For the stack, I would use an ESP32 with an MPU6050 or ADXL345 accelerometer, an SCT-013 current clamp with a ZMPT101B voltage sensor, and a DS18B20 or MAX6675 thermocouple, with features such as RMS, kurtosis, crest factor, and FFT band energies computed on-device and fed to a quantized TensorFlow Lite Micro model. Alerts would go over MQTT with TLS to a broker, since it is the most robust choice for industrial settings with intermittent connectivity and gives clean QoS and retained-message behavior, and the dashboard would be a lightweight web client subscribing to the same broker. Firmware and model would use only free and open libraries, with no paid dependencies. I can deliver results within 12 hours of receiving your motor specifications and target fault conditions for an initial build. Which motor type and voltage should the prototype target first, and do you already have a preferred MQTT broker or dashboard host? Best regards


Hello, This is a strong fit for me. I can help you build an end-to-end edge AI motor health monitoring system that runs directly on an ESP32 or small industrial gateway, with on-device vibration, current/voltage, and temperature processing, real-time fault detection, and instant alerting to a dashboard or phone. I’ve recently worked on a similar embedded monitoring setup where sensor data was processed locally on-device for anomaly detection, with MQTT-based alerts and a lightweight model optimized for edge deployment. I can bring that same practical approach here—keeping the firmware lean, the inference fast, and the deployment straightforward for technicians. I can deliver the wiring diagram, firmware, trained model, training notes, and a simple alert dashboard/client. I’ll also make sure the code is well-commented and buildable without paid libraries. A couple of points I’d like to confirm: 1. Do you already have the sensor hardware selected, or should I recommend a reliable industrial-grade sensor stack? 2. Would you prefer MQTT for the alert flow, or should I suggest the most stable option based on your environment? If helpful, I’d be glad to discuss the setup on a quick call. Best regards, Mehreen


Hello, I’d focus on building a TensorFlow Lite model optimized for the ESP32’s constraints, using a custom feature pipeline that runs entirely on-device to avoid latency. I’ve deployed a similar system for a predictive maintenance client—it ran a lightweight CNN on an STM32 with 92% accuracy on bearing fault detection, though the firmware had a minor memory leak that was fixed in post-launch updates. The architecture would use a two-stage pipeline: real-time FFT-based feature extraction on the raw sensor streams, followed by a quantized model that outputs fault probabilities. This keeps inference under 50ms while minimizing power draw, and the alerts would go through MQTT with WebSocket fallback for dashboard updates. The biggest win is reducing false positives by 40% compared to threshold-based systems, which cuts unnecessary maintenance calls. After deployment, I’ll provide a 30-day support window to refine the model based on real-world data and fix any edge cases in the firmware. If this approach aligns with your needs, I can share a rough timeline for the demo setup. Thanks, Marcio.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗