ESP32 Custom PCB Design Review
$2-8 USD / hour
Posted 1 minute ago
•
Ends in 6 days
$2-8 USD / hour
I am looking for a skilled, cost-effective, and deadline-oriented electronics engineer to transition my working ESP32 DIY setup into a custom PCB. Before starting the board layout, I want to collaborate with you to review my current circuit—discussing the pros and cons of my design, identifying any electrical or hardware limitations, and recommending practical improvements for reliability and manufacturability. I value clear communication and need someone willing to walk me through the technical reasoning behind suggested changes so we can mutually finalize the schematic and PCB layout. Please share examples of past ESP32 or microcontroller PCB projects you have designed, along with your estimated turnaround time and pricing. Core Components:ESP32 module (e.g., ESP32-WROOM-32, ESP32-S3) and connected peripherals (relays, RTC, SD card module, sensors, displays). Power Supply: DC 5V for the esp board/ or a converter integrated from 220v ac to 5v dc. Physical Constraints: Maximum board dimensions, mounting hole requirements, or specific enclosure fit. Deliverables Needed: Schematic, PCB layout files, BOM (Bill of Materials), and manufacturing files Gerber/Pick-and-Place.
Project ID: 40825821
About the project
7 proposals
Open for bidding
Remote project
Active 9 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
7 freelancers are bidding on average $10 USD/hour for this job


Hello, My 10+ years in electronics and PCB engineering make me well suited to turn your working ESP32 setup into a reliable, manufacturable custom board. I have developed embedded systems and industrial electronics involving ESP32, sensors, ADC systems, I2C/UART, relays, power supplies, and electrical protection, directly matching the peripherals and power considerations in your project. My experience covers the complete hardware cycle: reviewing and improving schematics, selecting components, creating footprints, PCB layout, DFM optimization, prototyping, testing, troubleshooting, and preparing manufacturing documentation. I can assess limitations in your current circuit, explain the engineering reasoning behind recommended changes, and produce the schematic, PCB files, BOM, Gerbers, and Pick-and-Place files. My background in industrial automation and small-batch manufacturing also helps me design for practical reliability rather than only bench-top operation. I am ready to provide focused, cost-effective engineering support for your ESP32 PCB and collaborate through a technically sound final design. Thanks!


Hello, Over 15 years in electronic hardware and firmware engineering makes me well suited to review your ESP32 DIY circuit before it becomes a production PCB. I work with ESP32, ARM Cortex, STM32 and AVR systems, and can assess the schematic for power integrity, peripheral interfacing, communication buses, component selection, reliability and manufacturability before layout begins. My PCB design experience includes Altium Designer, KiCad and Eagle, with embedded work involving I2C, SPI, UART, CAN and Ethernet. This aligns well with your ESP32 peripherals such as relays, RTC, SD card, sensors and displays, as well as the 5V supply or integrated AC-to-DC option. I can contribute to the schematic, PCB layout, BOM and Gerber/Pick-and-Place outputs while clearly explaining the technical reasoning behind recommended changes. Experience across industrial automation, automotive, medical devices and consumer electronics supports a practical, production-focused review. I am ready to help turn your working setup into a reliable, manufacturable ESP32 PCB and would welcome the opportunity to discuss the project and provide a realistic turnaround and cost. Thanks!


With ESP32 boards, most problems come from the power stage and the strapping pins, not the layout itself. Relay switching noise resetting the module, weak 3.3V rails during Wi-Fi bursts, and GPIOs that block boot are the usual traps. I'll start by reviewing your schematic and explaining each change and why. Then I'll design the final schematic and PCB with BOM, Gerbers and pick-and-place files. If you use mains 220V, I'll use a certified AC-DC module and keep proper isolation. I've done a lot of microcontroller board work, including ESP32 designs, and some of my boards are in my portfolio. I'd expect the review in about 2 days and the full board in about 4 days. Which relays and loads will you switch?


We can take the enclosure and mechanical side of this off your hands: a 3D model of the board outline, mounting holes and connector positions in Fusion 360 or SolidWorks, with a fit check against your enclosure and a STEP export, so the PCB layout starts from correct dimensions. What we can do in an hourly review: - Build the board outline, mounting holes and keep-out zones from your sketches, photos or measurements - Check the physical fit of the relays, SD card module, display and DC connectors inside the case - Export STEP files and dimensioned PDF drawings for your PCB designer We do not design circuits or lay out PCBs, and the 220 V AC to 5 V section should be reviewed by a qualified electrical engineer before any board is made, so we would not cover the electrical review or the Gerber and pick-and-place files. What are the maximum board length and width, and which enclosure model will the board go into? Shazia, BlueGrid Studio


My background in Electrical Engineering and Electronics aligns directly with reviewing and refining your ESP32-based circuit before it becomes a manufacturable custom PCB. I can assess the current design for practical electrical and hardware limitations, evaluate the integration of peripherals such as relays, RTC, SD cards, sensors, and displays, and help identify improvements that support reliable operation. As a Senior Software Engineer with over 10 years of experience delivering reliable and scalable technical solutions, I bring a structured engineering mindset and clear communication to complex projects. I will explain the reasoning behind recommended changes in straightforward terms so the schematic and final design decisions are mutually understood. My electronics experience also supports attention to power considerations, component selection, and the transition from a working DIY setup toward production-ready documentation. I would be glad to contribute as a reliable technical partner for your ESP32 PCB design review and help establish a sound foundation for the schematic, layout, BOM, and manufacturing files.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗