Scan-to-CAD: 3D-printed interior door panel from a door scan (1956 Ford F100)
$90-180 USD
Posted 1 minute ago
•
Ends in 6 days
$90-180 USD
Paid on delivery
We are a large-format 3D printing company in Johannesburg, South Africa. This is a paid practical test: designers who do strong work may be offered ongoing or permanent CAD work with us. The job: - Work from a raw 3D scan (STL, about 4.4 million triangles) of the bare inner door skin of a 1956 Ford F100. - Design a 3D-printed left-hand door panel that a trimmer will cover in leather: a smooth face with ribs and hidden clip fixings on the back. - Fit all existing holes in the door skin from the scan to +/-0.5 mm and produce a hole table. - Build a fully parametric model (named parameters for skin, ribs, offsets and so on), then mirror it to make the right-hand panel. - Deliver STEP, STL and native files, a drawing (PDF), a hole table, a clearance map against the scan, and a short method note with a time log. Requirements: - Strong scan-to-CAD and parametric solid modelling experience - Automotive interior or trim panel experience is a big plus - Submission within 3 working days of receiving the files The scan and full design brief are confidential. They will be shared privately with shortlisted bidders only. In your bid, tell us which software you use and show one similar scan-to-CAD or automotive job.
Project ID: 40825717
About the project
2 proposals
Open for bidding
Remote project
Active 16 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
2 freelancers are bidding on average $98 USD for this job


Hello, I can turn your 1956 Ford F100 door-scan into a clean, fully parametric trim-ready CAD panel with accurate hole alignment, hidden rear clip features, and a mirrored right-hand version. I work regularly with scan-to-CAD data and automotive-style surface/solid modelling, and I’ll keep the model organized with named parameters for skin, ribs, offsets, and fixings. I’ll start by cleaning the STL reference, extracting the hole pattern, building the master left-hand panel, then validating fit with a clearance map and hole table. You’ll receive a production-ready package with STEP, STL, native CAD, PDF drawing, and a short method note with a time log. I use SolidWorks and Geomagic Design X for this type of work. Have you already defined the preferred clip hardware, or should I propose a suitable hidden fixing layout? Please have a look at our Freelancer portfolio through the links given below. https://www.freelancer.com/u/CreativeDesign50 Best regards Kirandeep K.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗