KiCad ESP32 PCB
$30-250 USD
Posted 1 minute ago
•
Ends in 6 days
$30-250 USD
Paid on delivery
KiCad PCB design – ESP32-S3 battery-powered device (schematic review + layout) Project: Round PCB (approx. Ø74 mm) for a waterproof device. 1-cell Li-ion 21700 (6 Ah), 3 A USB-C charger (BQ25895), cell protection (BQ29700 + dual MOSFET), fuel gauge (MAX17048), 3.3 V buck-boost, 5 V boost for a laser TOF sensor, ESP32-S3-WROOM-1 (antenna on module or uFl antenna), 24 addressable LEDs (SK6812MINI), push button. Available: KiCad schematic (v0.4, ERC clean), BOM with footprints, 3D enclosure (STEP) with all mechanical constraints. Scope: Review the schematic and propose fixes (power, protection, USB-C, ESP32 boot/USB). Finalise the open parts (USB-C waterproof receptacle, battery clip footprint). Board outline from the STEP file, placement respecting the enclosure (battery clips, TOF sensor, USB-C, antenna keep-out). Routing (2 or 4 layers, your recommendation), DRC clean. Fabrication outputs for JLCPCB assembly: Gerbers, BOM, CPL. Requirements: KiCad 8 or 9. Experience with ESP32 RF layout, switching regulators and Li-ion charging/protection. All source files and IP transferred to the client.
Project ID: 40824841
About the project
11 proposals
Open for bidding
Remote project
Active 5 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
11 freelancers are bidding on average $182 USD for this job


Hi, I understand you need a round PCB for an ESP32-S3 battery device, with the power, charging, protection, fuel gauge, sensor, LEDs, USB-C, and enclosure limits handled carefully. I can review the schematic, check the battery and USB-C sections, complete the open footprints, place parts around the STEP constraints, and finish the PCB layout with clean routing and fabrication files. My work covers Electronics, Electrical Engineering, PCB Layout, and Assembly requirements, including attention to antenna clearance, regulator paths, LED current, and connector access. I will also check the design rules and prepare the Gerbers, BOM, and CPL for JLCPCB. Please confirm the preferred KiCad version and whether the current schematic and STEP files are final. Would you prefer a 2-layer or 4-layer board, and are there fixed stack-up, impedance, or antenna-clearance rules from your manufacturer? Please start the chat and let’s discuss the board details and delivery plan.


Hello, Your ESP32-S3 battery-powered board requires careful integration of RF, power electronics, charging, protection, and enclosure constraints, and my 10+ years of electronics and PCB design experience covers this complete development cycle. I work with ESP32, low-power electronics, sensors, embedded systems, schematic design, multilayer PCB layout, and component/footprint engineering. I can review the KiCad schematic for the BQ25895 charger, BQ29700 protection, MAX17048 fuel gauge, buck-boost and boost power sections, USB-C, ESP32 boot/USB circuitry, and LED power distribution. My experience with power supplies, power electronics, wireless communication, DFM, 3D CAD, and mechanical/electronic product integration is well suited to shaping the round PCB around the STEP enclosure, battery clips, antenna keep-out, USB-C and TOF sensor placement. I can deliver a fabrication-ready KiCad design with clean DRC and JLCPCB Gerbers, BOM and CPL, while transferring the complete source files and IP to you. I would be glad to take responsibility for this PCB from schematic review through manufacturing documentation. Thanks!


My combination of Circuit Design, Electronics, Electrical Engineering, PCB Layout, Mechanical Design, and Product Design is well suited to your ESP32-S3 device, where the electrical design must work within strict round-board and waterproof enclosure constraints. I can contribute to reviewing and refining the KiCad schematic, including the Li-ion charging and protection sections, power regulation, USB-C, ESP32 support circuitry, and sensor/LED connections. My Mechanical Design and Product Design skills are especially relevant for translating the STEP enclosure into an accurate board outline and ensuring the battery clips, USB-C receptacle, TOF sensor, antenna keep-out, and other components fit correctly. I can also handle the PCB layout and prepare fabrication-oriented design outputs using the provided BOM and footprints. I would be glad to apply my electronics and mechanical design skills to deliver a clean, manufacturable KiCad PCB project with the required source files transferred to you.


Hi there, regarding the KiCad PCB design project, I see that you're looking for someone to review the schematic and finalize the layout for a battery-powered ESP32-S3 device. Given your specifications, I’m confident in my ability to assist with the review of the power management components and the placement of the USB-C waterproof receptacle alongside the battery clip footprint. I'll also ensure that the board outline mirrors the provided 3D enclosure effectively, respecting all mechanical constraints. For the routing, I propose a four-layer design to handle the necessary signal integrity and power lines. I can ensure fabrication outputs for JLCPCB assembly, including Gerbers and BOM, are also part of the deliverables. Let’s work together to make this project successful! Regards, Ali


With a 3 A charger, a boost converter and the ESP32 antenna on a 74 mm round board, the layout order matters most. I'd start with the schematic review, then place around the battery clips, USB-C and antenna keep-out, and route the power stage first. You'd get a DRC-clean KiCad 8 project, Gerbers, BOM and CPL for JLCPCB, with all source files handed over. I've done a lot of Li-ion charging, battery protection and ESP32 board work, and some of my PCB boards are in my portfolio. First version in about a week.


Hello, this is exactly the kind of board I work on: round, battery-powered, KiCad, JLCPCB assembly. My recent work includes a round 4-layer KiCad board with Li-ion charging, a boost converter and a high-voltage driver, delivered with ERC/DRC clean files and JLC BOM/CPL. How I would do yours: 1. Schematic review with a written list of findings: BQ25895 (ILIM/OTG, input protection, thermal), BQ29700 + dual FET (sense, ratings for 3 A charge and boost peaks), MAX17048 (ALRT/QSTRT, cell sense), buck-boost and 5 V boost (inductor/cap selection, enable sequencing), USB-C (CC resistors, ESD, waterproof receptacle choice), ESP32-S3 boot/strapping and native USB, SK6812 supply and level shifting. 2. Finalise open parts with JLC-available alternatives where possible (waterproof USB-C, 21700 clip footprint). 3. Outline imported from your STEP, placement against the enclosure: clips, TOF window, USB-C, antenna keep-out at the edge with no copper under the module antenna. 4. Layout: I recommend 4 layers (solid ground under the switchers and RF, cleaner return paths), routed and DRC clean in KiCad 8/9, 3D check against the STEP. 5. Outputs: Gerbers, BOM and CPL in JLC format, plus all source files; full IP is yours. About 10 days for review + layout. Is the TOF sensor a module on a connector or a bare part on this board, and do you have a target thickness or layer-count/price limit for JLC?
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗