Construction Defect Repair Negotiation

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

Dear Counsel, We are the original purchasers and homeowners of the newly constructed two-story residence located at 341 Appaloosa Drive, Ferris, Texas 75125, which was signed for on April 29, 2024, and closed on April 30, 2024. Since taking possession of the residence, the property has suffered severe, ongoing structural and construction failures that render the home defective and breach both express and implied warranties under Texas law. I. DESCRIPTION OF MAJOR CONSTRUCTION DEFECTS The specific construction defects affecting the residence include, but are not limited to, the following: Catastrophic Foundation Slab Failure: The concrete foundation slab exhibits severe, active structural cracking and movement across the footprint of the home. Bowing Exterior Garage Brick Wall & Structural Framing Issues: The exterior brick veneer on the garage wall is visibly bowing outward, accompanied by a sagging brick wall, compromised structural steel support over the garage door, and out-of-square corner framing. A cracked lower corner of the load-bearing brick wall. Extensive Interior Tile Cracking: Directly resulting from slab movement and improper installation using rigid, non-flexible setting materials, flooring tiles throughout the entire ground floor have cracked and continue to crack progressively. Widespread Drywall, Ceiling, and Exterior Concrete Failures: Severe stress cracking is present throughout the interior drywall and ceilings across both stories, alongside premature cracking and failure of the exterior concrete driveway. II. INDEPENDENT ENGINEERING FINDINGS & PRIOR WARRANTY DENIAL To objectively verify the severity of these defects, we retained an independent, licensed structural engineering firm—Crosstown Engineering (Dallas, Texas)—to inspect the property. Crosstown Engineering documented the structural and material failures and confirmed that the defective conditions—specifically including the rigid tile installation over an active slab—will continue to deteriorate and crack indefinitely unless properly remediated. Despite providing documentation of these defects, both Lillian/Gravity Homes and the third-party structural warranty administrator, Maverick Warranties, wrongfully denied our warranty claims on the basis that the damage is allegedly "non-structural." Attempting to classify a failing slab, bowing exterior masonry, and compromised structural steel as "cosmetic" or "non-structural" is contradicted by physical evidence and independent engineering findings. Breach of Contract under the Residential Purchase Agreement executed on April 29, 2024; Breach of Express Warranties and Breach of the Implied Warranties of Good and Workmanlike Construction and Habitability; Full structural foundation stabilization and repair; Reconstruction of the bowing garage masonry, structural steel header, and framing; Complete removal and proper replacement of all damaged ground-floor tile using appropriate crack isolation/flexible materials, along with full drywall, ceiling, and driveway remediation; Reimbursement of our out-of-pocket expenses to date, including our $470.00 independent engineering inspection fee; and Compensation for the permanent diminution in market value ("stigma damages") resulting from major foundation failure on a newly constructed home.

Project ID: 40824593

About the project

13 proposals

Open for bidding

Remote project

Active 6 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

13 freelancers are bidding on average $424 USD for this job

User Avatar
Flag of INDIA

Structural engineering and construction expertise are central to evaluating the foundation, garage masonry, framing, and related defects described at your Ferris residence. My background covers civil engineering, structural engineering, construction, building architecture, and detailed AutoCAD drafting, allowing me to prepare clear technical documentation that supports your position in negotiations with the builder and warranty administrator. I can assist with documenting the reported slab movement, bowing brick wall, steel header and framing concerns, tile and drywall cracking, ceiling damage, and driveway failures through precise construction drawings and engineering-focused visual material. My experience with architectural and structural modeling tools, including AutoCAD, Revit, Tekla, Rhino, and Abaqus, supports accurate presentation of conditions, repair scopes, and the relationship between visible damage and underlying construction issues. I am ready to apply my construction and structural expertise to help present a professional, evidence-based repair and negotiation package for this serious residential defect claim.

User Avatar
Flag of EGYPT

Hello, Structural engineering and building-architecture expertise make me well suited to help document and present the construction failures affecting your Ferris residence. My skills include Civil Engineering, Structural Engineering, Building Architecture, and AutoCAD, directly relevant to the slab movement, bowing garage masonry, structural steel concerns, framing issues, and resulting interior and exterior damage described in your claim. I can help translate the independent engineering findings and observed conditions into clear, technically organized materials supporting your repair negotiation, including the relationship between foundation movement, tile cracking, drywall and ceiling failures, and driveway damage. My architectural and AutoCAD capabilities also support accurate visual documentation of the affected areas and the scope of proposed remediation, while keeping the presentation clear for counsel, the builder, and the warranty administrator. I am ready to apply my structural and construction-focused skills to strengthen the technical presentation of your claim and support a professional repair negotiation. Thanks!

User Avatar
Flag of PAKISTAN

Hello, Foundation, masonry, framing, and slab failures require more than general construction knowledge, they require structural engineering and civil analysis. My team combines Structural Engineering, Civil Engineering, Building Architecture, and AutoCAD with practical experience in CAD and engineering analysis, including SolidWorks, AutoCAD/Civil 3D, Revit, ABAQUS, and ANSYS through our broader technical team. That background is directly relevant to evaluating the reported slab movement, bowing garage masonry, structural steel header, out-of-square framing, tile cracking, and related drywall and concrete damage. We can help organize the engineering evidence into a technically clear, well-supported repair and negotiation package, while distinguishing structural conditions from cosmetic claims and documenting the connection between the underlying failures and resulting damage. Our team is US-registered, has completed 423 projects, and maintains a 4.9/5 rating from 354 verified reviews. I am prepared to apply this multidisciplinary engineering and technical-reporting capability to your construction-defect matter and support a strong, evidence-based repair negotiation. Thanks!

User Avatar
Flag of UNITED STATES

Hello, Structural engineering expertise focused on buildable, code-conscious solutions makes me well suited to assess and document the foundation, framing, masonry, and related construction failures described at this Texas residence. My work supports homeowners, architects, developers, and contractors through structural plans, framing layouts, load analysis, and detailed construction documents. I understand how foundation movement can affect connected building elements, including garage framing, masonry, finishes, and interior layouts. My background in structural engineering, civil engineering, building architecture, construction, and construction management enables me to evaluate these conditions as an integrated system rather than treating visible cracking as isolated cosmetic damage. I can also prepare clear AutoCAD-based documentation that helps communicate the observed defects, required structural repairs, and construction scope during negotiations. I am prepared to apply this architectural and structural perspective to your defect documentation and repair negotiation materials with accuracy and professional clarity. Thanks!

User Avatar
Flag of UNITED STATES

Hello, The combination of civil and structural engineering expertise and construction-focused analysis is directly relevant to evaluating the foundation, masonry, framing, and slab-related failures described at this residence. I provide structural calculations, engineering analysis, detailed drawings, and permit-ready documentation for residential construction issues, with skills spanning structural engineering, civil engineering, building architecture, and construction management. My experience with structural integrity assessments can support a technically clear evaluation of the reported slab movement, bowing garage wall, steel header concerns, cracking, and related finish damage. I can prepare organized engineering documentation that connects observed conditions to structural and construction deficiencies, helping present the repair scope and supporting evidence clearly during negotiation. I am ready to apply my structural engineering and construction expertise to this matter and provide professional documentation that strengthens your position. Thanks!

User Avatar
Flag of UNITED STATES

HI, Structural foundation failures, slab movement, masonry distress, and compromised framing require technical analysis—not merely a cosmetic assessment. My background in structural and civil engineering includes structural analysis, load calculations, steel and reinforced-concrete design, and foundation systems for residential construction, directly matching the conditions described at 341 Appaloosa Drive. I can provide technically grounded support for evaluating the reported slab cracking, bowing garage brick wall, steel header, out-of-square framing, tile failure, drywall distress, and driveway cracking. My experience preparing construction documents, technical specifications, and detailed engineering documentation can help clearly connect observed damage to structural performance, constructability, code considerations, and the scope of repairs. AutoCAD and construction management skills further support accurate documentation of the defects and proposed remediation. I am well positioned to assist with the technical evaluation and repair negotiation package, giving your counsel a clear engineering basis for pursuing appropriate corrective work and associated costs. Select me to bring a multidisciplinary structural and construction perspective to this matter.

User Avatar
Flag of UKRAINE

Hi there, As a Structural Engineer (P.E.) with 10+ years in residential and commercial code-compliant design, I can help you build a persuasive engineering-backed negotiation position for the severe defects at 341 Appaloosa Drive, Ferris, Texas. I’ll translate Crosstown Engineering’s findings into clear, client-ready technical support focused on how the slab failure, bowing masonry, compromised structural steel, and progressive tile cracking undermine structural integrity and habitability, strengthening your breach/warranty arguments and remediation scope. You’ll get a structured narrative that aligns the observed distress with engineering causes, expected deterioration, and practical repair pathways, supporting reimbursement and diminution-in-value claims. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Vadym P.

User Avatar
Flag of UNITED STATES

Hi, Dear. I am a licensed structural engineer with experience in construction defect negotiations similar to your project. ✅ Expertise in Building Architecture ensures thorough assessments of structural failures. ✅ Strong background in Civil Engineering aids in understanding foundational issues and repairs. ✅ Knowledge of Property Law facilitates effective negotiation strategies for warranty claims. ✅ Proficient in AutoCAD for accurate documentation and design adjustments. ✅ Experience in Construction Management helps in coordinating repair efforts efficiently. Successfully handled various construction defect cases, helping homeowners achieve favorable settlements and repairs. I will provide a comprehensive strategy that addresses all construction defects and warranty claims effectively. Send me a message to discuss in detail. Thank you.

User Avatar
Flag of UNITED STATES

Hi, I am a licensed Professional Engineer with 15+ years of experience in residential structural assessments, foundation failures, construction defect investigations, and engineering reports in Texas. I hold a Texas PE license and understand you need an independent structural evaluation of your two-story residence in Ferris, TX, to document serious foundation, masonry, framing, and construction defects for a warranty dispute. I am ready to get started on your project. I will review the existing engineering findings, assess slab movement, garage wall bowing, steel header deficiencies, and associated damage, and prepare a detailed technical report identifying probable causes, structural concerns, and recommended corrective measures. Please share the Crosstown Engineering report, construction plans, photographs, and warranty correspondence. Best regards, Steven

User Avatar
Flag of UNITED STATES

My 15+ years of experience in structural engineering, construction documentation, and legal-support work make me well suited to help document and present this construction-defect dispute. I can connect the reported slab movement, bowing garage masonry, structural steel concerns, tile failures, and widespread cracking with clear technical documentation rather than treating them as isolated cosmetic issues. My background includes civil and structural drafting, structural analysis, technical reports, construction drawings, contract documentation, legal research support, formal correspondence, and case-file organization. I can help organize the purchase and warranty records, engineering findings, photographs, repair demands, and claimed expenses into a professional negotiation package. Proficiency with AutoCAD, ETABS, SAP2000, Bluebeam, and Adobe Acrobat also supports accurate review and presentation of plans, reports, and visual evidence. I would be pleased to apply my engineering and legal-documentation experience to strengthen your position in negotiations with the builder and warranty administrator.

User Avatar
Flag of UNITED STATES

Hi, Thank you for the detailed description of the severe structural defects at 341 Appaloosa Drive. I understand the frustration and concern this situation causes. As a Lead Architect & Structural Engineer with over 20 years of licensed experience across multiple US states, I am uniquely qualified to provide the technical authority and litigation support you need. My practice specializes in forensic analysis, construction defect resolution, and providing expert testimony. I am proficient in AutoCAD for creating definitive exhibit drawings and have a deep understanding of property law and construction standards, particularly the implied warranties of habitability and good workmanship in Texas. My approach will be to conduct a thorough review of your existing documentation, the Crosstown Engineering report, and all correspondence with the builder and warranty company. I will then prepare a clear, powerful technical summary that irrefutably categorizes each failure as structural, directly countering their "cosmetic" denial. This will form the backbone of your negotiation, providing the expert leverage required to secure the comprehensive remediation and compensation you deserve, including stigma damages. I am ready to apply my dual architecture and engineering expertise to your case. Best Regards, Shawn

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab