VLAN Segmentation for Staff & Guests

£250-750 GBP

£250-750 GBP

Paid on delivery

I’m ready to cleanly separate the traffic on my existing wifi network. The goal is simple: place all staff computers and office devices on one VLAN while pushing every guest Wi-Fi user onto another that can reach the internet only—no visibility of, or access to, anything on the staff side. Guest users will authenticate with a password. Staff will authenticate using their AD credentials using the Radius client on the WAP authenticating to a Synology Radius Server (the server is already set up). We use an ASUS ExpertWifi EBM68 for all wifi connections. This is connected to a Netgear TEG240WS Switch and a Sophos UTM9.0 firewall/gateway connected to the internet. Other services (eg DHCP, DNS, AD, NAS etc) are provided by servers with wired connections to the switch. You will review this configuration and provide me with written instructions detailing all the changes necessary to the Asus, Netgear and Sophos to create the new VLANs, assign the correct ports/SSIDs, and write any access-control or firewall rules necessary to enforce the isolation and achieve a working solution. You will provide a document that shows the final topology, the exact commands or GUI steps I will need to follow, and a quick validation checklist. Please confirm hardware compatibility before starting this. I will back up the original setups, and make all necessary changes that you indicate but be prepared for a short remote walk-through once everything is live.

Project ID: 40824496

About the project

27 proposals

Remote project

Active 1 min ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

27 freelancers are bidding on average £392 GBP for this job

User Avatar
Flag of INDIA

Hi, As per your requirement, I can review your ASUS EBM68, Netgear TEG240WS and Sophos UTM 9 setup and give you the full written guide to split staff and guest traffic. First I'll confirm compatibility: that the EBM68 can map the guest SSID and the WPA2-Enterprise staff SSID to separate VLAN tags (802.1Q), that the TEG240WS ports can be set as trunk/access, and that the UTM can take VLAN interfaces on its LAN port. Then the document will cover the final topology, the exact GUI steps for each device (VLAN IDs, port tagging, SSID-to-VLAN mapping, RADIUS to your Synology), DHCP/DNS for the guest VLAN, the Sophos firewall rules so guests get internet only with no access to the staff side, and a short validation checklist. I'm happy to do the remote walk-through once it's live. I have 10 years of experience in networking and firewalls, and I've done this type of project many times, for example VLANs with separate staff/guest SSIDs and guest Wi-Fi on HPE Aruba switches and APs for a hotel, and Sophos firewall setups for clients in Germany and Egypt. I can start now. Let me handle this. Thanks. waiting for your response Manoj Malviya

User Avatar
Flag of TURKEY

To begin with, ensuring VLAN segregation between your staff and guest networks is crucial. I will help you configure the ASUS ExpertWifi EBM68, Netgear TEG240WS Switch, and Sophos UTM9.0 firewall to create separate VLANs for staff and guests. This includes assigning specific ports and SSIDs, implementing access-control policies to secure the staff side, and allowing guest users only internet access with password authentication. After confirming hardware compatibility, I'll provide a detailed document with configuration steps and a validation checklist to ensure everything is functioning as intended. Also, I’m available for a short remote walkthrough once the setup is live to address any immediate questions. Regards, Ali

User Avatar
Flag of NORWAY

Does the EBM68 hand out separate VLAN tags per SSID on the firmware you're running, or only in router mode? That decides whether the staff/guest split lives on the AP or has to be forced at the switch, so I'd check it before writing anything. The same goes for the rest of the chain. The TEG240WS needs to take a tagged trunk to the AP with access ports elsewhere. The UTM 9 needs two VLAN interfaces, each with its own DHCP/DNS and a guest-to-LAN deny rule. The staff SSID then uses WPA-Enterprise against the Synology RADIUS, with AD behind it. I haven't run this exact AP and switch pair, so the check is where any surprises show up. The runbook gets written around what it finds, port by port with the GUI steps. M1: hardware compatibility check of all three devices, 211 GBP M2: topology diagram and port-by-port runbook, 214 GBP M3: validation checklist and short walk-through, 215 GBP Total 640 GBP. That holds if it's one site with a single EBM68, TEG240WS and UTM 9 and no extra APs or switches. It also assumes the Synology RADIUS and AD already work, so I only document the Asus RADIUS client settings, and that you want written instructions rather than me changing your devices. If any of that differs, I'll re-quote before any work starts. Which firmware is the EBM68 on, and is it running as a router or in AP mode?

User Avatar
Flag of MEXICO

Hi, I'm Fernando from Mexico. The important part of this setup is ensuring VLAN separation is enforced at the switch and firewall level, not just by assigning different Wi-Fi names. I'd first review the exact capabilities and VLAN configuration of the ASUS EBM68, Netgear TEG240WS, and Sophos UTM 9.0 to confirm compatibility before recommending any changes. Then I'll prepare a clear network topology showing the staff and guest VLANs, SSID mapping, switch port assignments, DHCP requirements, and firewall rules. Staff authentication will use the existing Synology RADIUS and Active Directory setup, while guest traffic will be restricted to internet access only. You'll receive a step-by-step configuration document, exact GUI instructions or commands, and a validation checklist, followed by a remote walkthrough if needed. Estimated timeframe: 3–5 days. Estimated budget: £450. Fernando

User Avatar
Flag of BANGLADESH

Hi there, Reading your VLAN segmentation for staff & guests post, the key detail is that the goal is simple: place all staff computers and office devices on one VLAN while pushing every guest Wi Fi user onto another that can reach the internet only, no visibility of, or access to, anything. This is the kind of work we handle every week, System Admin, Linux, Wireless projects. I would love to do the same for you by reviewing your requirements in detail, agreeing a clear milestone plan, building it with System Admin and Linux, and testing everything before handover. I am happy to go through each point in your post on a quick call before we start. What does a great result look like for you in the first two weeks, so I can plan the first milestone around it? Best Regards, Mobasher Reza

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab