SAI Flexi Printer/Cutter Setup

$15-25 AUD / hour

Posted 1 minute ago

•

Ends in 6 days

$15-25 AUD / hour

I need my new printer / cutter fully configured in SAI Flexi Design as soon as possible. The hardware is already connected; what’s missing is a working media profile, accurate cut/print alignment, and a brief walkthrough so I can repeat the process later without guesswork. If you have hands-on experience pairing printers or vinyl cutters with Flexi, I’d like to hear about it—model names you’ve set up, driver quirks you solved, colour or registration tweaks you handled, anything that shows you know the software beyond the basics. Deliverables I expect: • Remote or on-site session that installs the correct driver, sets default media and colour profiles, and confirms communication between Flexi and the device. • A quick test print/cut proving calibration is correct. • Short written notes or screen recording of the key steps so I can replicate the setup in the future. This is a time-sensitive task, so please let me know when you can start and how long you’ll need once you have access to my system.

Project ID: 40824268

About the project

6 proposals

Open for bidding

Remote project

Active 16 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

6 freelancers are bidding on average $23 AUD/hour for this job

User Avatar
Flag of TURKEY

Hi there, I see that you need a fully configured setup for your printer/cutter in SAI Flexi Design, including a working media profile and alignment calibration. I have hands-on experience configuring various printers and vinyl cutters within Flexi, and I can ensure a smooth installation of the correct driver as well as set up the default media and colour profiles necessary. Once I have access to your system, I can get started right away and will conduct a calibration test print/cut to confirm everything is working perfectly. I’ll also provide either notes or a screen recording of the key steps for you to refer back to in the future. Please let me know your availability, and I can complete this within a day. Regards, Ali

User Avatar
Flag of VIETNAM

Hello I can get your printer and cutter fully dialed in within SAI Flexi today. Having configured numerous Roland, Mimaki, and HP print-and-cut workflows, I specialize in resolving stubborn media profiles, optimizing registration marks, and achieving zero-tolerance print-and-cut alignment. I'll configure your setup remotely, test it thoroughly, and provide a clear, recorded walkthrough so you can repeat the process effortlessly. What specific printer and cutter models are we setting up today? Best regards, Giáp Văn Hưng

User Avatar
Flag of UKRAINE

Hello, I understand you need your printer/cutter fully configured in SAI Flexi Design quickly, with proper media profiling, cut/print alignment, and a simple handoff so you can repeat the setup later. I’m confident I can help with this kind of troubleshooting and setup work. I focus on clean, practical fixes, clear communication, and making sure the final result is easy to use. I can handle: - Driver installation and device communication checks - Media and colour profile setup in Flexi - Cut/print alignment calibration and test output - Short notes or a screen recording for future reference Plan: - Connect and verify the device in Flexi - Configure the correct profile and defaults - Run a test print/cut and tune alignment - Share a short walkthrough of the key steps I can start as soon as you have access ready, and I’ll work efficiently so you can get back up and running fast. Which exact printer/cutter model and Flexi version are you using so I can plan the fastest setup path? Best regards, Ruslan

User Avatar
Flag of SAUDI ARABIA

Getting the printer and cutter communicating with SAI Flexi is only the first step. The media profile, print-to-cut alignment, and registration settings also need to be checked with an actual test job. I'd first confirm the printer/cutter models and Flexi version, then check the driver, device communication, media settings, and calibration. A test print-and-cut should verify alignment before the setup is considered complete. The final handover can include written steps or a screen recording for future use. I don't have documented hands-on SAI Flexi printer/cutter setup experience, so I don't want to claim model-specific expertise I can't verify. Which printer and cutter models are you using, and what version of Flexi Design is installed?

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

用 HomepageTab 新标签页关注 RSS,打开浏览器就能看到更新。

安装 HomepageTab